Tender For The Work Of Restoration, Reconstruction And New Construction Of Damaged Bridges And Other Pucca Works Of Ghatampur Canal Under Kanpur Block Lower Ganga Canal. - Restoration, Reconstruction And New Construction Work Of Damaged Bridge-Culvert And, ghatampur-Uttar Pradesh

Tender for the work of restoration, reconstruction and new construction of damaged bridges and other pucca works of Ghatampur canal under Kanpur block Lower Ganga Canal. - Restoration, reconstruction and new construction work of damaged bridge-culvert and other concrete works of Ghatampur Rajwaha under Kanpur Block Lower Ganga Canal, Kanpur. Sl. No. Item Description 1 Earthworkin embankment/road diversion including lift upto 1.50 m. and lead upto 30 m. and including filling, watering and ramming of excavatedearth asdirectedbytheEngineer - in - charge. 2 Earth work in foundation in dry ordinary soil (Loam, clay or sand) including lift upto 1.50 m. and lead upto 30 m. and including filling, watering and ramming of excavatedearthintothetrenchesorintothespace betweenthestructureandthesidesoffoundation trenches or into the plinth with removal and disposal ofsurplusearthasdirectedbytheEngineer-in- chargeupto adistance of 30 m. from the foundation trenches. 3 Providing & laying Cement Concrete (M10) 1:3:6 (1 cement :3 coarse sand : 6 Aggregate) in foundation with cement coarse sand and stone grit 20-40mm gauge including proper curing and compaction including cost of all material, Labor T&P etc required for proper completion of Work as per ID specification & as per direction of Engineer in Charge. 4 1st class Brick (M150) work 1:4 Cement Mortar including Labor T&P etc complete workas per ID specification & directionsas per Engineer-in-charge. 5 Cenetering & shuttering for Reinforced Cement Concrete work up to 3.00 m Span including cost of shuttering, material, Labour, T&P etc required for proper completion of workas per ID specification & directionsas per Engineer-in-charge. 6 Cenetering & shuttering for Reinforced Cement Concrete work above 3.00 m Span including cost of shuttering, material, Labour, T&P etc required for proper completion of workas per ID specification & directionsas per Engineer-in -charge. 7 Providing & laying Reinforced Cement Concrete (M20) 1:1.5:3 (1 cement :1.5 coarse sand : 3 Aggregate) with cement coarse sand and stone grit 20mm gauge including proper curing and compaction including cost of all material, Labor T&P etc required for proper completion of Work as per ID specification & as per direction of Engineer in Charge. 8 Providing andLayingSteel reinforcement including cutting, bending, binding & placing in position including cost of all material, Labor T&P etc required for proper completion of Work as per ID specification & as per direction of Engineer in Charge. 9 Providing & laying wearing coat with Cement Concrete (M20) 1:1:2 (1 cement :1 coarse sand : 2 Aggregate) with cement coarse sand and stone grit 20mm gauge including proper curing and compaction including cost of all material, Labor T&P etc required for proper completion of Work as per ID specification & as per direction of Engineer in Charge. 10 12 mm cement plaster of mix (in coarse sand)1:4 (1 cement: 4 coarse sand)on brick Masonary including cost of all material, Labor T&P etc required for proper completion of Work as per ID specification & as per direction of Engineer in Charge. 11 Brick on edge floor with class 150 brick laid dry joint sand fill including prepration of base to proper slopes and its ramming including all labor and T&P etc. 12 Supply and Fixing of75 mm dia PVC pipe with cost of all material, labor and T&Prequried for proper completion of work 13 Distempering (first coat) with oil bond distemper of approved brand and manufacturer and of required shade on undercoated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacturer such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of materials. 14 Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60 m asper direction of Engineer-in-charge. 15 Supply of spindle of rod 50 mm dia, total length of a rod = 2.00 R.M. charge. 16 Supply of C.I.Housing Nut & Handle 17 Supply of Gunmetal Bush 18 Supply of Thrust Bearing 19 Replacing of Musical Note type side rubber seal as per IS code 11855 by removing old/damaged rubber seal from gate, scraping & cleaning surface, making holes, fixing clamping the M.S.Plate by new counters sunk head high tensile boards, nut & vase making adjustment as per requirment of site including cost of all labor material &T&P for proper completion of work. 20 Painting on old rusted steel surface of gates & appurtenances after prepration of surface properly by sand Blasting process and applyng 2 coat of jinc rich primer and 2 coat of solventless epoxy paint including all labor material &T&P etc for proper completion of work. 21 Fixing of Gate in proper position

INR 2715 /-

INR 1808000.0 /-

INR 9.04 Crore /-