|
| 1 | Earth work in excavation of foundation in all kinds of soil including dressing and levelling the foundation bed and depositing the excavated materials clear of work site with all leads, lifts, delifts and dewatering & shoring including removing bushes, stumps and any other foreign materials from the working area as well as from the foundation trenches with cost of all labour, T&P, hire and running charges of all machineries, labour cess etc. complete in all respects as per specification and direction ofthe Engineer-in-Charge. |
| 2 | Filling in foundation & plinth with sand well watered to saturated condition and rammed including all cost, carriage, royalty, taxes of materials with all labour charges cess etc. complete as per the direction of the Engineer-in-Charge. |
| 3 | Cement Concrete(1:3:6) with 40mm size hard granite crusher broken metal confirming to relevant BIS specifications with all cost, conveyance, royalty of all materials T&P, cess including scaffolding, walkways & properly mixing, hoisting & placing concrete to desiredworkability & curing for recommended periodetc. complete as per the direction of the Engineer-in-Charge. |
| 4 | Brick work withFly ash Bricks25cmx 12cm x 8cm size having crushing strength not less than 75kg / sqcm with dimensional tolerance±8 percent in cement motar (1.6) in foundation including all cost of materials conveyance, royalty and all other taxes including watering and curring etc. complete as per the direction of the Engineer-in-Charge. |
| 5 | Brick work withFly ash Bricks25cmx 12cm x 8cm size having crushing strength not less than 75kg / sqcm with dimensional tolerance±8 percent in cement motar (1.6) in Superstructure including all cost of materials conveyance, royalty and all other taxes including watering and curring etc. complete as per the direction of the Engineer-in-Charge. |
| 6 | Cement Concrete M-20 with 20mm and downgraded size hard granite crusher broken chips for PCC / RCC work confirming to relevant BIS specifications for all materials including scaffolding, walkways & properly mixing, hoisting & laying with desired workability with all cost, conveyance, royalty of all materials, T&P labour charges, cess etc. complete including curring for recommended period as per the direction of the Engineer-in-Charge. (Column Base & footing) |
| 7 | Plinth beam |
| 8 | Lintels |
| 9 | Chajja |
| 10 | Columns and Beams |
| 11 | Roof Slab |
| 12 | Supplying, fitting, fixing of HYSD including labour charges for straightening, cutting, bending and binding the H.Y.S.D. Bar or tor steel and tying the grills and placing in position (confirming to I.S.I specification) including jointing if necessary by lapping, welding as required for R.C.C work as per approved drawing and design & binding with binding wire 18 to 20 gauge including cost carriage and other taxes of all materials with all leads, lifts & delifts of reinforcement bars etc. complete as per the direction of the Engineer-in-charge |
| 13 | 20mm thick cement plaster in cement mortar (1:4) as grading plaster in roof and slab confirming to BIS specifications with allcost, conveyance, royalty and labour charges, cess including scaffolding and curring for recommended period etc complete as per the direction of the Engineer-in-Charge. |
| 14 | Cement Concrete(1:4:8) with 40mm size and downgraded hard granite crusher broken metal confirming to relevant BIS specifications with all cost, conveyance, royalty of all materials T&P, cess including scaffolding, walkways & properly mixing, hoisting & placing concrete to desiredworkability & curing for recommended periodetc. complete as per the direction of the Engineer-in-Charge. |
| 15 | Supplying, fitting and fixing of vitrified tiles in landing treads of stapes and floors of size 600mm x 600mm of approved make conforming to IS 13755 laid on 20mm thick cement morter bed (1:4) and the jointed with white cement of approved quality including cost, carriage, taxes all materials and royalty of sand including all labour T&P etc. required with all lead lift & delifts for all floors etc. complete in all respects as per specification and direction of the Engineer-In-Charge. |
| 16 | Providing 12 mm thick cement plaster with cement mortar of mix (1:3) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete as per direction of the Engineer-in-Charge. |
| 17 | Providing 6mm thick cement plastering (1:4) to RCC surfaces finished smooth including closed chipping, cleaning, adding adhesive to slurry treatment etc. all cost, carriage, royalty of materials, labourand all other taxes of materials with watering, curingetc complete as per the direction of the Engineer-in-Charge |
| 18 | Providing 16 mm thick cement plaster with cement mortar (1:6) over brick masonry including mixing of mortar and curing with cost, carriage, royalty of all materials & all labour charge, T&P etc. complete as per direction of the Engineer-in-Charge. |
| 19 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete as per direction of the Engineer-in-Charge |
| 20 | Finishing walls with water proofing weather coat of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 21 | Finishing walls with plastic emulsion paint of approved colour to approved shade two coats over a coat of primer to give an even shade including cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer-in-Charge. |
| 22 | Supply, fitting & fixing of G.I. made gates, doors & windows frame with shutters as per approved design including cost of all ornamental materilas & all other taxes etc. complete as per the direction of the Engineer-in-charge. |
| 23 | Painting two coats over a coat of primer with any approved paint with brush to GI door including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 24 | Supplying, fitting and fixing of stainless stell of 304 grade in hand railling using 50mm dia of 20mm thick circular pipe with balustrade of size 32mm x 2mm @0.90m C/C and stainless steel square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per aproved design and specification, buffing, polishing etc with cost, conveyance, taxes of materials, labour T&P etc. complete as per direction of the Engineer-in-Charge. |
