Tender For Estimate For Electrification Of Piproda Alam Pathar 456277 Census Code Habitation And Hhs Under Pvtg Scheme Electrification Of 11 No Hhs Of Pathar Mohalla Adiwasi Habitation Under Pvtg Scheme Under Khaniyadhana R D/C Under Onm Dn Pichhore
Tender Value
1.69 Lakhs
Estimated cost
Bid Submission
28 Jan 2025
0 days left
EMD
5100
Bank guarantee accepted
Document Fee
236
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pichhore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For Electrification Of Piproda Alam Pathar 456277 Census Code Habitation And Hhs Under Pvtg Scheme Electrification Of 11 No Hhs Of Pathar Mohalla Adiwasi Habitation Under Pvtg Scheme Under Khaniyadhana R D/C Under Onm Dn Pichhore 125889
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 3 | Labour Charge for installation (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 4 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 5 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 6 | Transformer Belting Set 50X50X6 MM Angle with Two cross fixing channel |
| 7 | 140KG 8 mtr long PCC Pole |
| 8 | Labour Charge for digging and erection of 140KG 8 mtr long PCC Pole |
| 9 | PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 10 | Labour Charge for PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 11 | XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 12 | Labour charge for XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 13 | XLPE 1 core unarmoured 70 Sqmm aluminium conductor 1100 volts |
| 14 | Labour charge for XLPE 1 core unarmoured 70 Sqmm aluminium conductor 1100 volts |
| 15 | AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 16 | Labour Charge for stringing AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 17 | 11 KV D.O. Fuse unit Polymer type |
| 18 | Labour Charge for fixing of 11 KV D.O. Fuse unit Polymer type |
| 19 | 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 20 | Labour charge for 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 21 | 11 KV Composit Polymer Disc insulator |
| 22 | 11 KV Strain Hardware (T&C type) fittings |
| 23 | 11 KV polymer Pin Insulator |
| 24 | ( Labour Charge)11 KV polymer Pin Insulator |
| 25 | 11 KV V Cross Arm 65x65x6 mm Angle type |
| 26 | Labour Charge for 11 KV V Cross Arm 65x65x6 mm Angle type |
| 27 | 11 KV top Clamp 65x65x6 mm Angle type |
| 28 | labour charge for 11 KV top Clamp 65x65x6 mm Angle type |
| 29 | D.C. Cross arms 4\" Center to center(100x50x6mm) channel |
| 30 | Labour Charge for fixing ofD.C. Cross arms 4\" Center to center(100x50x6mm) channel |
| 31 | Transformer mounting Channel (100x50x6 mm) |
| 32 | Labour Charge for fixing Transformer Mounting Channel (100x50x6 mm) |
| 33 | Horizontal and cross bracing 4\" center (50x50x6mm) along with Disc & Hardware |
| 34 | Labour charge for fixing of Horizontal and cross bracing 4\" center (50x50x6mm) |
| 35 | Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 36 | Labour charge for Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 37 | Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 38 | Labour Charge for Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 39 | Meter instalation Structure (50x50x6 mm angle Type) for Kaccha house |
| 40 | Labour Charge for Febrication & instalation of Meter Structure (50x50x6 mm angle Type) for Kaccha House |
| 41 | Concreting of (50x50x6 mm) angle meter structure for kaccha house (0.05 cmt per structure) |
| 42 | Labour Charge for Concreting of (50x50x6 mm) angle meter structure for kaccha house(0.05 cmt per structure) |
| 43 | Stay Insulator 90X65 |
| 44 | Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 45 | Labour Charge for fixing of Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 46 | D.O. Mounting Channel 75x40x6 mm |
| 47 | Labour Charge for fixing ofD.O. Mounting Channel 75x40x6 mm |
| 48 | Stay set complete without Stay wire 16 mm (Painted) |
| 49 | Labour Charge for fixing ofStay set complete with Stay wire 16 mm (Painted) |
| 50 | Stay wire 7/3.15 MM (7/10 SWG) |
| 51 | G.I. Wires 4.0 MM (8SWG) |
| 52 | G.I. Strip 25x3 mm1 |
| 53 | labour charge for G.I. Strip 25x3 mm1 |
| 54 | G.I. Pipe 40 mm Dia c Grade type |
| 55 | Labour charge for G.I. Pipe 40 mm Dia c Grade type |
| 56 | Bentonite compound powder |
| 57 | Clamp for 140 KG PCC pole MS Flat 50x6 mm MS Flat ( 65x8 mm) |
| 58 | Back Clamp for 140 KG Pcc Pole MS Flat ( 50x6 mm) |
| 59 | Stone Block/Per cast block for base pedding(450x450x75mm) |
| 60 | Back Filling of pole with boulders |
| 61 | Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 62 | Labour Charge for Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 63 | Concreting of structure & amp foundation (1:3:6) |
| 64 | Labour Charge for Concreting of structure & amp foundation (1:3:6) |
| 65 | Meter cum protection box for 25 KVA DTR |
| 66 | Labour Charge for Meter cum protection box for 25 KVA DTR |
| 67 | Red oxide paint |
| 68 | Labour Charge forRed oxide paint |
| 69 | Aluminium paint |
| 70 | Labour Charge for Aluminium paint |
| 71 | M.S.Nuts and Bolts |
| 72 | Galvanized nut & Bolt with washar |
| 73 | Danger Board Enamelled 11 KV |
| 74 | Labour Charge forDanger Board Enamelled 11 KV |
| 75 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr. Lead of 4.0 MM G.I. Wire |
| 76 | Earthing for PCC pole 4.00 mm-8 SWG G.I. wire 0.8 KG per pole |
| 77 | Aluminium binding wire and tape |
| 78 | jointing sleeves suitable for rabbit (55Sq.mm Al .Eq) AAAC conductor |
| 79 | Labour charge for Complete jumpering of DTR |
| 80 | Miscelleaneous Charges For New Service Connection |
| 81 | MCB OF 16 AMP |
| 82 | PVC/Rubber Bushes |
| 83 | 3 pin 5A socket ( Two no piano type switch bulb bakelite holder with wiring & amp E) |
| 84 | Switch Board |
| 85 | Wooden Board 10\"\"x8\"\" |
| 86 | Rack Bolt/Screw |
| 87 | LED Lamp with 9 watt (Complete) |
| 88 | A.B Cable hanging clamps/ tension clamps (Galvanized) as perenclosed Drawing |
| 89 | Labour Charge for fixing of A.B Cable hanging clamps/ tension clamps (Galvanized) as per enclosed Drawing |
| 90 | SUSPENSION CLAMP FOR LT AB CABLE |
| 91 | Labour Charge for fixing ofSUSPENSION CLAMP FOR LT AB CABLE |
| 92 | Clamps for neutral for AB Cable |
| 93 | labour charge of Clamps for neutral for AB Cable |
| 94 | PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 95 | Labour Charge for PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 96 | PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 97 | Labour Charge for PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 98 | single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 99 | Labour Charge for installation single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 100 | SGST @ 9% |
| 101 | CGST @9% |
AI Tender Summary
Tender Timeline
Jan 22, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 29, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender