|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan (including getting out and disposal of excavated earth lead upto 50 mtr and and lift upto 1.5 m, in all kind of soil complete all as specified and as directed. |
| 2 | Surface excavation n exc 30cm deep and averaging 15 cm deep & getting out in soft/ loose Soil complete all as specified and as directed. |
| 3 | Rolling and consolidating formation surfaces in cuttingonly with power roller 8-12 ton including filling in hollows and depression which occur during the process of of rolling complete all as specified and as directed. |
| 4 | M&L for Approved earth filling with approved soil brought from out side MD land, filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering etc complete all as specified and as directed. |
| 5 | M&L for 200mm thick Soling (or sub base) with broken boulders or quarried stone interstics filled, surface formed and rolled & consolidated with 8 to 10 ton power roller to required gradient & camber complete all as specified and as directed. |
| 6 | M&L for 150 mm thick complete laid in two separate layer7.5 cm thick (compacted thickness) (granite, trap or basalt)WBM,with coarse aggregates of grading 2 (63mm to 40mm size) or of grading 3 (50mm to 20mm size), spread,rolled and consolidated to gradient and camber required complete all as specified and as directed. |
| 7 | Removing excavated soil exc. 50m depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 8 | M&L preparing unsurfaced water bound macadamsurfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc, applying evenly tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen of Grade VG-10 complete all as specified and as directed. |
| 9 | M&L for 50mm consolidated thickness (compacted) Premix Bituminous Macadam with 4% binder content (Paving bitumin of Grade VG-30) by weight of total mix prepared in hot mix plant, laying or mixed with self propelled mechanical paver, duly rolled and compacted to required chamber and gradient with 8 to 12 tonne power roller and vibrating roller etc complete all as specified and as directed. |
| 10 | M&L preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc, applying evenly priming coat with bituminous primer at 5 kg per 10 sqmusing paving bitumen (VG-10) complete all as specified and as directed. |
| 11 | M&L for laying Bituminous premix asphaltic dense concrete 30 mm consolidated thickness with 5.50% binder content by weight to total mix using VG 30 paving bitumin by Mechanised paver rolled and compacted to required chamber and gradient complete & rolling to a smooth surface with 8 to 12 tonne power roller complete all as specified and as directed. |
| 12 | M&L precast cement concrete 1:2:4, type B-1, in kerb stone set in cement mortar 1:6 complete all as specified and as directed. |
| 13 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed. |
| 14 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed. |
| 15 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 16 | M&L for painting over new concerte surfaces of any description over 10cm girth or width not other wise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. |
