Tender For Special Repair To Certain Road At Mil Stn Banbasa Under Ge Pithoragarh
Tender Value
43.69 Lakhs
Estimated cost
Bid Submission
19 Feb 2025
0 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
banbasa → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Road At Mil Stn Banbasa Under Ge Pithoragarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Feb-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Feb-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 2 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer paving bitumen with viscosity grade VG-10 at 5 kg per 10 sqm on existing black top surfaces complete all as specified and directed. |
| 3 | M&L for bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content of bitumen with viscosity grade VG-30 by weight of total mix, rolled and compacted to required camber and gradient complete with 8 to 10 tonnes power roller to required complete all as specified and directed. |
| 4 | M&L for premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/ rolled and compacted to required gradient and camber (consolidated thickness 75mm or less)complete all as specified and directed. Note for item No. 03 & 04 : (i)Aggregates for Bituminous works shall confirm to clause No 20.B.2.5of SSR 2009 Part- I(ii) Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 60.00 per kg rate of bitumen (less consumption) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula. (iii) Design Mix for bituminous macadam and SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. |
| 5 | M&L for laying hot applied termoplastic compound (paint) 2.5mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No 803 as per IRC. Painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 Cm wide with road marking paint, white or golden yellow complete all as specified and directed. |
| 6 | S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 7 | M&L for Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 8 | Removing surplus excavated materialn. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 9 | M&L 75 mm thick PCC 1:4:8type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 10 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 11 | M&L for providing cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in roof kerbs or mud stops,coping,rounded or chamfered on edges, weathering throughting including necessary formwork finished surface even and smooth without using extra cement complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Feb 12, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 19, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 19, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender