Power Boards / Undertakings / PSU Closing in 0 days TDR #47231275

Tender For Installation Of Additional 05 Mva Transformer At 33/11 Kv Substation Nadarganj Old Under Edd-Nadarganj And Other Associated Works” Sl. No. Item Description 1 Dragging, Loading, Carriage And Unloading Of Following Store Materials With Prop

Issued by Boards / Undertakings / PSU · Lucknow, Uttar Pradesh
Tender Value
38.86 Lakhs
Estimated cost
Bid Submission
24 Jan 2025
0 days left
EMD
38900
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

tender for Installation of Additional 05 MVA Transformer at 33/11 KV Substation Nadarganj Old Under EDD-Nadarganj and other associated works” Sl. No. Item Description 1 Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dumps store and from JE dump store to work site within municipal area. 2 33 KV VCB 800 Amp. 750 MVA 3 33 KV Control Pannel single circuit Transformer 4 33 KV Control Pannel Single Feeder 5 33KVCurrent Transformer 200/100/1 6 33KVCurrent Transformer 400/200/1 7 11 KV Incoming VCB 600/300/5A, 350 MVA 8 11 KV Out going VCB 200/100/5A, 350 MVA 9 11 KV VCB Bus coupler, 350 MVA 10 11 KV 3x300mm2 XLPE Cable 11 11 KV3x300mm2Outdoor Termination Kit 12 11 KV3x300mm2Indoor Termination Kit 13 11 KV3x185mm2 XLPE Cable 14 11 KV3x185mm2Outdoor Termination Kit 15 11 KV3x185mm2Indoor Termination Kit 16 33 KV Lightening Arrester 17 33 KVBus Isolator 18 33 KVLine Isolator 19 Battery charger 24 Volt 20 Battery set 24 Volt 21 ACSR Panther Conductor for Bus Bar 22 Copper Control Cable 2x2.5 Sq. mm. 23 Copper Control Cable 4x2.5 Sq. mm. 24 ST pole 11 mtr long 25 M.S.channel 100x50 sq mm 26 M.S.Angle 65x65x6 sq mm 27 11 kv pin insulator 28 M S Earthing Rod 20x2500 mm 29 11 kv pin with nut 30 1x240 LT XLPE Cable 31 MS Channel 125x65mm 3.5m long 4 Nos Pieces [email protected] Kg. Mtr. With wastage 32 MS Angle 75x75x6, 2.6M 2 Nos Total [email protected] Kg./M with wastage 33 MS Round of 32 mm dia for laying of main earthmat in switch yard & for panel earthing bridge [email protected] Kg./M 34 MS Round of 32mm dia for making MS earth electrode 32x3000mm. [email protected] Kg./M 35 Rail 105 lb 9 mtr long 36 Earthing of substation Switchyard. 37 Earthing of substation Switchyard complete by round bar 32 mm dia exavation of earth for laying of earth mat 750mm deep and proper leveling after laying of earth mat Complete as per specification and connecation of all switchyard equipment by GI Flat 50x6 mm (The contractor shall arrange all the material except MS Round Bar 32 MM) 38 Cutting ,fabrication and driving of earth electrode of size 32x3000 mm 39 Cutting shaping, laying and welding of riser strip size 50x6mm G.I strip of size 50x6 mm in between earth mat and equipments /structure/body of T/F for earthing (two nos Riser for each structure equipment individually GI strip shall be provided contractor ) 40 Earthing of Indoor Equipment by making of 2 Nos. Quard of round bar 32 mm dia as per norms. 41 Outdoor switch yard & aproch roadLighting 42 Switch Yard fencing with Toe wall 43 Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel). 44 Painting of all structures equipment. 45 Construction of Power T/F plinth suitable for 33/11KV 05 MVA power T/F of size 4x3x1.3 having 0.4 mtr height above ground level. The work includes excavation of foundation base concreting in cc ratio 1:6 Mas 12 1st class brick work in ratio 1:4 with coarse sand ,foundation cc in ratio 1:4:8using M.S bar of 12 mm dia for reinforcementthe work includes laying of 2 nos rail pieces 4 mtr long as per drawing/practice the plinth shall be finished in all respect. (only rail piece and M.S angle provided by the department) 46 Construction of masonry type plinth for 33KV VCB of size 1.6x1.6x1 M brick, sand, cement and stone grit including grouting of 4 Nos foundation Bolts for erection of 33KV VCB. 47 Fabrication & erection of 11 KV cable exposure type double pole with the provission ofcable with fixing of necesory clamps and other acessories like danger board,number plate,barbed wire,2 no. channels 100x50mm (1600mm each),1 no.MS channel 100x50mm(3200mm in length) for supporting the hoisting of cable & poles.its jumpering by single core PVC aluminium cable with proper size Al.lug after making three phase busbar with help of 11 KV pin,pin insulator and PVC cable. (all material arranged by contractor except steel,pole & insulator).as per RESPO norms. 48 Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting os structure complete.(only M.S channel and angle provided by the deptt) 49 Lightning Arrestor/ CT structure : - Fabrication of lightning arrestor/CT structureas per RESSPO drawing with the help of 2 nos M.S channel 125x65 mm minimum 3.5 mtr long grouting 1 mtr deep from ground level in cc in ratio 1:4:8. complete in all respect. 50 Extension of 33 kV Bus Bar Gantary complete with structure and other required work. (Except rail/angle/channel/panther conductor all required materials provided by contractor) 51 Erection of structures, grouting, plinthing of ALL structuresequipment. 52 Mounting of accessories/equipment on fabricated structure complete work with making proper alignment and tightening the work includes fabrication work if required for proper operation of equipment . 53 33 KV VCB 54 CT 200/100/1-A 55 33 KV lightning Arrestors 56 Bus/Line Isolator 57 Fabrication & Erection of Neutral Stand structure with foundation 58 Erection, commissioning and Testing of 05 MVA T/F mounting of radiator conservator tank exposure vent etc. Filling of T/F oil in radiator conservator tank with complete work as per RESPO Norms. 59 Jumpering complete T/F bay with ACSR panther Cond. and required clamp with nut & Bolts from 33KV existing bus bar to T/F & other all required work. ( Except Panther Conductor all required material provided by Contractor.) 60 Jumpering complete Line bay with ACSR panther Cond. and required clamp with nut & Bolts from 33KV existing bus bar to cable stand & other all required work. ( Except Panther Conductor all required material provided by Contractor.) 61 Laying ofDouble circuit 11 KV 3x300 sq mm XLPE cable in normal soil/allready Constructed trench/As per Site Condition by digging of suitable size of trench as per site condition cable should be covered by bricks and sand with cleaning of Existing Trench. 62 Hoisting, jumpering, clamping of 11KV 3x300 sq mm XLPE cable on cable stand, panelwith proper taping with the help of empire tape. PVC tape and connectors. 63 Hoisting of 11KV3X185 sqmm XLPE cable on double pole with MS pipe/GI pipe of size 5/6 dia 3 M longincluding its jumpering complete with clamps, nuts and bolts(all material arranged by contractor). 64 Laying of Single circuit 11 KV 3x185 sq mm XLPE cable in normal soil/already Constructed trench/As per Site Condition by digging of suitable size of trench as per site condition cable should be covered by bricks and sand with cleaning of Existing Trench. 65 Hoisting, jumpering, clamping of 11KV 3x185 sq mm XLPE cable on 11 KV panelswith proper taping with the help of empire tape. PVC tape and connectors. 66 Construction of Control cable trench of size 150 mm wide 300 mm deep with brick work along with provision trench cover M.S strip at the interval of 0.30 M and M.S angle at both the edge of the trench. 67 Construction and fixing of trench cover0.5 M wide 0.75 mm thick with cement, coarse sand & stone grit in ratio 1:2:4 for covering of cable trench150 mm wide with provision of M.S Angle as per RESPO Norms 68 Laying of copper control cable of following sizes its proper dressing ,ferruling and connection with the system as per Site Condition with cleaning of Existing Trench.( except control cable all the material shall be provided by contractor) as per norms 69 Copper Control Cable 2x2.5 Sq. mm. 70 Copper Control Cable 4x2.5 Sq. mm. 71 Pipe boring type earthing minimum 20 mtr deepfrom ground level or upto water level with B class G.I. pipe 2 dia. Connection of equipment with earthing by GI strip 50x6 mm included in the job as per specification/norms for power transformer, VCB, CT/LA and other. (All materials will be Provided by contractor) 72 PG Clamp Panther 73 Dragging of following panels (Control and feeder pannel) from unloading place upto control room and placement erection and grouting, commissioning & testing of the same as per RESPO Norms 74 33 KV T/F Control panel 75 33 KV Control Pannel Single Feeder 76 11 KVBus coupler, 350 MVA 77 11 KV Incoming VCB 600/300/5A 78 11 KV Out going VCB 200/100/5A 79 Supply of following auxiliary material 80 Rabber mat 2x1.5 Mtr. 81 Erection of 24 V batteries set with charger including stand (except 24 V batteries set with charger all the material & stand shall be provided by contractor) & initial charging complete set. 82 High Pressure Testing 83 Interloking Soling and gravels in switch yard as per Norms. 84 Provide bucket with bucket stand as per norms (3nos bucket for sand & 3 nos bucket for water in one set.) 85 Making of Firewall 86 Cable Trench Dismentallingin switch yard 87 Dismantling of Isolator Structure 88 Dismantling & refixing of 11 KV Cable stand 89 Dismantling of 33 KV PT & Structure 90 Provided NOC from Electrical Safety department beforEnergization of 5 MVA Transformer. (The amount willl be reimbursed as per actual expenditure/receipt issued by concerned department upto maximim limit of Rs. 50000.00) 91 Return balance material to LESA store daliganj and other work in site area

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 21-Jan-2025 Date Extension 01 Date 24-Jan-2025

BOQ

Name of Work: “Installation of Additional 05 MVA Transformer at 33/11 KV Substation Nadarganj Old Under EDD-Nadarganj and other associated works”
Sl. No. Item Description
1Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dumps store and from JE dump store to work site within municipal area.
233 KV VCB 800 Amp. 750 MVA
333 KV Control Pannel single circuit Transformer
433 KV Control Pannel Single Feeder
533KVCurrent Transformer 200/100/1
633KVCurrent Transformer 400/200/1
711 KV Incoming VCB 600/300/5A, 350 MVA
811 KV Out going VCB 200/100/5A, 350 MVA
911 KV VCB Bus coupler, 350 MVA
1011 KV 3x300mm2 XLPE Cable
1111 KV3x300mm2Outdoor Termination Kit
1211 KV3x300mm2Indoor Termination Kit
1311 KV3x185mm2 XLPE Cable
1411 KV3x185mm2Outdoor Termination Kit
1511 KV3x185mm2Indoor Termination Kit
1633 KV Lightening Arrester
1733 KVBus Isolator
1833 KVLine Isolator
19Battery charger 24 Volt
20Battery set 24 Volt
21ACSR Panther Conductor for Bus Bar
22Copper Control Cable 2x2.5 Sq. mm.
23Copper Control Cable 4x2.5 Sq. mm.
24ST pole 11 mtr long
25M.S.channel 100x50 sq mm
26M.S.Angle 65x65x6 sq mm
2711 kv pin insulator
28M S Earthing Rod 20x2500 mm
2911 kv pin with nut
301x240 LT XLPE Cable
31MS Channel 125x65mm 3.5m long 4 Nos Pieces [email protected] Kg. Mtr. With wastage
32MS Angle 75x75x6, 2.6M 2 Nos Total [email protected] Kg./M with wastage
33MS Round of 32 mm dia for laying of main earthmat in switch yard & for panel earthing bridge [email protected] Kg./M
34MS Round of 32mm dia for making MS earth electrode 32x3000mm. [email protected] Kg./M
35Rail 105 lb 9 mtr long
36Earthing of substation Switchyard.
37Earthing of substation Switchyard complete by round bar 32 mm dia exavation of earth for laying of earth mat 750mm deep and proper leveling after laying of earth mat Complete as per specification and connecation of all switchyard equipment by GI Flat 50x6 mm (The contractor shall arrange all the material except MS Round Bar 32 MM)
38Cutting ,fabrication and driving of earth electrode of size 32x3000 mm
39Cutting shaping, laying and welding of riser strip size 50x6mm G.I strip of size 50x6 mm in between earth mat and equipments /structure/body of T/F for earthing (two nos Riser for each structure equipment individually GI strip shall be provided contractor )
40Earthing of Indoor Equipment by making of 2 Nos. Quard of round bar 32 mm dia as per norms.
41Outdoor switch yard & aproch roadLighting
42Switch Yard fencing with Toe wall
43Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel).
44Painting of all structures equipment.
45Construction of Power T/F plinth suitable for 33/11KV 05 MVA power T/F of size 4x3x1.3 having 0.4 mtr height above ground level. The work includes excavation of foundation base concreting in cc ratio 1:6 Mas 12 1st class brick work in ratio 1:4 with coarse sand ,foundation cc in ratio 1:4:8using M.S bar of 12 mm dia for reinforcementthe work includes laying of 2 nos rail pieces 4 mtr long as per drawing/practice the plinth shall be finished in all respect. (only rail piece and M.S angle provided by the department)
46Construction of masonry type plinth for 33KV VCB of size 1.6x1.6x1 M brick, sand, cement and stone grit including grouting of 4 Nos foundation Bolts for erection of 33KV VCB.
47Fabrication & erection of 11 KV cable exposure type double pole with the provission ofcable with fixing of necesory clamps and other acessories like danger board,number plate,barbed wire,2 no. channels 100x50mm (1600mm each),1 no.MS channel 100x50mm(3200mm in length) for supporting the hoisting of cable & poles.its jumpering by single core PVC aluminium cable with proper size Al.lug after making three phase busbar with help of 11 KV pin,pin insulator and PVC cable. (all material arranged by contractor except steel,pole & insulator).as per RESPO norms.
48Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting os structure complete.(only M.S channel and angle provided by the deptt)
49Lightning Arrestor/ CT structure : - Fabrication of lightning arrestor/CT structureas per RESSPO drawing with the help of 2 nos M.S channel 125x65 mm minimum 3.5 mtr long grouting 1 mtr deep from ground level in cc in ratio 1:4:8. complete in all respect.
50Extension of 33 kV Bus Bar Gantary complete with structure and other required work. (Except rail/angle/channel/panther conductor all required materials provided by contractor)
51Erection of structures, grouting, plinthing of ALL structuresequipment.
52Mounting of accessories/equipment on fabricated structure complete work with making proper alignment and tightening the work includes fabrication work if required for proper operation of equipment .
5333 KV VCB
54CT 200/100/1-A
5533 KV lightning Arrestors
56Bus/Line Isolator
57Fabrication & Erection of Neutral Stand structure with foundation
58Erection, commissioning and Testing of 05 MVA T/F mounting of radiator conservator tank exposure vent etc. Filling of T/F oil in radiator conservator tank with complete work as per RESPO Norms.
59Jumpering complete T/F bay with ACSR panther Cond. and required clamp with nut & Bolts from 33KV existing bus bar to T/F & other all required work. ( Except Panther Conductor all required material provided by Contractor.)
60Jumpering complete Line bay with ACSR panther Cond. and required clamp with nut & Bolts from 33KV existing bus bar to cable stand & other all required work. ( Except Panther Conductor all required material provided by Contractor.)
61Laying ofDouble circuit 11 KV 3x300 sq mm XLPE cable in normal soil/allready Constructed trench/As per Site Condition by digging of suitable size of trench as per site condition cable should be covered by bricks and sand with cleaning of Existing Trench.
62Hoisting, jumpering, clamping of 11KV 3x300 sq mm XLPE cable on cable stand, panelwith proper taping with the help of empire tape. PVC tape and connectors.
63Hoisting of 11KV3X185 sqmm XLPE cable on double pole with MS pipe/GI pipe of size 5/6\" dia 3 M longincluding its jumpering complete with clamps, nuts and bolts(all material arranged by contractor).
64Laying of Single circuit 11 KV 3x185 sq mm XLPE cable in normal soil/already Constructed trench/As per Site Condition by digging of suitable size of trench as per site condition cable should be covered by bricks and sand with cleaning of Existing Trench.
65Hoisting, jumpering, clamping of 11KV 3x185 sq mm XLPE cable on 11 KV panelswith proper taping with the help of empire tape. PVC tape and connectors.
66Construction of Control cable trench of size 150 mm wide 300 mm deep with brick work along with provision trench cover M.S strip at the interval of 0.30 M and M.S angle at both the edge of the trench.
67Construction and fixing of trench cover0.5 M wide 0.75 mm thick with cement, coarse sand & stone grit in ratio 1:2:4 for covering of cable trench150 mm wide with provision of M.S Angle as per RESPO Norms
68Laying of copper control cable of following sizes its proper dressing ,ferruling and connection with the system as per Site Condition with cleaning of Existing Trench.( except control cable all the material shall be provided by contractor) as per norms
69Copper Control Cable 2x2.5 Sq. mm.
70Copper Control Cable 4x2.5 Sq. mm.
71Pipe boring type earthing minimum 20 mtr deepfrom ground level or upto water level with B class G.I. pipe 2 \" dia. Connection of equipment with earthing by GI strip 50x6 mm included in the job as per specification/norms for power transformer, VCB, CT/LA and other. (All materials will be Provided by contractor)
72PG Clamp Panther
73Dragging of following panels (Control and feeder pannel) from unloading place upto control room and placement erection and grouting, commissioning & testing of the same as per RESPO Norms
7433 KV T/F Control panel
7533 KV Control Pannel Single Feeder
7611 KVBus coupler, 350 MVA
7711 KV Incoming VCB 600/300/5A
7811 KV Out going VCB 200/100/5A
79Supply of following auxiliary material
80Rabber mat 2x1.5 Mtr.
81Erection of 24 V batteries set with charger including stand (except 24 V batteries set with charger all the material & stand shall be provided by contractor) & initial charging complete set.
82High Pressure Testing
83Interloking Soling and gravels in switch yard as per Norms.
84Provide bucket with bucket stand as per norms (3nos bucket for sand & 3 nos bucket for water in one set.)
85Making of Firewall
86Cable Trench Dismentallingin switch yard
87Dismantling of Isolator Structure
88Dismantling & refixing of 11 KV Cable stand
89Dismantling of 33 KV PT & Structure
90Provided NOC from Electrical Safety department beforEnergization of 5 MVA Transformer. (The amount willl be reimbursed as per actual expenditure/receipt issued by concerned department upto maximim limit of Rs. 50000.00)
91Return balance material to LESA store daliganj and other work in site area

AI Tender Summary

OUR REF NO 47231275
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 38.86 Lakhs
LAST DATE 24-01-2025
Authority
Authority Name Madhyanchal Vidut Vitran Nigam Limited
Work Description tender for Installation of Additional 05 MVA Transformer at 33/11 KV Substation Nadarganj Old Under EDD-Nadarganj and other associated works” Sl. No. Item Description 1 Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dumps store and from JE dump store to work site within municipal area. 2 33 KV VCB 800 Amp. 750 MVA 3 33 KV Control Pannel single circuit Transformer 4 33 KV Control Pannel Single Feeder 5 33KVCurrent Transformer 200/100/1 6 33KVCurrent Transformer 400/200/1 7 11 KV Incoming VCB 600/300/5A, 350 MVA 8 11 KV Out going VCB 200/100/5A, 350 MVA 9 11 KV VCB Bus coupler, 350 MVA 10 11 KV 3x300mm2 XLPE Cable 11 11 KV3x300mm2Outdoor Termination Kit 12 11 KV3x300mm2Indoor Termination Kit 13 11 KV3x185mm2 XLPE Cable 14 11 KV3x185mm2Outdoor Termination Kit 15 11 KV3x185mm2Indoor Termination Kit 16 33 KV Lightening Arrester 17 33 KVBus Isolator 18 33 KVLine Isolator 19 Battery charger 24 Volt 20 Battery set 24 Volt 21 ACSR Panther Conductor for Bus Bar 22 Copper Control Cable 2x2.5 Sq. mm. 23 Copper Control Cable 4x2.5 Sq. mm. 24 ST pole 11 mtr long 25 M.S.channel 100x50 sq mm 26 M.S.Angle 65x65x6 sq mm 27 11 kv pin insulator 28 M S Earthing Rod 20x2500 mm 29 11 kv pin with nut 30 1x240 LT XLPE Cable 31 MS Channel 125x65mm 3.5m long 4 Nos Pieces [email protected] Kg. Mtr. With wastage 32 MS Angle 75x75x6, 2.6M 2 Nos Total [email protected] Kg./M with wastage 33 MS Round of 32 mm dia for laying of main earthmat in switch yard & for panel earthing bridge [email protected] Kg./M 34 MS Round of 32mm dia for making MS earth electrode 32x3000mm. [email protected] Kg./M 35 Rail 105 lb 9 mtr long 36 Earthing of substation Switchyard. 37 Earthing of substation Switchyard complete by round bar 32 mm dia exavation of earth for laying of earth mat 750mm deep and proper leveling after laying of earth mat Complete as per specification and connecation of all switchyard equipment by GI Flat 50x6 mm (The contractor shall arrange all the material except MS Round Bar 32 MM) 38 Cutting ,fabrication and driving of earth electrode of size 32x3000 mm 39 Cutting shaping, laying and welding of riser strip size 50x6mm G.I strip of size 50x6 mm in between earth mat and equipments /structure/body of T/F for earthing (two nos Riser for each structure equipment individually GI strip shall be provided contractor ) 40 Earthing of Indoor Equipment by making of 2 Nos. Quard of round bar 32 mm dia as per norms. 41 Outdoor switch yard & aproch roadLighting 42 Switch Yard fencing with Toe wall 43 Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel). 44 Painting of all structures equipment. 45 Construction of Power T/F plinth suitable for 33/11KV 05 MVA power T/F of size 4x3x1.3 having 0.4 mtr height above ground level. The work includes excavation of foundation base concreting in cc ratio 1:6 Mas 12 1st class brick work in ratio 1:4 with coarse sand ,foundation cc in ratio 1:4:8using M.S bar of 12 mm dia for reinforcementthe work includes laying of 2 nos rail pieces 4 mtr long as per drawing/practice the plinth shall be finished in all respect. (only rail piece and M.S angle provided by the department) 46 Construction of masonry type plinth for 33KV VCB of size 1.6x1.6x1 M brick, sand, cement and stone grit including grouting of 4 Nos foundation Bolts for erection of 33KV VCB. 47 Fabrication & erection of 11 KV cable exposure type double pole with the provission ofcable with fixing of necesory clamps and other acessories like danger board,number plate,barbed wire,2 no. channels 100x50mm (1600mm each),1 no.MS channel 100x50mm(3200mm in length) for supporting the hoisting of cable & poles.its jumpering by single core PVC aluminium cable with proper size Al.lug after making three phase busbar with help of 11 KV pin,pin insulator and PVC cable. (all material arranged by contractor except steel,pole & insulator).as per RESPO norms. 48 Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting os structure complete.(only M.S channel and angle provided by the deptt) 49 Lightning Arrestor/ CT structure : - Fabrication of lightning arrestor/CT structureas per RESSPO drawing with the help of 2 nos M.S channel 125x65 mm minimum 3.5 mtr long grouting 1 mtr deep from ground level in cc in ratio 1:4:8. complete in all respect. 50 Extension of 33 kV Bus Bar Gantary complete with structure and other required work. (Except rail/angle/channel/panther conductor all required materials provided by contractor) 51 Erection of structures, grouting, plinthing of ALL structuresequipment. 52 Mounting of accessories/equipment on fabricated structure complete work with making proper alignment and tightening the work includes fabrication work if required for proper operation of equipment . 53 33 KV VCB 54 CT 200/100/1-A 55 33 KV lightning Arrestors 56 Bus/Line Isolator 57 Fabrication & Erection of Neutral Stand structure with foundation 58 Erection, commissioning and Testing of 05 MVA T/F mounting of radiator conservator tank exposure vent etc. Filling of T/F oil in radiator conservator tank with complete work as per RESPO Norms. 59 Jumpering complete T/F bay with ACSR panther Cond. and required clamp with nut & Bolts from 33KV existing bus bar to T/F & other all required work. ( Except Panther Conductor all required material provided by Contractor.) 60 Jumpering complete Line bay with ACSR panther Cond. and required clamp with nut & Bolts from 33KV existing bus bar to cable stand & other all required work. ( Except Panther Conductor all required material provided by Contractor.) 61 Laying ofDouble circuit 11 KV 3x300 sq mm XLPE cable in normal soil/allready Constructed trench/As per Site Condition by digging of suitable size of trench as per site condition cable should be covered by bricks and sand with cleaning of Existing Trench. 62 Hoisting, jumpering, clamping of 11KV 3x300 sq mm XLPE cable on cable stand, panelwith proper taping with the help of empire tape. PVC tape and connectors. 63 Hoisting of 11KV3X185 sqmm XLPE cable on double pole with MS pipe/GI pipe of size 5/6 dia 3 M longincluding its jumpering complete with clamps, nuts and bolts(all material arranged by contractor). 64 Laying of Single circuit 11 KV 3x185 sq mm XLPE cable in normal soil/already Constructed trench/As per Site Condition by digging of suitable size of trench as per site condition cable should be covered by bricks and sand with cleaning of Existing Trench. 65 Hoisting, jumpering, clamping of 11KV 3x185 sq mm XLPE cable on 11 KV panelswith proper taping with the help of empire tape. PVC tape and connectors. 66 Construction of Control cable trench of size 150 mm wide 300 mm deep with brick work along with provision trench cover M.S strip at the interval of 0.30 M and M.S angle at both the edge of the trench. 67 Construction and fixing of trench cover0.5 M wide 0.75 mm thick with cement, coarse sand & stone grit in ratio 1:2:4 for covering of cable trench150 mm wide with provision of M.S Angle as per RESPO Norms 68 Laying of copper control cable of following sizes its proper dressing ,ferruling and connection with the system as per Site Condition with cleaning of Existing Trench.( except control cable all the material shall be provided by contractor) as per norms 69 Copper Control Cable 2x2.5 Sq. mm. 70 Copper Control Cable 4x2.5 Sq. mm. 71 Pipe boring type earthing minimum 20 mtr deepfrom ground level or upto water level with B class G.I. pipe 2 dia. Connection of equipment with earthing by GI strip 50x6 mm included in the job as per specification/norms for power transformer, VCB, CT/LA and other. (All materials will be Provided by contractor) 72 PG Clamp Panther 73 Dragging of following panels (Control and feeder pannel) from unloading place upto control room and placement erection and grouting, commissioning & testing of the same as per RESPO Norms 74 33 KV T/F Control panel 75 33 KV Control Pannel Single Feeder 76 11 KVBus coupler, 350 MVA 77 11 KV Incoming VCB 600/300/5A 78 11 KV Out going VCB 200/100/5A 79 Supply of following auxiliary material 80 Rabber mat 2x1.5 Mtr. 81 Erection of 24 V batteries set with charger including stand (except 24 V batteries set with charger all the material & stand shall be provided by contractor) & initial charging complete set. 82 High Pressure Testing 83 Interloking Soling and gravels in switch yard as per Norms. 84 Provide bucket with bucket stand as per norms (3nos bucket for sand & 3 nos bucket for water in one set.) 85 Making of Firewall 86 Cable Trench Dismentallingin switch yard 87 Dismantling of Isolator Structure 88 Dismantling & refixing of 11 KV Cable stand 89 Dismantling of 33 KV PT & Structure 90 Provided NOC from Electrical Safety department beforEnergization of 5 MVA Transformer. (The amount willl be reimbursed as per actual expenditure/receipt issued by concerned department upto maximim limit of Rs. 50000.00) 91 Return balance material to LESA store daliganj and other work in site area
Basic Detail
Tender No 19/EUCC-V/LESA/2024-25
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 21 Jan 2025
Submission Date 24 Jan 2025
Open Date 25 Jan 2025
Finance
Tender Value 38.86 Lakhs
Tender Fee 3540
EMD 38900
Exemption Not Available
Document List
uploadeddocs.pdf
Tendernotice_1.pdf
14b9705e-0311-4136-9015-c7d598e1d995.html
BOQ_1757058.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 21, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 24, 2025
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jan 24, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 25, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

uploadeddocs.pdf

pdf

Tendernotice_1.pdf

html

14b9705e-0311-4136-9015-c7d598e1d995.html

xls

BOQ_1757058.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender