Tender For Construction Of Internal Road Annabhau Sathe Nagar At Sulkud Tal Kagal Dist Kolhapur Yojana Anusuchit Jati And Navbodhh Ghatkancha Vikas 2024 2025
Tender Value
14.99 Lakhs
Estimated cost
Bid Submission
20 Jan 2025
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kagal → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Internal Road Annabhau Sathe Nagar At Sulkud Tal Kagal Dist Kolhapur Yojana Anusuchit Jati And Navbodhh Ghatkancha Vikas 2024 2025
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. By Mechanical Means.Item / Page No : 11 / 23Specification No : MORTH-301Spec. Page No : 45-53 |
| 2 | Supplying trap metal of required size by bringing the boulders / rubble at the road side breaking them to required gradation including conveying the boulders / rubble and stacking the broken metal, excetra complete. (Prior approval of sample stack of broken metal by the Executive Engineer is necessary. The date of approval will form part of the measurements) - 60 milimetre metal, by breaking boulders. (Hand broken).Item / Page No : 56A / 346Additional Specifications : 1. Work shall be carried out as per the instructions of Engineer In-Charge.2. Prior approval of sample stack of broken metal by the Executive Engineer is necessary. The date of approval will form part of the measurements. |
| 3 | Supplying trap metal of required size by bringing the boulders / rubble at the road side breaking them to required gradation including conveying the boulders / rubble and stacking the broken metal, excetra complete. (Prior approval of sample stack of broken metal by the Executive Engineer is necessary the date of approval will form part of the measurements) - 40 milimetre metal, by breaking rubble obtained by blasting. (Hand broken).Item / Page No : 55 / 345Additional Specifications : 1. Work shall be carried out as per the instructions of Engineer In-Charge.2. Prior approval of sample stack of broken metal by the Executive Engineer is necessary. The date of approval will form part of the measurements. |
| 4 | Supplying hard murum / kankar at the road site, including conveying and stacking, excetra complete.Item / Page No : 29a / 25Specification No : MORTH-408Spec. Page No : 139-142 |
| 5 | Supplying soft murum at the road site, including conveying and stacking, excetra complete.Item / Page No : 29b / 25Specification No : MORTH-408Spec. Page No : 139-142 |
| 6 | Spreading 60 mm metal for road work including sectionong, excetra complete as directed by Engineer in charge.Item / Page No : 58A / 346Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. |
| 7 | Spreading 80 milimetre / 40 milimetre metal for road work including sectionong, excetra complete as directed by Engineer in charge.Item / Page No : 58 / 346Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. |
| 8 | Spreading hard murum gravel or kankar for side width, excetra complete.Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. |
| 9 | Spreading soft murrum gravel or kankar for side width, excetra complete.Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. |
| 10 | Compacting the sub grade/gravel/oversize metal (200 milimetre loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.Item / Page No : 59 / 346Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. |
| 11 | Compacting the sub grade / gravel / size metal (100 milimetre loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.Item / Page No : 61 / 346Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. |
| 12 | Providing and constructing 75 milimetre thick modified penetration macadam road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone metal layers 30 percent crusher broken metal plus 70 percent hand broken (by breaking rubble obtained by blasting), heating and spraying the bitumen of of specified grade at the rate of 2 kilogram per square metre, spreading 12 milimetre size chips, compacting with three wheel static roller having weight 8 to 10 metric tonnes to achive the desired degree of compaction as per technical specification Clause 506, excetra complete. Including picking of existing water bound macadam surface. (Using VG-30 bulk bitumen)Item / Page No : 35a / 31Specification No : IRC-SP-20Spec. Page No : 215 |
| 13 | Providing and Laying open graded premix surfacing of 20 milimetre thickness composed of 13.2 milimetre to 5.6 milimetre aggregates premixed with bituminous binder, transported to site with vehicle tracking system, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction, excluding prime / tack coat and seal coat. For Bitumen VG-30 bulk (Grade 60/70) - Using drum mix type hot mix plant without Supervisory Control and Data Acquisition, Paver and vibratory roller. (Over modified penetration macadam surface)Item / Page No : 12 / 36Specification No : MORTH-501,510,511,902,903,112Spec. Page No : 149-162,198-205,205-207,417-421,421-436,19-21 |
| 14 | Providing bituminous type-A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade, preparing existing road surface, heating and applying bitumen at the rate of 0.98 kilogram per square metre by mechanical means, spreading chips and rolling by static roller having weight 8 to 10 metric tonne, excetra complete.Item / Page No : 1 / 35Specification No : MORTH-511Spec. Page No : 149-162,205-207,198-205,417-421,19-21 |
| 15 | Supplyaing cement concrete pipe 450 milimetre diameter (NP3)2.5 meter long at the site of workNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. |
| 16 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20 metre X 0.90 metre size made out 18 gauge (1.25 milimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on M.S.angle of size 35 milimetre X 35 milimetre X 3 milimetre frame with properly cross braced mild steel angles of size 35 milimetre X 35 milimetre X 3 milimetre duly painted including two mild steel angle iron posts of size 65 milimetre X 65 milimetre X 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures excetraand fixing the boards in 1:4:8 concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. number As directed by Engineer in ChargeItem / Page No : 36 / 60Specification No : MoRTH-801Spec. Page No : ---Additional Specifications : The work shall be carried out as per instructions of Engineer in charge. |
| 17 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.Item / Page No : 4 / 0Additional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.2. Above / below percentage quoted by the contractor will not be applicable for this item.Sieve Analysis Test for Metal 40 milimetre and above (Hand Broken)1 Test per 100.00 Cubic Metre |
| 18 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.)Item / Page No : 3 / 0Additional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 146 Dated 04/06/2021 and Government of Maharashtra Public Works Department State Schedule of Rates 2021-22 General Note Number A(v), Page 5.2. The amount of royalty charges will be paid only after submission of the receipt in original from Revenue authority for payment of royalty to Government, stating the name of work.3. Above / below percentage quoted by the contractor will not be applicable for this item. |
| 19 | ADD INSURANCE TOWARDS LABOURNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. |
| 20 | ADD GST ON GOVERNMENTAL CONTRACT WORKNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. |
AI Tender Summary
Tender Timeline
Jan 13, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 20, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender