|
| 1 | Excavation in post holes (or similar holes) each not exc. 0.50 cum, in soft and loosesoil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed. |
| 2 | PCC 1:3:6 (nominal mix) type C-2(using 40mm graded crushed stone aggregates) as in foundation filling and mass concretecomplete all as specified and directed. |
| 3 | Mild steel work as in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work comforming to Fe-290 Gde E-165 complete as as specified. |
| 4 | Mild steel screw bolts (machine made) withhexagonal or square heads at one end andscrewed the other, or screwed both ends, eachscrewed end to be fitted with washers and onehexagonal or square nut, not exc 5cm long, diameter of neck 11 to 15mm, complete all as specified. |
| 5 | Supply Only Chain link MS galvanised fencing, not less than 4mm dia, (mesh size 75x75mm), complete all as specified. |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire ,all as specified. |
| 7 | Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165)complete all as specified and as directed. |
| 8 | Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs (weighing 97 grams to 107 grams per Running Metre) at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), ,all as specified. |
| 9 | Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise describedand applying two coats of black japan paint, complete all as specified and directed. |
| 10 | Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise describedand applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 11 | Preparation of new steel surfaces of any description, not exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
