Tender For Renovation /Up Gradation Of 03 No (120 Men) Jawan Barrack Cook Houses At 49Th Bn Itbp, Basar
Tender Value
16.56 Lakhs
Estimated cost
Bid Submission
10 Feb 2025
0 days left
EMD
33124
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basar → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation /Up gradation Of 03 No (120 Men) Jawan Barrack Cook Houses At 49Th Bn Itbp, Basar
BOQ
| Sl. No. | Item Description |
| 1 | Details of items |
| 2 | Providing and fixingManufacturer Fabricated ISLAND SS Exhaust Suction hood with filter size 2.4x1.5x0.5 MtrBody: Hood body constructed of22 gauge SS 202 Grade sheet, All welded construction without any nuts & bolts except field joint. Baffle Filters: Unit will be provide Baffle type grease filters with handle & set at an angle of 45°. In full length with bottom of filters set in continues channel smooth clean wiping grease gutter on rear sides only. LED Light: Full length LED light fixture with heat proof wiring. Grease Drawer : Bottom of hood will be provided with 18 gauge SS 304 Grade grease drawer with integral Approved Brand & Manufacturers: |
| 3 | Providing and fixingManufacturer Fabricated Wall shelf size - 1500 x 300 mm (Shelf in 18 swg SS 304 sheet, 3 sides bent down 38mm & 12mm , rear bent up 38 mm & hemmed 12 mm.Brackets 225 mm high in 16 swg sheet at a C/C gap not exceeding 600 mm.25mm gap to be provided wall and shelf rear. Brackets to be bolted to SS studs on the underside of shelf by dome shaped nuts.All SS a ISI 304 grade. |
| 4 | Supplying, Installation, Commissioning & Testing of Factory fabricated galvanised steel sheet 0.63mm thick metal ducts size- 0.45Mtr Square shapee including elbows, turning vanes, neoprene / PVC fire retardant gaskets, sealant, slip on flanges and supporting arrangement in accordance with SMACNA specifications and standards including accessories to be fixed at truss / purlin slab etc. as required and instructed at site. Gripple Wire & Steel supports are listed under separate head below. |
| 5 | Supply, Installation, Commissioning & Testing of Mild steel industrial blower fan (power-3 KW, material-mild steel, voltage-220 to 380 V, power Source- electric, frequency- 50 Hz, Speed - 960 to 2900 rpm)with necessary arrangements as per direction of engineer in-charge |
| 6 | Providing and fixing Steel work for supporting the supply air ducts including welding of cleats on the supports to restrict the lateral movement of ducts over supports and nuts-bolts etc as required. |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.:125 mm |
| 10 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) |
| 11 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in |
| 12 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in- charge. |
| 13 | Providing and fixing soil, waste and vent pipes : 100 mm diaHubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 14 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loopearthing as required |
AI Tender Summary
Tender Timeline
Jan 21, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender