Tender For Supply Installation Testing And Commissioning Of Fire Fighting And Fire Alarm System In Niryat Bhawan Bida Bhadohi
Tender Value
43.27 Lakhs
Estimated cost
Bid Submission
10 Feb 2025
0 days left
EMD
4.32 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhadohi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply Installation Testing And Commissioning Of Fire Fighting And Fire Alarm System In Niryat Bhawan Bida Bhadohi
BOQ
| Sl. No. | Item Description |
| 1 | Fire Fighting Work |
| 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 3 | Providing and laying, testing, & commissioning of \" C \"class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbow, tees, flanges, tapes, nut/bolt, gasket etc and fixing the pipe on the wall/ceilling with suitable clamps/support frame and painting with two or more coats of synthetic enamel paint of required shade complete in all respect.150mm nominal bore (pump room, external hydrant, FBI & siamese connection pipe, pump room to FFTG shaft) |
| 4 | Supplying and fixing of the Fire brigade connection of cast iron body with gun metal male instantaneous inlet coupling complete with cap and chain as reqd for suitable dia MS pipe connection conforming to IS 904 as rquired for 4 way-150 mm dia MS pipe |
| 5 | Providing & fixing of pressure switch in MS pipe line including connection ectc as required |
| 6 | Providing and fixing in position the industrial type pressure gauge with gun metal / brass valves complete as required. |
| 7 | Supplying, fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze/gun metal seat duly ISI marked complete with nuts, bolts washers, gasketconforming to IS 13095 of 150 mm dia. |
| 8 | 100 mm dia |
| 9 | 80 mm dia |
| 10 | 50 mm dia |
| 11 | Providing, installation, testing and commissioning of 150 mm dia non-return valve confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc as required. |
| 12 | 80 mm dia |
| 13 | 50 mm dia |
| 14 | Providing, installation, testing and commissioning of Stainless Steet Y Stainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia holes with stainless steel flange. |
| 15 | 150 mm dia |
| 16 | 100 mm dia |
| 17 | Providing and Fixing 25 mm Ball Valve (Brass) of approved quality, High or Low Pressure, with Plastik Floats Complete in all respect |
| 18 | Providing and Fixing 50 mm Gate Valve (Gun Metal) with CI wheel of approved quality, screwed end Complete in all respect |
| 19 | Providing and placingon Terrace polyethylene water storage tank , IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for Inlet, Outlet and Overflow pipes but without fitting and the base support for Tank. |
| 20 | Providing and placingon Terrace polyethylene water storage tank , IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for Inlet, Outlet and Overflow pipes but without fitting and the base support for Tank. |
| 21 | Providing and Fixing 100 mm Foot Valve (C.I.) with all necessary accessories, of approved quality and releavent standard/code, Complete in all respect |
| 22 | Providing and Fixing 150 mm Foot Valve (C.I.) with all necessary accessories, of approved quality and releavent standard/code, Complete in all respect |
| 23 | Providing, laying, testing and commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbows, tees, flanges, tapers, nut bolts, gasket etc and fixing the pipe on the wall/ceilling with suitable clamps/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 24 | 80 mm nominal bore |
| 25 | 150 mm nominal bore |
| 26 | Supplying and fixing of single headed internal hydrant valve with instantaneous Gunmetal/Stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank gunmetal /Stainless steel cap and chain as required: |
| 27 | Single headed Gunmetal |
| 28 | Supplying and fixing first aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type-2 as per IS:1258520 mm nominal internal dia gun metal globe valve &nozzle. Drum and brackets for fixing the equipments on wall. Connection from riser with 25mm dia stop gun metal valve & MS pipe and socket.40 m |
| 29 | Supply and fixing 63mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc conforming to IS 636 (type-A) as required Gun metal |
| 30 | Supplying and Fixing 63mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Gun metal |
| 31 | Providing and fixing standard fire mans axe with heavy duty insulated rubber handle. |
| 32 | Providing and Fixing Fire Hose Cabinet with double door, ( Size750X250X600 mm) , complete in all respect with approved quality/ releavent standard/IS Code. |
| 33 | Supplying and fixing of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 34 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinkler of rating 68 degree centigrade with required accessoriesHorizontal Side Wall Sprinkler |
| 35 | Providing, laying, tesing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting, like elbows, tees, flanges, tapers, nuts bolts, gasket etc and fixing the pipe on the wall /ceilling with suitable clamps/support frame and painting with two coat or more coats of synthetic enamel paint of required shade complete as required. |
| 36 | 100mm nominal bore |
| 37 | 80mm nominal bore |
| 38 | 65mm nominal bore |
| 39 | 50mm nominal bore |
| 40 | 25mm nominal bore |
| 41 | Providing and fixing flow switch in 150mm dia MS pipe including connection etc as required. |
| 42 | Suplying, installation, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts bolts, washers, gasket conforming to IS 13095 of following sizes as required:100 MM dia |
| 43 | SITC of Electric Driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respect, as requiredA) Horizontal Type Multistage Centrifugal Split Casing, Pump of cast iron body and bronze impeller with stainless steel shaft mechanbical seal conforming to IS 1520.B) Suitable HP Squirrel Cage Induction Motor, TEFC, Synchronus Speed 1500 RPM,Suitable for operation on 415V 3 Phase 50Hz AC Supply with IP55 Protection for enclosure, horizontal foot mounted with Class F Insulation, conforming to IS 325.C) MS fabricated common base plate , coupling, coupling gaurd, foundation bolt etc as required D) Suitable cement concrete foundation duly plastered with anti vibration pad etc E) 2280 LPM at 56 M head |
| 44 | SITC of Electric Driven Pressurization Pump suitable for automatic operation and consisting of following, complete in all respect, as required (Jockey Pump)A) Horizontal Type Multistage Centrifugal pump of cast iron body and bronze impeller with stainless steel shaft mechanical seal conforming to IS 1520.B) Suitable HP Squirrel Cage Induction Motor, TEFC, Synchronus Speed 1500 RPM,Suitable for operation on 415V 3 Phase 50Hz AC Supply with IP55 Protection for enclosure, horizontal foot mounted with Class F Insulation, conforming to IS 325.C) MS fabricated common base plate , coupling, coupling gaurd, foundation bolt etc as required D) Suitable cement concrete foundation duly plastered with anti vibration pad etc E) 180 LPM at 56 M head |
| 45 | SITC of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respect, as required (Diesel Driven Pump)A) Horizontal Type Multistage Centrifugal Split Casing, Pump of cast iron body and bronze impeller with stainless steel shaft mechanbical seal conforming to IS 1520.B) Suitable HP ,1500 RPM water cooled with Radiator, Diesel Engine Conforming to releavent IS standard complete with auto starting mechanism, 12/24 volt electric starting equipment, diesel tank, exhaust pipe extended upto 10M outside pump house duly insulated with 50mm thick glass wool with 1.0 mm thick aluminium sheet cladding, Residential Silencer, instrument and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office RED color etc as required.C) MS fabricated common base plate , coupling, coupling gaurd, foundation bolt etc as required D) Suitable cement concrete foundation duly plastered with anti vibration pad etc E) 2280 LPM at 56 M head |
| 46 | Suitable Rating Control Panel with all necessary provision as per releavent standard/IS code, as per detailled specification attached in NIT/Tender Doc. |
| 47 | Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. |
| 48 | Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. |
| 49 | Providing and Fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceilling etc with proper clamps, hangers, cleats, anchor fasteners etc complete in all respect as directed by Engineer-In -Charge. |
| 50 | Electrical Works |
| 51 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade of following sizes. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 52 | 25 sq. mm 3.5 core |
| 53 | 70 sq. mm 3.5 core |
| 54 | 95 sq. mm 3.5 core |
| 55 | Supply and making end termination with brass compression gland and aluminium lug for following size PVC/XLPE aluminium conductor cable of 1.1 KV grade, as required |
| 56 | 25 sq. mm 3.5 core |
| 57 | 70 sq. mm 3.5 core |
| 58 | 95 sq. mm 3.5 core |
| 59 | Earthing With GI earth plate 600mm x 600mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2,7 meter long etc, with charcoal/coke and salt as required. |
| 60 | Providing and fixing 25 x 5 mm GI Strip on surface or in recess for connection etc as required. |
| 61 | Supplying and Installing following sizes of Perforated pre-painted MS cable tray with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceilling with MS suspenders including bolts & nuts, painting suspender etc as required.150mm width x 50mm depth x 1.6mm thickness |
| 62 | FAS Works |
| 63 | Supplying, installation, testing & commissioning of main control and indicating panel made out of 16SWG MS sheet to accommodate the following items duly power coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.10 zone panel for fire alrm system250 watt amplifier racks suitable vfor operation on 230 volt AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2Nos (one to act as standby)Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24V DC supply conforming to IEC 268 for simplex mode of operation /communication suitable for 20Nos talk back unit-1 setAnnouncement control desk suitable for selection of different zones sewlectively and ON All Call switch with visual indication etc. complete as required -1 setAmplifier changeover switch for inter changing amplifier- 1 noMonitor panel for loud speeker complete with output selector, ON/OFF switch, fuse, visual indications etc, complete as required-1 NoGeoseneck microphone with stand and ON/OFF switch-1 no, Main ON/OFF switch, fuse indiaction lamps, DC and AC voltmeters and ammeters, terminal blocks etc, complete as required- 1 setBattery charger trickles cum boost to take complete load of fire alrm & PA system complete with all accessories including providing & fixing of 2 nos 12 volts, 60AH each sealed maintenance free batteries- 1 set |
| 64 | Supplying, installation, testing & commissioning of sector panel suitable for 4 Zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete as required.( With 12V7ah sealed maintenance free Battery) (ASES/System Sensor/NSD)/Apollo/Equipment) |
| 65 | Supplying, installation, testing & commissioning of Smoke Detector with bulitin LED and mounting base complete with all connections etc as required.(ASES/System Sensor/NSD)/Apollo/Equipment) |
| 66 | Supplying, installation, testing & commissioning of Heat Detector operating at 54c/57c with rate of rise cum fixed temperature (dual thermistor) with mounting base complete with all connections etc as required.(ASES/System Sensor/NSD)/Apollo/Equipment) |
| 67 | Supplying, installation, testing & commissioning of response indicator on surface/ recessed MS box having two LED, metallic cover complete with all connections etc as required.(ASES/System Sensor/NSD)/Apollo/Equipment) |
| 68 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc as required.(ASES/System Sensor/NSD)/Apollo/Equipment) |
| 69 | Supplying, installation, testing & commissioning of fire alarm sounder with facility to make announcement, mounted in MS box (16SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc complete as required.(ASES/System Sensor/NSD)/Apollo/Equipment) |
| 70 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable 600/1000 V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 71 | Supplying and fixing of 20 mm dia steel conduit along with accessories in surface/recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. |
| 72 | Supplying and Drawing 2 X 1.5 sqmm FRLS PVC insulated copper conductor, single core cable in the existing steel conduit. |
| 73 | GST |
AI Tender Summary
Tender Timeline
Jan 20, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 10, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender