Tender For Construction Of Ramps Lifts, Tactile Flooring, Disability Friendly Toilets, Disability Access Handrail At Court Complex At Payal, District Ludhiana.
Tender Value
41.59 Lakhs
Estimated cost
Bid Submission
28 Jan 2025
0 days left
EMD
83181
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
payal → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Ramps Lifts, Tactile Flooring, Disability Friendly Toilets, Disability Access Handrail At Court Complex At Payal, District Ludhiana.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work Dismantling concrete |
| 2 | Dismantling brick work tile, masonry or tile lining |
| 3 | Dismantling of glazed tile (to be carefully removed |
| 4 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. |
| 5 | Cement concrete 1:4:8 with 40 mm gauge mixing by mechanical means using concrete mixer volumetrictype |
| 6 | Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 7 | Reinforced cement concrete M-25mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. |
| 8 | Cold twisted detormed (Ribbed/ Tor steel) Bars(Fe 500 grade as per IS 1786-2008) , for R.C.Cworks, where not including in the complete rate ofRCC including bending and binding placing inposition complete |
| 9 | Centring and shuttering for columns (Square or rectangular or poly gonal in plain)+ smooth exposed concrete finish |
| 10 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. + smooth exposed concrete finish |
| 11 | 20 mm thick cement plaster 1:4. |
| 12 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish |
| 13 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats) |
| 14 | Finishing walls with Premium Acrylic smooth exterior paintwith silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm |
| 15 | Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability) |
| 16 | Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings |
| 17 | Provoiding and laying four courses of water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown type bitumen grade 85/25 applied hot at 1.20kg.per sqm of area for each course second course on roofing felt type 3 grade-1(hession base self finished bitumen felt) and four than final course of stone grit 6mm and down size or peasizes grit spread at 0.006cum per sqm including preparation of surface complete. |
| 18 | Terracing consiting of tile 22.86*11.43*3.83cm laid over 25mm mud plaster 7.5cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65kg/sqm top of R.C.C slab including grouting with cement sand mortar 1:4 and top surface to be clean after wire brushing. |
| 19 | Wrought iron & Mild steel ladders, framed grills,gratings etc. with ends of bars riveted or moldedforged framed window guards, barred iron doorsstair case iron railing etc. including cost of boltsand nuts, screws, welding rod complete fixing inposition |
| 20 | providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation metre or as desired by engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws with EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a seal complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. |
| 21 | Top khurra 0.6m x 0.6 for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick CC 1:8:16. |
| 22 | Cement concrete 1:2:4 gola 10cm x 10cm concave quardant along junction of roofs with parapet wallfinihed smooth,specially specified. |
| 23 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 |
| 24 | Providing and fixing cast iron 100mm dia rain water pipe with screw and wooden plugs fixed and wall face including filling joints with spun yarn and cement mortar 1:2 excluding head and shoes etc. |
| 25 | Painting two more coats excluding priming coat with synthetic enamel paint in all shades on wood work metallic or plastered,concrete surface to give an even shade |
| 26 | Providing and fixing name plates of various size made of pvc sheet printing with self adhesive tape pasted on sunboard complete as desired by Engineer in charge |
| 27 | Providing supplying and fixing of Disability friendly Braille Script embosing on 4 mm thk. Acrylic sheet as per requirement of site complete in all respects as directed by Engineer in charge |
| 28 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 29 | Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge |
| 30 | Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 31 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 32 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sandedl |
| 33 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 34 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. + Extra for smooth exposed concrete finish |
| 35 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 36 | First class burnt brick work laid in cement sand mortar 1:5 in first story upto 4 meter above plinth level |
| 37 | 20 mm Thick cement plaster 1:4 on wall Two coats |
| 38 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 39 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 40 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 41 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material |
| 42 | Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material. |
| 43 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 44 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 45 | Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 46 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : - For fixed portion and chawkhats |
| 47 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 48 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. |
| 49 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :- 300mm x 16mm |
| 50 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. |
| 51 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing. |
| 52 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4 kgf / cm²) conforming to IS:4985, including fixing with MS clamps.U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia. |
| 53 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.110 mm dia bend |
| 54 | Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. |
| 55 | Providing and fixing in position gratings 150mm x 150mm on top Khura PVC grating |
| 56 | Public HealthCement concrete 1:4:8 With stone aggregates 40mm gauge mixing by manual means |
| 57 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggrigate 40 mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material |
| 58 | Screed of 50mmthick cement concrete 1:8:16 with stone aggregate to be laid below the topping using mechanical mixer for mixing of material |
| 59 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble saltPrint Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).Size 600x600 mm |
| 60 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 61 | Earth work upto 1.5 m. Depth All classes of soil except rocky |
| 62 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.SDR 11 CPVC pipes & fittings 20mm o/d |
| 63 | CPVC SDR 11 Pipe & fitting 32mm o/d |
| 64 | EXTERNAL IN THE GROUND : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, & testing of joints excluding cost of excavation complete as per direction of Engineer-in-Charge.CPVC SDR 11 pipe & fittings 20mm o/d |
| 65 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.20mm i/d Brass Ball valves |
| 66 | 32mm i/d Brass Ball valves (Down pipe) |
| 67 | Making connection with the existing G.I. branchmainupto40mmsizepipeincluding cutting ofexisting pipe line, threading ofpipe lines from both ends and fixing of G.I Tee etc. inthepipeline(includingcostofG.ITee) complete in all respects. |
| 68 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. Through wall 22.86 cm thick |
| 69 | Excavation manually in trenches with straight or open cutting in a builtup street/Lanes having wall to wall width upto 3 meter for sewer and manholes to full depth as shown in drawings including shoring, dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning roads, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of works upto 15 mtr., for all works other than connections to complete in all respects.For depth not exceeding 2 m. below Ground level. All classes of soil except rocky |
| 70 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal |
| 71 | Disilting of manhole including all safety measures, cost of container T & P and disposal of silt upto 5km complete in all respects.Depth upto 3 m. |
| 72 | Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching cistern, one pair mounting brackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.Providing and fixing jet spray with 2\"-6\" long PVC pipe. With C.P. Brass nut |
| 73 | With C.P. Brass nut |
| 74 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of theEngineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 75 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 76 | Providing and fixing partition for different type of urinals.19 to 20 mm thick Granite stone partition size 375mm x 750mm |
| 77 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 78 | Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) |
| 79 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. C.P. brass toilet paper holder |
| 80 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 81 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)Size 550mmx400mm |
| 82 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 83 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge)with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long |
| 84 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 85 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge)complete in all respect.C.P. brass Bib cock foam flow without flange |
| 86 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.C.P.brass 15mm Concealed stop cock with flange. |
| 87 | C.P.brass 15mm Angle valve without flange |
| 88 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect.PVC tube connection of size 15 mm x 450 mm with Brass nut |
| 89 | Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect C.P. copper tube connection of size 15 mm x 600 mm with C.P. Brass nut |
| 90 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type B110mm o/d SWR UPVC pipe lines laid complete |
| 91 | 90mm o/d SWR UPVC pipe lines laid complete |
| 92 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)110mm o/d |
| 93 | 90mm i/d |
| 94 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 95 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.For 110mm o/d pipesDoor Cap |
| 96 | Single Tee With Door |
| 97 | Door Elbow 90 Degree (All side socketed) |
| 98 | Elbow 90 Degree (All side socketed) |
| 99 | Vent Cowls |
| 100 | Coupler |
| 101 | P Trap/Floor Trap 110mm x 75mm |
| 102 | Single Y-Junction |
| 103 | For 90mm o/d pipesDoor Cap |
| 104 | Single Tee With Door |
| 105 | Door Elbow 90 Degree (All side socketed) |
| 106 | Elbow 90 Degree (All side socketed) |
| 107 | Vent Cowls |
| 108 | Coupler |
| 109 | Single Y-Junction |
| 110 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75 mm x 75 mm |
| 111 | Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball20 mm i/d |
| 112 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.Double Layer Tanks |
| 113 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 114 | De-Silting and Cleaning of Sewer lines using Super Suction machine and taking out of debris/silt etc. including safe disposal of silt with in municipals limit as directed by EIC.8\" i/d Sewer Line |
| 115 | Providing & Fixing 20 mm i/d Flush Cock complete in all respect. |
| 116 | Construction of platform for placing 1000 Litre PVC water storage tank complete in all respects. |
| 117 | Electrical WorksRECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point)and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring light point |
| 118 | Wiring light point without control switch. |
| 119 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (Un-sheathed) |
| 120 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materialsetc., as per PWD General Specifications:-Medium Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 121 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 122 | Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.:-Plastic Surface Box for Modular Accessories One/Two Module |
| 123 | Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and shortcircuit current fault suitable for 240/ 415 volts 50cycles AC supplywith breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, truecontact indication, label holder facility in the existing MCB distribution board as per PWDGeneralSpecificationsincluding connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 124 | Supply and erection of LED Batten 20watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with extruded aluminium housing with control gear (IP 20 protection), THD<10%, CRI minimum 70,Low power LED with wattage Less 1 Watt, Surge Protection 2.5KV and above as per IS/ IEC Standards, efficacy of LED fixture minimum 100 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon\"ble Technical Advisor to Punjab Govt. vide LetterION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 125 | Supply and erection of Heavy duty Exhust Fans 300mm sweep 900RPM complete with Louver shutter (Make:Canon or equivalent) of double ball bearinglonger life including flexible wire & petty material etc. for connections and testing completein all respect as approved and desired by the Engineer in-charges at site. |
AI Tender Summary
Tender Timeline
Jan 15, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 29, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender