|
| 1 | Schedule \"A\" |
| 2 | Excavating over areas not exc 1.5m deep and getting out in hard and dense soil and removing the excavated material upto a distance of 50m complete all as specified and directed. |
| 3 | Excavating over areas, exe1.5m deep but not exc 3m deep and getting out in hard and dense soil and removing the excavated material upto a distance of 50m complete all as specified and directed. |
| 4 | Excavating over areas, exe 3m deep but not exc 4.5m deep and getting out in hard and dense soil and removing the excavated material upto a distance of 50m complete all as specified and directed. |
| 5 | Excavation in trenches not exceeding 1.5m wide and exceeding 3m to 4m in depth for foundation n.exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in lintel upto 1.5m clear span, cill, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height and as in coping, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating incl necessary formwork etccomplete all as specified and directed. |
| 7 | M&L for PCC 1:4:8 Type D2 (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed. |
| 8 | M&L for brickwork with sub class \"B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) ascoping on brick drain including weathering, slightly rounded or chamfered angles and throating incl necessary formwork etccomplete all as specified and directed. |
| 10 | M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and even without extrausingcement complete all as specified and directed. |
| 11 | M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in benching of drain, surface channel complete all as specified and directed. |
| 12 | M & L TMT mild steel bars 6mm to 8 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed. |
| 13 | M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 14 | M&L for precast cement concrete1:2:4 type B1 (using 20mm graded stone aggregate) in coverslabs (for drain, manhole etc)with plain fair face including chamfers , weatherings, throating etc and similar work set in CM 1:4 including with formwork allas speicified and directed. |
| 15 | M&L for RCC M-25 (using 20 mm graded aggregate) as in slab supported on walls,beams and columns,roof/chajja , landing ,balconies ,canopies,deck slab and shelves etc complete all as specified and directed.(Note- Form work and reinforcement will be measured and paid separately.) |
| 16 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed. |
| 17 | M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed |
| 18 | M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions to rough finished surfaces ofconcrete complete all as specified and directed. |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed. |
| 20 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 21 | Supply only intergral water proofing compound. |
| 22 | M&Lfor loose filling with brocken bricks aggregates of gauge 80 to 150 mm in sokage wells complete all as specified and directed. |
| 23 | M&L for salt glazed stone ware drain pipes of 150 mm diacomplete all as specified and as directed. |
| 24 | S& F reinforced concrete pipes 150mm dia class NP-2 laid and jointed complete with collars as directed by engineer in charge for the following dia cement complete all as specified and as directed. |
| 25 | S&F PVC (SWR) vent cowl of dia 110 mmcomplete all as directed and directed. |
| 26 | M&L for concrete bed to drain pipes 150mm including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete( 1:3:6) type C2 complete all as specified and directed. |
| 27 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 28 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in sofe/loose soil complete all as specified and directed. |
| 29 | M&L 50mm thick plain cement concretegrade 1:2:4 Type B2 Nominal mix ( using 40mm graded crushed stone aggregateas) in floor, finishes even and fair to receive floor tiles complete all as specified and directed. |
| 30 | M&L for Hardcore of broken stone or boulder ofgauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 31 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backingin CM (1:3) complete all as specified and directed. |
| 32 | M & L for non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 33 | M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 34 | S&F GI pipe heavy class 50mm dia complete all as specified and directed. |
| 35 | S&F 50mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed. |
| 36 | S&F 40mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed. |
| 37 | M&L for drilling and tapping cast iron/ ductile iron/ GI water mains (in position) for branch connections of internal dia 40 mm. complete all as specified and directed |
| 38 | S&F GI tubing 40mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 39 | M&L for rolled mild steel structural works as framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to .Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 40 | M&L forpreparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 41 | S & F in door or window frame of any description with aluminium sections, coloured powder coating not less than 50 micronand fixing in position including all necessary cleats, lugs, breading and jointing arrangements complete all specified and directed. |
| 42 | S&FAnodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron)of any colourdoor shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc. including all fittings complete all as specified and directed. |
| 43 | M&Lfor4.8 mm thick tinted sheet glass,ordinary quality and glazing with including necessary joining cleats, glazing clips, rubber packing in any shape n exc 0.5 sq. m in each pane for aluminumwindow complete all as specified and directed |
| 44 | S&F 12mm thick medium density fibre board, exterior grade, fixed to aluminium frame etc. complete all as specified and directed. |
| 45 | S&F top roller assembly for aluminium sliding door fixed to aluminium G channel frame etc.complete all as specified and directed. |
