|
| 1 | Supply and fixing of 11/0.4 KV 63 KVA Transformer conventional immersed naturally cooled distribution transformer confirming IS 2020/1993 and with amenden there of UPPCL specification with all standard fitting, Including first filling of oil complete in all respect of make approved DVVNL/UPPCL(Stock Issue Date 2023-24) |
| 2 | Supply and erection of double pole structure with 2 Nos 11.00 Mtr long steel tublar poles 410 SP 55 in 1:3:6 C.C. including 2 Nos channel cross arm of 100mmx40mm one Nos channel cross arm of ladder stand of 65mmx65mmx5mm angle iron dropped and brasing etc Analysis Attached |
| 3 | Supply and laying of 120 Sq.mm 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.Electrical SOR-2018 SI No 506 (f) |
| 4 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Electrical 35x3.5sqmm SOR-2018 SI No 501 (k) |
| 5 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects.Electrical SOR-2018 SI No 627 dog/rebit/racune/beasel |
| 6 | Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect.Electrical SOR-2018 SI No 628 |
| 7 | Supply and erection of 11 KV d.o fuseset (Fuse) on pole complete in all respect as per direction of E/inchargeSanctioned Rate. |
| 8 | Supply and Erection of 11 KV LA Set of 3 Nos Suitable for mountingSanctioned Rate |
| 9 | Supply and Erection of 11 KVTPMO set Sanctioned Rate |
| 10 | Supply and Fixing of Danger Board 11 KNSanctioned Rate |
| 11 | S/f 11 m Long pole designeted 410 SP-55 Including base plate in 1:3:6 C.C Foundation excavation 1/6 of pole length below G.L and plinth 30 cm above G.L around the pole 20 cm thick and back filling etc. complete in all respect as per direction of E/I. |
| 12 | S/f of 11 KV Pin insulator with G.I Bolt/handle nut etc.complete in all respect. |
| 13 | S/F of 11 KV Disc fitting including gun fitting on cross arm/clamp fixed on pole complete in all respect. |
| 14 | Supply and fixing of Copper \"L\" 50x60 mm for T/F Connection complete in all respect as per direction of E/Ich. |
| 15 | Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.Electrical SOR-2018 SI No 630 |
| 16 | Supply & erection of hexagonal / cradle type gaused of G.I. wire no. 8 to 4 SWG including binding etc. complete in all respect. Electrical SOR-2018 SI No 629 |
| 17 | Supplying and fixing of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel tron and complete with 50 mm X 6mm M.S flat iron clamps, bolts and nuts including drilling holes for insulator pms, bolts, nuts and washers ete (as per drawing) and painting with primer and finish pamt as required (Lucknow Rate) |
| 18 | Supply and fixing of 50mmx8mm NS flate iron pole top Bracket arm for(Lucknow Rate) |
| 19 | Supplying and fixing of channel iron 75 mm X 40 mm X 6 mm (7 14 kg permetre) \"V\" shape cross arm for two 11 KV over head line conductors complete with 50 mm 6mm M.S. flat tron clamps bolts and nats including drilling holes for insulator pms, bolts.nuts and washers ete (as per drawings and painting with primer finish paint as required (Lucknow Rate) |
| 20 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. Electrical SOR-2018 SI No 634 |
| 21 | Supply and burrying of earth rod 20 mm dia 2.5 mt long including Gl wire 7/16 SWG to connected earth rod and earth clamp on pole.3 mt long steel conduit to carry earth wire along the pole compite as per approved of Elc.(Lucknow Rate) |
| 22 | Supply and burrying of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified Electrical SOR-2018 SI No 725(A). |
| 23 | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. Electrical SOR-2018 SI No 703 |
| 24 | Supply and Laying of 80 mm dia G.I. pipe for the purpose of cable on the rus pole through this G. 1. pipe from level as cable carrier pipe should be tied with 2Nos. 50x6mm flat iron clamp with pole as per direction of E/I(Lucknow Rate) |
| 25 | Supply and erection of Four pole structure with 4 Nos 11.00 Mtr long steel tublar poles 410 SP 55 in 1:3:6 C.C. including 4 Nos channel cross arm of 75mmx40mm 4 Nos channel cross arm of ladder stand of 65mmx65mmx5mm angle iron dropped and brasing etc Analysis Attached |
