|
| 1 | Maintenance and overhauling of V.T. / inclined pumps as per manufacturers instruction manual with all tools, tackles etc. This job includes labour charges, consumables like O - ring, sundry cleaning material etc. This job includes dismantling of all sub assemblies such as gear box, cooling pipes, bearing housing, stuffing box, discharge mouth, strainer, line shaft enclosing tube etc. Reconditioning of all parts, inspection of all parts & replace these parts as per instructions (spares cost excluded) straightening of shafts & refitting of all parts & sub aasemblies with proper alighment including motor removing & refixing, test & trial for 24 hrs etc complete.ii) Capacity above 5 cusec and upto 25 cusec pump |
| 2 | Maintenance and overhauling of cooling and lubricating system as per manufacturers instruction manual with all tools, tackles etc. This job includes labour charges, sundry cleaning material etc. This job includes inspection, checking and cleaning of all parts and replacement of damaged parts as per instructions ( spare costincluded) and refitting of all parts & assemblies with proper alighment & test & trial for 24 hrs. etc complete as per direction |
| 3 | Manufacture and supply of pump spares/components as per specification, drawing or existing one with proper tolerence and finish as per direction |
| 4 | i) Transmission bearing/bowl bearing/rubber bearing (Material: Neo rubberLND BR 2 Shell) |
| 5 | ii) Bowl bush (Material :GM Grade LTB 2 & 5 IS-318) |
| 6 | iii) Shaft sleeve / gland sleeve (Material: ST ASTM 276-316 ANLD) |
| 7 | iv) Transmission shaft/ head shaft/ impeller shaft(Material: ST ASTM 276-316 ANLD) |
| 8 | v) Threaded shaft coupling(Material C45, IS-1570) |
| 9 | vi) Ratchet housing/ Ratchet cover ( Material: CI FG200 IS-210) |
| 10 | vii) Coupling Pin (Mat. CS IS1570-40c8 HOT RLD) in motor coupling. |
| 11 | viii) Bearing spider ( Mat: FG 260 IS 210) |
| 12 | ix) Impeller lock nut/ adjusting nut ( Material: GM) |
| 13 | x) Ratchet Pin/ Pin (Mat. EN 24) |
| 14 | xi) Neoprene rubber bush |
| 15 | Supplying, fitting, fixing bolts with nuts, washer:(i) 10 to 16 mm dia: |
| 16 | (a) Length up to 75 mm |
| 17 | (b) Length above 75 mm and upto 150 mm. |
| 18 | Carring out the dynamic balancing of the bowl assembly from the competent agent and witnessed by the Dept. eng( Not below the rank of J.E.)as per direction of EIC. |
| 19 | Transportation charges for carrying pump components from site to work shop and workshop to site. ( For single transportation 1 job) |
| 20 | Manpower for loading and unloading pump components. |
| 21 | Painting of gates of distributiory/ branch/minor canal/ pump coloum pipe/ pump discharge pipe & other similar components on prepared surfaces with one coats of zinc phospahte primer ( airless spray preffered) 50 microns/ coat and one coal tar epoxy, 150 microns/ coat including cost of all materials, labour, scaffolding etc, complete with all leads and all lifts. |
| 22 | Added GST @ 18% |
| 23 | Added:- @ 1% as labour cess |
