|
| 1 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 6 way, Double door TPN MCBDB |
| 2 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 3 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 4 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3.5 core 50 sq. mm Al arm. |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 core 25 sq. mm Al arm. |
| 6 | Supply, Testing and Commissioning, fixing of following bare Copper / GI tapes / wires including all necessary fixingaccessories, insulators and effecting connections as per specifications.Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 7 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A `C` curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 8 | Supply of hot dip galvanised Double Arm bracket made up of 40NB dia GI pipe suitable to mount on pole having top 70mm A/F,Length and Tilt angle will be as per light Design . The work is to be carried out as per entire satisfaction of Engineer -in-charge. |
| 9 | SupplyofLEDfloodhavinghousingmadeofpressurediecastaluminiumalloy(ADC12/LM6).Thesystemwattageshallbe 190/200Wand the luminaire shall deliver 24000 lumens. The system efficacy of the luminaire shall be deliver system lumens )2400 lumens .The LEDs used in the luminaire shall be from either Lumileds, Osram, Nichia, APT Electronics and CREE make,shall have CCT of 5700°K, Lifeof50000Hrs@L70B50.TheluminaireshallhaveIPratingofIP66andIKratingofIK07.The luminaire shall have lens made of polycarbonate and optical cover made of toughened glass. The LED driver shall have operating voltage range of 140V to 270V,@ full load,10% @ full load, In-built surge protection of 4KV, HV Cut off @ 325V (±15V). The luminaire shall have 10KV SPD in-built inside the luminaire. The maximum dimensions of the luminaire shall be, L: 380mm, Depth: 77MM with fins/heat sink at back of LED compartment and height without cradle: 192MM. The nominal weight of the luminaire shall be maximum 4KGs.. The luminaire driver and SPD shall be of the same make/manufacturer as that of LED luminaires. LuminairemanufacturermusthaveIn-houseNABLaccreditedlabtoconductLM79,TypetestasperIS10322, `FAT`beforedispatchasperIS10322andIKTest.ThesuccessfulbiddermustsubmittheNABLaccreditationcertificatefor Luminaire manufacturer before supply of materialfor approval. The LED Luminaire and it`s driver both should be BIS registered. Successfulbiddershallsubmitthefollowingreportsbefore supplyofmaterialforapprovalsLM79 issued byNABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire and Driver. Similar to above specs PHILLIPS make.The work is to be carried out as per entire satisfaction of Engineer -in-charge. |
| 10 | Bituminous Concrete 30 mm to 45 mm thickness (grading II) with 100-120 TPH batch type HMP Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications ns |
| 11 | Dense Graded Bituminous Macadam 50 mm to 75 mm thickness (Grading II) Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specification NS |
| 12 | Supplying offollowing 1100 voltgradeXLPE insulated FRLS sheathed Aluminium/Copper conductor armoured/Unarmored cables as per specification complete in all respect as required as per site conditions. Upto satisfaction of engineer incharge.3.5 core 50 sq. mm Al arm.` |
| 13 | Supplying offollowing 1100 voltgradeXLPE insulated FRLS sheathed Aluminium/Copper conductor armoured/Unarmored cables as per specification complete in all respect as required as per site conditions. Upto satisfaction of engineer incharge.4 core 25 sq. mm Al arm.` |
| 14 | Supplying offollowing 1100 voltgradeXLPE insulated FRLS sheathed Aluminium/Copper conductor armoured/Unarmored cables as per specification complete in all respect as required as per site conditions. Upto satisfaction of engineer incharge.4 core6 sq.mmCu arm.` |
| 15 | Supplying offollowing 1100 voltgradeXLPE insulated FRLS sheathed Aluminium/Copper conductor armoured/Unarmored cables as per specification complete in all respect as required as per site conditions. Upto satisfaction of engineer incharge.3 core 4 sq.mmCu arm.` |
| 16 | `Supplying and making Cable end termination of the following XLPE insulated PVC sheathed Aluminium / copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing testing and commissioning complete in all respect as required as per site conditions. Upto satisfaction of engineer incharge.4 core6 sq.mmCu arm.` |
| 17 | `Supplying and making Cable end termination of the following XLPE insulated PVC sheathed Aluminium / copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing testing and commissioning complete in all respect as required as per site conditions. Upto satisfaction of engineer incharge.3 core 4 sq.mmCu arm.` |
| 18 | Wet Mix Macadam. Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.as per technical clause 406 of MORTandH specifications |
| 19 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Above 35 sq. mm and upto 95 sq. mm (DSR 7.3.2) |
| 20 | Supplying and fixing 30 A, 240 V, SPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A `C` curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 21 | Providing andfixing on site synthetic all weather Acrylic Surface for Courts 8 Layer ITF Approved upto satisfaction of engineer incharge.(i) 1 Layer of Filter/ Resurfaces(ii) 2 Layer of Heavy Cushion(iii) 3 Layers Fine Cushion.(iv) 2 Layer of Colour.(v) 1 Layer Court Line Marking. |
| 22 | Providing andfixing on site Basketball poles with boards, rings and nets (tournament model) as per the standard of basketball federation with installationupto satisfaction of engineer incharge.Poles : Size and description Standard pole extension 3.20mtr, Standard Ring height 3.05 Mtrs. Mild Steel Black round pipe with umbrella system 12 Gauge heavy duty 200 mm diameter. High quality PU paints Boards ‘’A’’ Grade Malaysian imported transparent acrylic boards Size 1.80X1.05 Mts. 30MM Thickness with back angle 100% virgin monomer. Rings Three Spring Dunking Rings with nets |
| 23 | Providing and Fixing Electronic Score Board system with LED based of size 600x900 mm mounted on a movable stand of height 3 mtr., connectivity enabled through console and bluetooth. All works complete upto satisfaction of engineer incharge. |
| 24 | Providing andfixing on site Iron Fixed with Sleeves Volleyball Pole, Height 7 foot upto satisfaction of engineer incharge.Technical SpecificationPole Diameter : 4 inch Height adjustable : 3 footType : Fixed with Sleeves Material of pole : Iron Material of Base: Iron Height of pole : 7 foot Weight (each side) : 25 kilogram Number of plate : 2 |
| 25 | Supply and installation of Cast aluminium alloy with green / Black powder coated finish Tennis post including post caps, gear housings, flush mounted ,removable handle, jamfree cable tensioning hardware system and superior hardened gears case and ground sleeves, and 42` long Tennis Net consist of 3mm High Tensile Braided Twine and black/white PVC Banding 2 1/2` on net Side and Bottom Headline Cable - 6mm PVC Coated Steel Cable. With Loop and Pin Finish etc complete as per the direction of Engineer |
| 26 | Supply of LED Post Top with 30 W light made of Die Cast Aluminium housing to be welded with arm brackets as per reference.Post top have IP65 optical compartment and driver compartment to make it water proof. Powered with Osram/Phillips/Havells LED and have water proof driver. Wattage 30 W and 4000K colour temperature. Powder Coated with UV stablize PP powder Coating. Best suitable for pole 48mm to 60mm. Complete with all accessories. All works upto satisfaction of engineer incharge. |
| 27 | Supply of Decorative Step Pole 3 mtr. height made of MS tubular pipe. Supply of decorative pole in 3mtr height withwith bottom section of 1mtr dia 90mm and top section of 2mtr dia 76 with spigot. The base plate dimension 200x200x10mm The Service door shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. Pole to be metallic pre treated to make it fine and coarse free. Pole to be final coated with epoxy primer to make it alkaline proof to avoid the rust with final coated with UV stablize PU paint to make it UV stablized. The Pole should contain cast Aluminium embellishments and Two arm bracket with 42 dia pipe curved design as per selected architectural design. The pole is complete in all aspects with all accessories with foundation bolt. All works upto satisfaction of engineer incharge. |
| 28 | Supply of Decorative Step Pole 7 mtr. height made of MS tubular pipe. Supply of decorative pole in 7mtr height with bottom section of 2mtr ht - dia 114mm and mid section of 3mtr ht- dia 76mm andtop section 2mtr ht- dia 60mm, The base plate dimension 200x200x10mm. The Service door shallbe provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. Pole to be metallic pre treated to make it fine and coarse free. Pole to be final coated with epoxy primer to make it alkaline proof to avoid the rust with final coated with UV stablize PU paint to make it UV stablized. The Pole should contain cast Aluminium embellishments and Two arm bracket with 42 dia pipe curved design as per selected architectural design. The pole is complete in all aspects with all accessories with foundation bolt. |
| 29 | Supply of LED Post Top with 60 W light made of Aluminium housing to be welded with arm brackets as per reference. Post top have IP65 optical compartment and driver compartment to make it water proof. Powered with Osram/Phillips/Havells LED and have water proof driver.Wattage 60 W and 4000K colour temperature. Powder Coated with UV stablize PP powder Coating.Best suitable for pole 48mm to 60mm. Complete with all accessories. All works upto satisfaction of engineer incharge. |
| 30 | Designing, Providing, fabricating, assembling and erection of Architectural Structure Roofing structure with M.S. Tubular Framework (As per Is Steel) with SS cable andaccessories if required as per design in desired profile as indicated in Masterplan.Membrane shall be PVDF/ PVDF coated with Total weight of the fabric as 750 g/m²,minimum Width-250mm, minimum Tensile Strength (Warp/ Weft) - 280/ 280 daN/ 5cm, minimum Tear Strength (Warp/ Weft) - 30/ 28 daN., as per manufacturing and supplying standards by Membrane manufacturers. Fabric shall have high Fire behavior Class Bs2d0 – EN 1350-1 and Micro Organism Resistance and Warranty of 10 years. Expert Vendors/Applicators/Installers for the Project shall need to have Authorised letter from OEM.*Warranty Certificate from OEM required. |
| 31 | Supply of precast concrete drain cover of size 600X450X100MM,manufactured by M-30 grade of concrete with GMDA Logo |
| 32 | Supply of precast concrete drain cover of size 900X450X90MM,Manufactured by M-30 grade of concrete with GMDA Logo |
| 33 | Supply of precast concrete saucer drain of size 900X300X75MM, Manufactured by M-30 grade of concrete with GMDA Logo |
| 34 | Providing and Fixing factory made chain link fencing with 2mm PVC coated ,it includes ? 76 mm (OD) 3 mm thick wire with 2 mm PVC coated factory finished vertical post fixed on embedded 400 x400 x600 mm reinforced concrete foundation or fastening with anchor fastener on reinforced concrete wall at 3 mtr center to center distance with 3 Meter height, ? 60 mm (OD) 3 mm thick HORIZANTAL post , Horizontal post should be factory finished PVC coated installed at Top , Middle and Bottom location with the help of special connectors. 2.4-2.5 mm thick PVC coated galvanized steel chain link fence fabric mesh of size 50mm X 50 mm x 6 mtr , fixed to vertical post and Three horizontal post with the help of 3 mm thick extruded Aluminum flat with PVC coated finish and self-tapping screw. 3 mm thick special Connectors made from pressed steel and powder coated finish for connecting Vertical and horizontal post by using M12 X 90 bolt at every joint and corner of horizontal and vertical post without welded joints for easy installation and removable. Complete including installation of opening gates as per requirement as per the direction upto satisfaction of Engineer in charge |
| 35 | Providing and fixing including Installation of FIFA approved Synthetic Football Turf with UVresistance from America, Europe and Australian region only conforming to FIFA Quality Standard as per their Latest Technical Specification FIFA 15. 50 mm Football Turf double tone of International FIFA Standards of 16000 Dtex with rolls of 4 m X 30 m Each , Stitch Rate 14/10 cm , BackingPPplus PU.Including SBR Rubber granules of 2-4 mm as per FIFA standards 11 Kg per sqm , unloading and staging of rolls, sewing of seams, infilling with appropriate dispensing, spreading and leveling equipment, brushing of fibers with all poly hydraulic controlled equipment, painting of any lines with approved synthetic turf paint. Along with laying and spreading of silica sand of 20mm layer on the turf upto satisfaction of engineer incharge. |
| 36 | Providing and Fixing in place of Vertical MS Poles of 100mm , 7.6 meter height and horizontal pole at topbottom and middle of required size withreinforcedconcrete foundation for poles including painting,fabrication and installation of poles with GI wire of 6mm setup for holding shed cage with net wire.Height of cage net above ground level to be 7.6 meter. -Providing and fixing 100mm Square M.S Pole for vertical support -Providing and fixing 50mm square M.S Pole for Horizontal support-Providing and fixing 50mm Square M.S Pole for Side support -Using 6mm GI Coated wire rope with turn buckle for top net supportfor holding shed cage with net wire.Installation of net with nylon ropes of 2.5 mm special garware net of 50 mm mesh in dark green colour for cage(both boundaryplusceiling).-Making 2 Nos of Goal Post -Making Entry and Exit two gates of 2100 mm x 900 -Brackets for Flood Lights |
| 37 | Dense 12 mm turf for pedal tennis with seven year warranty. Approved By Spanish Pedal TENNIS ASSOCIATION. 8000plusDtex and 40000 Stitches per SQMplus Sand Dressed (10kg/sqm) . Including Silica Sand, Glue and Tape and proper installation. All works complete as per the standards and up to satisfaction of engineer in charge. |
| 38 | Supplying and erection of structure including fence panels supported with steel post, glass panels, net poles and net for Padel Court system all complete as per International Standard and Quality and drawings including• Providing and Fixing in place of Vertical MS Steel Post of 100mm , 3 meter height and horizontal pole at top and bottom of required size including MS Plates to be fastened on existing reinforced concrete foundation for vertical post including painting, fabrication and installation of post.• Providing and fixing of Chain Link Fence joined to the Vertical MS Post with top and bottom members on both side and on top of the glass on front, back and side as per the International Tennis Federation’s Guidelines and drawings.(132sqm approx)• Providing and fixing of 12 mm thick toughened glass, smooth polish edge, perfect planimetry and fully homologous system to absorb the shock and vibration of the glass against the metal structure, EPDM rubber joints of the highest quality, the same thickness as the metal section. Anchoring of tempered glass with counter sunk screws protected by A4 stainless-steel and M10 metric, UV resistant plastic covers. (108 sqm approx)• Two large open entrances are made in the centre of the field to facilitate the fast and safe entry and exit of the players. Optional: folding or sliding doors can be installed.• All screws are A4 stainless-steel and M10 metric: UV-resistant nylon protective washers are also used with the glass. Wide metal anchor bolts of M12 / Ø16 × 110 to be used.All works complete as per the standards and up to satisfaction of engineer in charge. |
| 39 | Design, fabrication, assembling, wiring and supply, installation, testing and commissioning of Main LT Panels fabricated out of (load bearing member of 2mm and non load bearing member 1.6 mm thick) CRCA sheet steel in cubicle compartmentised modular 4b construction, free standing floor mounted with bottom cable entry, dust and vermin proof with reinforcement of suitable size angle iron, channel, T` sections and/or flats wherever necessary, 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 Nos, earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels. Incoming and outgoing per SLD design. All works complete upto satisfaction of engineer incharge. Feeder Pillar |
| 40 | Design, fabrication, assembling, wiring and supply, installation, testing and commissioning of Main LT Panels fabricated out of (load bearing member of 2mm and non load bearing member 1.6 mm thick) CRCA sheet steel in cubicle compartmentised modular 4b construction, free standing floor mounted with bottom cable entry, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T` sections and/or flats wherever necessary. 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 Nos. earthing terminals shall be provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels. Incoming and outgoing per SLD design. All works complete upto satisfaction of engineer incharge. Main LT Panel |
| 41 | Supply of hot dip galvanised Four way Floodlight Ring of 1500mm diameter made up of 40NB dia GI pipe suitable to mount on pole having top 70mm A/Fsuitable for floodlight mounting as per light Design . The work is to be carried out with installation complete as per entire satisfaction of Engineer -in-charge. |
| 42 | Granular Sub-Base with Coarse Graded Material - Grading- Ill Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with mortar grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MORTandH specifications. |
| 43 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85kg/sqm using mechanical means as per technical clause 503 of MORTandH specifications |
| 44 | Providing and applying tack coat with bitumen emulsion using VG-10 pressure distributor at the rate of 0.25 kg per sqm. on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications. |
| 45 | Recovery- Credit of Kerb Stone(The amount computed by rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. kerb stones obtained from dismantling of existing median, islands has been calculated taking assumption that 70% of existing kerb stones will be retrieved and can be reused by the contractor at any other site. The reverse rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below reserve price will be considered for all purpose in case the agency quotes lesser than reserve price. The price quoted against the recovery of existing kerb stones shall have minimum reserve price of Rs. 1987/- per cum.) |
| 46 | Recovery item-Credit of unusable material received from milling of BC i.e. 80% of obtained material(deduction). The quantities of the above material have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual scarifying/milling and if material after milling is found on lesser side, no claim of agency on this score will be entertained and full recover on the basis of quoted rate and quantity exhibited in the BOQ shall be made, the reverse rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below reserve price will be considered for all purpose in case the agency quotes lesser than reserve price. The price quoted against the recovery material shall have minimum reserve price of 2109.43/- per cum). |
