Construction Of Icds Center At Mouza And Village Basusuba (19328211117), Under Chapadanga Gp Within Kranti Block Jalpaiguri
Tender Value
12.95 Lakhs
Estimated cost
Bid Submission
28 Jan 2025
0 days left
EMD
25919
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kranti → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Icds Center At Mouza And Village Basusuba (19328211117), Under Chapadanga Gp Within Kranti Block Jalpaiguri
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.250 Thick Wall125 Thick Wall |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(a) With earth obtained from excavation of foundation1/5th of foundation |
| 3 | (b) With earth obtained by fresh excavation (including cost ofexcavation upto 1,800 mm. depth) from land arranged by theDeptt. within a lead of 100 mPlay Ground including ramp |
| 4 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand.Play GroundFloor |
| 5 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.FloorRampPlinth Protection |
| 6 | Supplying and laying Polythene Sheet (150gm / sq.m ) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenchesRoofFound (250 th Wall)Found (125 th Wall)F/Beam & R/Beam |
| 7 | Pre-Constructional Anti-termite measures:(a) Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides (uptoaheightof300mm.frombottom)ofthe excavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specificationdescribed in6.2.1.ofcodeIS- 6313 (part -II) 1981. (Mode of measurment will be the plan area of foundation treated.)Foundation |
| 8 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering. :: N.B. Variety :: In ground floor (1:4:8 proportion)FoundationCol for boundary |
| 9 | Cement concrete with 30 mm down graded shingles excluding shuttering. :: N.B. Variety :: In ground floor (1:3:6 proportion)Floor |
| 10 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size)excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River Bazree :: Ground Floor |
| 11 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 12 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction ::: (a) For works in foundation and upto roof of ground floor/upto 4 m ::: (i) Tor steel/Mild Steel ::: I. SAIL/ TATA/RINL |
| 13 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 14 | Brick work with 1st class bricks in cement mortar (1:6)b) In superstructure, ground floor |
| 15 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 16 | (a) 75 mm thick brick work with 1st class bricks set in sand cement mortar (4:1) in ground floor including H.B netting in every alternate layers |
| 17 | 25mm thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer’s specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface)[Note: - Waterproofing as per item NO 60. polymer based paint as per item 59 (a) of Section (C). |
| 18 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] ::With 1:4 cement mortar :: 20 mm thick plaster |
| 19 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] :: With 1:4 cement mortar :: 15 mm thick plaster |
| 20 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] ::With 1:4 cement mortar :: 10 mm thick plaster |
| 21 | Labour for chipping of concrete surface before taking up plastering work :: GF- Area of 10 mm thick plaster |
| 22 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item isnot permitted with ordinary cement).Using grey cement :: i)25 mm. thick |
| 23 | Neat cement punning about 1.5mm thick in wall, Neat cement punning about 1.5mm thick in wall, dado, window,sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.Plinth |
| 24 | Wood work in door and window frame fitted and fixed complete icluding a protective coat of painting at the contact surface of the frame. :: (d) Sal : Local. :: G/Floor |
| 25 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hige and other fittings.In ground floor(In case of non-supply of single plank, penal rate of reduction of 20% will be made) :: (lii) 35mm thick shutters with 19mm thick panel of size 30 to 45 Cm© other local wood |
| 26 | Supplying, Fitting & Fixing Factory made prelaminated P V C door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1 5 mm long brackets of 15 mm x15 mm M S square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S Screws through the frame by using P V.C fasteners A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc complete as per Manufacturer\"s specification and direction of Engineer-in-Charge |
| 27 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M S frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles Srails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive An additional 5 mm th PVC strip of 20 mm which is to be stuck on the interior side of the \"C\" channel using PVC solvent adhesive etc complete excluding all necessary hardwares as per direction of Engineer-in-Charge |
| 28 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 29 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar. end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction (Cost of concrete will be paid separately)(b) 40mm X 6mm, 200mm Length |
| 30 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3 50mm |
| 31 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and fixed with cadmium plated screws:(ix) 300mm long x 10mm dia bolt. |
| 32 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactgured from extruded section conforming to IS specification (I.S 2681/66) fitted and fixed complete(iii) 300mm long x 16mm dia bolt. |
| 33 | Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I S 230/72) fitted and fixed complete(a) With continuous plate base (hexagonal/round rod) :: (vi) 150 mm grip x 10mm dia rod. |
| 34 | 125mm long wooden buffer block ::i)With Sal : Siliguri. |
| 35 | Supplying fitting and fixing UPVC pipes A - type and fittings conforming to IS 13592-1992 with necessary clamos nails including making holes in walls, etc and cutting trenches in any soil through masonry concrete structure etc if necessary and mending good damages including jointing with jornting materials ( Spun yarn, valamoid / bitumen / M seal etc ) complete (ii) 110 mm Dia |
| 36 | Supplying fitting and fixing UPVC pipes A - type and fittings conforming to IS 13592-1992 with necessary clamos nails including making holes in walls, etc and cutting trenches in any soil through masonry concrete structure etc if necessary and mending good damages including jointing with jornting materials ( Spun yarn, valamoid / bitumen / M seal etc ) complete d) Shoe :: ii) 110 mm |
| 37 | Supplying fitting and fixing UPVC pipes A - type and fittings conforming to IS 13592-1992 with necessary clamos nails including making holes in walls, etc and cutting trenches in any soil through masonry concrete structure etc if necessary and mending good damages including jointing with jornting materials ( Spun yarn, valamoid / bitumen / M seal etc ) complete c) Bend 87 5 degree (ii) 110mm |
| 38 | a)Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Steel Window |
| 39 | (b) Priming one coat on timbei plastered surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc |
| 40 | (A) Painting with best quality synthetic enamel paint of approved mane and brand inciuding smoothenmg surface by sand papering etc including using of approved putty etc. on the surface, if necessary ::: With super gloss (hi-gloss) -(a) On timber or plastered surface :: (iv) Two coats (with any shade except white) |
| 41 | (A) Painting with best quality synthetic enamel paint of approved mane and brand inciuding smoothenmg surface by sand papering etc including using of approved putty etc. on the surface, if necessary ::: With super gloss (hi-gloss) -(b) On steel or other metal surface :: (iv) Two coats (with any shade except white) |
| 42 | White washing including cleaning and smoothening surface thoroughly(c) Three coats (on new works only).(a) On timber or plastered surface :: (iv) Two coats (with any shade except white)Plastered Area :: Ref Item 19,& 21 |
| 43 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification(iii) External surface (Ground floor) :: Two CoatPlastered Area :: Ref Item 20 |
| 44 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and \" floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor :: With Sand Cement Mortar (1 4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0 20kg/Sq.m. :: (a) Area of each tile upto 0.09 Sq m :: (ii) Other than Coloured decorative including white |
| 45 | Precast pierced concrete jally work as per design and manufacturer’s specification including moulding etc with stone chips and necessary reinforcement shuttering complete including fitting, fixing in position in all floors :: (b) 37 5 mm thick panels |
| 46 | Supplying and laying chequered tiles of any shade & of approved quality with (1:114:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @44 kg/Sq.m at back side and @2.4 kg/Sq.m for Joint filling] :: 25 mm thick |
| 47 | Galvanised Iron pipe outlet for water with bevelled end at outlet, supplied fitted and fixed complete including painting two coats to the exposed Portion. :: © 40 mm. Dia. |
| 48 | Hire and labour charges for 75 mm dia bamboo railing on Jhau/Eucalyptus or other approved timber\bamboo posts 1 4 m above G L and 0.60 m below G.L including tying strongly with coir ropes and boring holes for posts in any soil/ concrete surface/Bituminious surface packing the sides etc including cost of carriage of all materials and labour complete including cost of restoration to the damages of the ground to its original condition as per direction of Engineer in charge after removing the barricade ( Cost of restoration would be paid separately ). (b) 75mm dia bamboo railing & 125mm. dia bamboo posts @ 1 60m apart. :: (i) Railing with 4 rows. |
| 49 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavationearth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwedasper IS:2470,Part- I.Payment will be made separetly on the basis ofactual height based on relevant I.S.Code.B) With Bazree (N.B Varity) (SAIL/TATA/RINL) :: (i) For 10 users |
| 50 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.ii) With Bazree (N.B Variety) (SAIL/TATA/RINL) |
| 51 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. :: (SAIL/TATA/RINL) |
| 52 | Supplying P V C water storage tank of approved quality with closed top with lid (Black) - Multilayer :: (a) 500 litre capacity |
| 53 | Labour for hoisting plastic water storage tank :: i) Upto 1500 litre capacity ::: (a) Upto 1st story from G.L. |
| 54 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 55 | Supplying, fitting and fixing bibs cock or stop cock. (f) (ii) Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) i) 15 mm |
| 56 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I),with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work :: PVC Pipes15 mm dia |
| 57 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I),with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work :: PVC Pipes20 mm dia |
| 58 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I),with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work :: PVC Pipes25 mm dia |
| 59 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of cnnrrpfp fnr fivinal (ii) 530 mm X 410 mm |
| 60 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately) (a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.(ii) 100 mm dia. (internal) |
| 61 | Supplying, fitting and fixing cast iron \"P\" or \"S\" trap conforing to I.S. 3989 / 2009 and 1729 / 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to he naid senerately.) A) P trap iii)100mm. |
| 62 | Supplying, fitting and fixing check valve (vertical) G.M. tested to 21 kg per sq. cm. (v) 40 mm |
| 63 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines Only) (v) 40 mm |
| 64 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(a) For depth upto 150 metre :: (i) 40 mm dia. boring etc. |
| 65 | Supply of G. I. pipes of TATA make including necessary socketse) 40 mm dia. :: ii) Medium quality |
| 66 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part -1), with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads.fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)ii) Medium quality :: (a) For Exposed Work ::PVC Pipes:: 40 mm Dia |
| 67 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. :: (i) 40 mm dia. |
| 68 | Supplying, fitting and fixing plug of approved make conforming to I.S specifications. :: (i) 40 mm Dia |
| 69 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. :: (i) 40 mm Dia |
| 70 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 71 | Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necsssary report |
| 72 | Supplying, fitting and fixing popular Maya pump no-6 or similar. i) For 40 mm dia. tube well |
| 73 | Brick work with 1st class bricks in cementmortar (6:1) :: For water Tank placing :: (a) In foundation and plinth |
| 74 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 75 | Cement concrete with 30 mm down graded shingles excluding shuttering. :: N.B. Variety :: In ground floor (1:3:6 proportion) |
| 76 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item isnot permitted with ordinary cement).Using grey cement :: i)25 mm. thickPlatform |
| 77 | Supplying and fixing Sheet steel Main Switches on flat iron frame on wall, 240V DP with fuse on L&N 15/16 A Havells Make |
| 78 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 4 Way Legrand |
| 79 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 32A, DP Legrand |
| 80 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A SP Legrand |
| 81 | Distribution wiring in 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required a) 2x1.5 sqmm +1x1.5 sqmm |
| 82 | Distribution wiring in 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required b) 2 X 2.5 sqmm + 1 X 1.5 sqmm as ECC |
| 83 | Supply and Drawing 2 Core 4 Sqmm multicore Round PVC insulated wire by stringing sagging 10SWG GI wire incl. necessay reel insulator and necessay connection. |
| 84 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes a) 2.5 Sq mm |
| 85 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes b) 4.0 Sq mm |
| 86 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Average run 8 Mtr |
| 87 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On board |
| 88 | Supply & Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener. Havells Make Mumiline Plus 20W including lamp |
| 89 | Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting - (As per Drawing no. 475 of PWD Specification Book - May 1991) |
| 90 | Supply and Fixing 1200mm/1400mm dia AC230/250 Volts, 50Hz ceiling fan complete with blades, regulator, canopy, fork, rubber bush etc. incl. S&F 2x1/1.40 pvc wire for down rod upto 30cm incl. Painting the rod with approved paint and making necessary connection as required. a) 1200mm Sweep AC ceiling fan Orient PSPO |
| 91 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. |
| 92 | S&F decorative LED based wall bracket incl lamp and all accessories incl lamp 9 W LED retrofit as per choise of EIC |
| 93 | Earthing with 50mm dia Galvanised iron pipe 3.64mm thick x 3mts long and 1x4SWG GI wire (1Mts long) 13mmx80mm dia GI bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection as to GS. By TATA Medium GI pipe for soft soil. |
| 94 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages a) No 4 SWG |
| 95 | PV Module ::: Supplying, fixing, commissioning and testing solor Photo Voltaic Module (1600Wp) Monocrystalline Silicon solar cells laminated between sheet of -Ethylene Vinyl Acetate (EVA) and high transmissivity 3mm tempered glass. connforming to IEC 61215(revised) specifications or equivalent National or International Standards . The power output of the module(s) under STC should be a minimum of 250 W. The operating voltage corresponding to the power output mentioned above should be 16.4 V. The open circuit voltage of the PV modules under STC should be at least 21.0 Volts. The terminal box IP 65 Protection level on the module should have a provision for opening for replacing module. |
| 96 | M.S.structuralworkswithhollowsections(squareorrectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. |
| 97 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With super gloss (hi-gloss) Two coats (with any shade except white) |
| 98 | Power Conditioning Unit (PCU) cum Inverter Supplying, fixing, commissioning and testing power conditioning unit cum Off grid Inverter consisting with PCU Switching elements MOSFET Type of Charger PWM with MPPT technology from Normal AC Output Power: Solar Inverter, Hybrid 2200, Wave Form: Pure Sine Wave, Capacity:2000, Nominal Voltage: 24V, Efficiency: 85%, Output Voltage: 220V, Input Voltage: 90V-220V, Nominal Battery Voltage: 220V ± 7V, Output Frequency: 50Hz ± 1Hz, Warranty:24 Months (APC/Sukam/SMA/KACO/Exide) make |
| 99 | Supply & Installation of BATTERY Lead Acid, tubular positive plate flooded electrolyte or Gel / VRLA Type. The battery will have a minimum rating of 12V, 60 Ah at C/10 discharge rate. 3.75 % of the rated capacity of the battery should be between fully charged and load cut off conditions. iv. Battery should conform to the latest BIS/ International standards.(Exide make) |
| 100 | Supplying , fitting and fixing of Sand Filter - Manual as per IS:14606Sand Filter :: 10 m³/ hr-M Single |
| 101 | Supply and Installation Tough Trolley for Inverter and Battery OUTER BOX DIMENSIONS 23.5CM X 8CM X 16CM AND AFTER IT GETS ASSEMBELED 600MM X 318MM X 525MM, DIEMNSIONS ARE Tough-X Battery Trolley is an elegantly designed product, which is sturdy and yet, pleasing to the eye.batteries.Ultra Durable made from high-grade plastic material, Super Compatible works with all types of batteries, Easy to assemble, Top-Notch Built Wheels of premium quality, Head-Turner A perfect match of looks with your inverter battery set. weight 4.5kg |
| 102 | Supply & Fixing 230V AC single Phase 0.75HP Pump motor for an Avg head 15m and necessay connection etc as required (Crompton/CRI/Kriloskar make) |
| 103 | ADD :- Bala model painting ::: As per Submitted Voucher |
| 104 | ADD :- Height Measure Scale ::: As per Submitted Voucher |
| 105 | ADD :- Swing ::: As per Submitted Voucher |
| 106 | ADD :- Slider ::: As per Submitted Voucher |
| 107 | ADD :- Seasaw ::: As per Submitted Voucher |
| 108 | ADD :- Rope climbing by cotton net (on ground filled with sand) ::: As per Submitted Voucher |
| 109 | ADD :- Mirror- 1 No. (4 ft. height) ::: As per Submitted Voucher |
| 110 | ADD :- Wall Clock- 1 No. ::: As per Submitted Voucher |
| 111 | ADD :- Pressure Cooker 5 ltr- 1 Nos.::: As per Submitted Voucher |
| 112 | ADD :- Steel Food Containers::: As per Submitted Voucher |
| 113 | ADD :- Black Board ::: As per Submitted Voucher |
| 114 | ADD :- Display Board / Writing ::: As per Submitted Voucher |
| 115 | Add:- GST @ 18% |
| 116 | Add:- Labour Welfare Cess @ 1% |
AI Tender Summary
Tender Timeline
Jan 13, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender