|
| 1 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 2 | Dismantling posts/pillers or struts (Wood, Steel, or RCC) any section, including taking out embedded portion and making good disturbed ground. |
| 3 | Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil. |
| 4 | M & L,cement concrete 1 : 3 : 6 type C2 (40 mm graded aggregate) as in fdn, filling and mass concrete, complete all as specified and directed. |
| 5 | M&L for framed work such as grills, gratings, gates etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar worksincluding fixing to channel section using MS bearing hinges to frame confirming to Fe-290 grade-E-165 including two coats of synthetic enamel paint over a one coat of red oxide complete all as specified and directred by engr-in-charge. |
| 6 | M&L,MS TMT bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm diacomplete all as specified and directed. |
| 7 | Supply only Chain link MS galvanisd fencing, any size or type all as specified and directed. |
| 8 | Fixing only chain link fencing, any mesh, including line wires, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire or welding work complete all as specified and directed. |
| 9 | S&F mild steel flat iron fillets for securing wire mesh etc., incl. all necessary drilling or riveting, etc., and smilar work conforming to Fe 290 gde E-165 including two coats of synthetic enamel paint over a one coat of red oxide complete all as specified and directred by engr-in-charge. |
| 10 | S&F 12mm dia of mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagoanl or sqare nut, nexc 15cm long. |
| 11 | Dismantling of asbestos cement (corrugated,semi corrugated,rtc.)sheets in roof coverings complete all as specified and directred by engr-in-charge |
| 12 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated (Trapizoidal profile) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, as in roofcovering/cladding to wall, fixed with self tapping screws complete all as specified and directred by engr-in-charge |
| 13 | Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 14 | M&L Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as dierected. |
| 15 | M&L for 100 mm thick cement concrete type D-2, 1:4:8 using (40mm graded aggregate) complete all as specified and directed. |
| 16 | M&L 100 mm thick PCC 1:2:4 Type B1 (20mm graded aggregate) as in sub floors complete all as specified. |
| 17 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises. |
| 18 | M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 complete all as specified and directed. |
| 19 | M&L for prepolished coloured cement concrete chequred/heavy duty parkingtiles 300 x 300 x 25mm thick,in floors etc .set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
