|
| 1 | Excavation in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mosed with earth around/PCC, in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50M and making good surface and getting out hsoft /loose soilsoil, complete all as specified and directed. |
| 2 | M&L for Cutting opening in cement concrete walls/columns (any description inculding reinforcement) for door, window and othere openings (with or without reveals) or enlarging existing openings including trimming surfaces t receive rendering, etc. |
| 3 | M&L Plain cement concrete (1:2:4) type B-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified. |
| 4 | S&F steel work in tubular (square/rectangle/round) including special shaped wahser etc complte using ERW or induction butt welded tybes conforming to IS 1161-1979St grade St-240. |
| 5 | S&F Rolled mild steel framed work as in door, Gates of angle or other section with gussed plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides and hanging also fastening and fixing complete Gde Fe 410-W Gde E-250 quality -A complete all as specified and as directed. |
| 6 | S&F Mild steel work as in bands, straps, clamp, wall ties conforming to Fe 290 Gde F-165complete all as specified and as directed. |
| 7 | Supply & Fixingfor Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, ficed with self tapping screws as specified as in ridges all as specified and directed. |
| 8 | Material and labour applying two coats of synthetic enamel paints over one coat of red oxide primer on steel surfaces n exe 10cm in width or girth including preparation of surfaces complete all as specified. |
| 9 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc rich anti corrosive primer complete all as specified and as directed by the Engr-in-Charge. |
| 10 | Excavation in trenches n.exc 1.5m wide andn.exc1.5m deep getting out as in hard/dense soil complete all as specified |
| 11 | M&L Sand filling under floors or in foundation including watering and consolidation complete. |
| 12 | M&L PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and as directed. |
| 13 | M&L brickwork with Fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:4 complete as directed. |
| 14 | M&L RCC 1:1.5:3 nominal mix (20mm graded stone aggregate) as in foundation, incl rafts footing foundations beams, plinth beam & mass concrete complete all as specified and as directed. |
| 15 | M&L RCC1:1.5:3 nominal mix (20mm graded stone aggregate) as in Column pillar, posts & struts complete all as specified and as directed. |
| 16 | M&L RCC1:1.5:3 Nominal mix (20mm graded stone aggregate) as in slab slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed. |
| 17 | M&L RCC 1:1.5:3 nominal mix (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50M span complete all as specified and as directed. |
| 18 | Formwork to side of concrete foundation footing bases of columns, raft and raft beams,sides and soffits (if any) of foundation & plinth beams and similar work vertical or better comolete all as specified and as directed. |
| 19 | Formwork for side of pillars, posts, struts & column similar work vertical or better complete all as specified and as directed. |
| 20 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. complete all as specified and as directed. |
| 21 | Formwork to sides of concrete as in lintel beams, and similar work for rough finished flat surfaces. |
| 22 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to deformed or twisted bars. |
| 23 | M & L for mild steel TMT bars any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed |
| 24 | M&L Hardcore or gauge not exceeding 63mm of broken stone deposited spread levelled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 25 | Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed by the Engr-in-Charge. |
| 26 | Material and labour forGlazed ceramic tilesof size 450x300x7-8mm thick in verticle surfaces set andjointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge. |
| 27 | M&L PCC (1:3:6) 75 mm as in plinth protection and making even and smooth with using extra cement |
| 28 | M&L for15 mm thick rendering in CM (1:4) on fair faces of concrete surfaces finished even & smooth without using extra cement. |
| 29 | M&L rendering 15 mm thick in CM (1:6) on internal surfaces of walls of block masonry finished even & smooth without using extra cement. |
| 30 | M&L for preparation of newly plastered wall surfaces and applying two coats of Weather proof coat exterior emulsionall as specified. |
| 31 | M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer all as specified. |
| 32 | S&F in position solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and all as per manufacturer\"s instructions. |
| 33 | S&F in position 30mm thick factory made solid panel PVC door shutter (conforming to IS : 4020) consisting of frame made out of MS tube of 19 gauge thickness and size of19mm x 19mm for stiles, 15mm x 15mm for top & bottom rails.MS frame shall be covered with 5mm thick heat moulded PVC \"C\" channel of size 30 x 50mm forming stiles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side and all as per manufacturers instructions. |
| 34 | Anodised aluminium frame for windows, ventilators with one or more rebate including jointing cleats for fixing etc complete all as specified. |
| 35 | Anodised aluminium window and ventilator shutters sliding type with out shus, aluminium section weighing 0.55 kgs/m including necessary joining cleats ,glazing clips, rubber packingwith locking system anodised aluminium snap beading screws all as spd |
| 36 | S&F stainless steel Butt hinges medium weight cold rolled 100mm long. |
| 37 | S&F extruded aluminium alloy handle fabricated type anodised 100mm long. |
| 38 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long. |
| 39 | S&F rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 500 Litre capacity all as specified in SSR and as directed including taking down old one. |
| 40 | S&F 15mm dia bib taps bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs. |
| 41 | S&F in repairs stop valves cast copper alloy chromium plated fancy type screwed down high pressurescrewed both ends for pipe or union fixed for 15mm bore. |
| 42 | S&Fvitreous chinawash down water closet pan (Pedestal pattern ) white(excluding fixing bolts,flushing cistern and flush pipe )with P or S trap with plastic closet seat ,black,closed pattern with flat bottiom and cover and mild steel chromium plated complete all as specified. |
| 43 | S & Fin repairs 10 litres capacity PVC valveless, syphonic action type,flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed by Engineer-in-charge.. |
| 44 | S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D\" type completewith brass chromium plated screw complete all as specified and directed. |
| 45 | S&F GI Tubing 15mm bore of medium grade with all fittings and fixed complete to grounds / walls and ceiling or laid in floors all as directed. |
| 46 | S&F GI Tubing 20mm bore of medium grade with all fittings and fixed complete to grounds/ walls and ceiling or laid in floors all as directed. |
| 47 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood fixed to wooden plugs with chromium plate brass screws and cup washers all as specified and directed. |
| 48 | S&Fvitreous china wash basin, white flat back of size 550mm x400mm, excluding tap incl bracket complete all as specified and as directed. |
| 49 | S&F Pillar taps, cast copper alloy chromium plated fancy type, screwed down, high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nut of 15mm bore. |
| 50 | S&F 32mm dia waste fitting brass CP for glazed ware WHB with long screw shanks & fly nuts. |
| 51 | Cutting into exising manholes for 100 mm dia of pipe connecting new drains,making good to pipe and rendering cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished,and reforming benching as required. |
| 52 | S&F PVC (SWR) pipes of 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floor metres including necessary scaffolding. |
| 53 | S&F PVC bends 110mm bore with access door complete all as specified and as directed. |
| 54 | Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm deep as in soil complete all as specified. |
| 55 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point as in soil complete as specified. |
| 56 | S&F chromium plated shower roses withswivel joints, 125mm size including fixing to steel pipe or union all as specified and directed |
| 57 | Material and labour for fabrication of MS angle iron post or posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified andas directed by the Eng-in-Charge. |
| 58 | Supply of chain link MS galvanised fencing any size or type, complete all as specifie and directed. |
| 59 | Fixing only chain link fencing icluding line wires any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire, all as specified and directed. |
| 60 | S&F for galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins as directed (each line wire to be measured). |
| 61 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc. 5 cm long, all as specified and directed. |
| 62 | S&F of round bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not lesses than 0.90mm dia or securing with clips quality conforming, all as specified and directed. |
| 63 | Supply & Fixingin repair stainless steel concerntina coil fencing with punched tape concerntina coil 600mm dia 10 mtr openable length (total length 90mtr), having 50 nos round per 6 mtr length upto 3 mtr heigth of wall with 9 horrizsontal RBT reinforced barbed wire, stud tied with GI satples and GI clips to retain horrizontal, including nessesary bolts or GI barbed wire tied with angle iron complete all as specified and as directed |
| 64 | Supply & Fixingfor 10mm thick polycarbonate multiwall sheet as in roof with UV coated fixed with MS flats top and bottom rubber gasket and screws 25mm long all as specified and directed . |
| 65 | M&L for Concealed point wiring with 1.5 sqmm PVC insulated FRLSH sheathed 1100 Volts grade copper multi stranded conductor drawn through and including rigid PVC conduit 20 mm dia concealed in walls ,roofs, etc including 1.5 sqmm PVC insulated copper conductor as earth continuity conductor and other accesories such as metal box, sheet cover, screws,nuts etc connecting it to the common earth dolly all as specified for one light/ceiling fan/Exhaust fan / wall fan each controller by one way switch |
| 66 | Supply and fix LED batten 20 Watt extruded aluminium housing,high power diffuser, slim and integrated design, lumen not less than 2100 lumen polycarbonate, energy efficient fixed to wall/ ceilling and connecting upto ceilling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed. |
| 67 | Supply and fix LED batten 10 Watt extruded aluminium housing,high power diffuser, slim and integrated design, lumen not less than 2100 lumen polycarbonate, energy efficient fixed to wall/ ceilling and connecting upto ceilling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed. |
| 68 | M & L Switch Modular type single pole, one way 6 Amp complete all as specified and as directed. |
| 69 | S & F Modular White cover plate with frame 3 M incl taking down old one. |
| 70 | S & F Metal flush box 3 module incl taking down old onecomplete all as specified and as directed. |
| 71 | S & F ceiling rose 3 terminal PVC/polycarbonate isolated body type complete all as specified and as directed. |
| 72 | Supply and fixing SPN 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 73 | Supply and fix 2 way SPN Single door DB without bus bar complete all as specified and as directed. |
| 74 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm nominal cross section in service connections complete all as specified and as directed. |
| 75 | Supply, Laying of Tubes, \"light grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 76 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
