Tender For Certain Misc B/R Repairs In Mes Installations And Connected Area At Af Stn Kalaikunda
Tender Value
20 Lakhs
Estimated cost
Bid Submission
05 Feb 2025
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalaikunda → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Certain Misc B/R Repairs In Mes Installations And Connected Area At Af Stn Kalaikunda
BOQ
| Sl. No. | Item Description |
| 1 | M&Lpreparation of old treated surfaces of walls and applying one coat of white wash. |
| 2 | M&Lpreparation of old treated surfaces of ceilings and applying one coat of white wash. |
| 3 | M&Lpreparation of old treated surfaces of walls and applying one coat ofacrylic distemper 1st quality of existing shade |
| 4 | M&Lpreparation of old treated surfaces of steel exceeding 10cm girth or depth and applying one coat of synthetic enamel paint |
| 5 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing downwith water etc |
| 6 | M&L 10mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement as specified. |
| 7 | M&Lrendering 15 mm thick on fair faces of brick or concrete surfaces with cement mortar 1:4 mixed with liquid water proofing compound @ 0.25% by weight of cement or as per manufacturer instruction and finishing the surface even & smooth without using extra cement complete all as specified and as directed.Note:- Liquid water proofing comound shall be measured & paid separately |
| 8 | M&Lrendering 5mm thick in CM 1:3 on ceiling surfaces finished even and smooth without extra cement complete all as specified and as directed |
| 9 | M&Lpreparation of new plastered surfaces and applying three coats of white wash |
| 10 | M&Lpreparation of new plastered ceiling surfaces and applying three coats of white wash |
| 11 | M&Lpreparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkaline resistant primer and 1.5mm thick wall care putty complete all as specified and as directed |
| 12 | Supply only Liquid Waterproofing Compound |
| 13 | Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 14 | S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm, complete all as specifed and as directed. Fixed with 16 guage wire complete all as specified and as directed |
| 15 | S&F 4 mm thick non asbestos fibre cement building boards (designer type) fixed or laid/inserted to timber/GI/Aluminium frame work, complete all as specifed and as directed. |
| 16 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 17 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing downwith water etc |
| 18 | M&Lscreed or bedding layer 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed. |
| 19 | M&LRendering 10mm thick in cement mortar 1:3 finished even and fair on vertical surfaces on walls for fixing of dado / skirting tiles |
| 20 | M&LLight Shade Virified Ceramic tiles 10 (+/- 1) mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 21 | M&LLight Shade Virified Ceramic tiles 10 (+/- 1) mm thick (square/ rectangular) polished, area of each not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 22 | M&L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 23 | M&L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 24 | M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed. |
| 25 | Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 26 | Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 27 | S&Ftubes 15mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed. |
| 28 | S&F tubes 20mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed. |
| 29 | S&F in repairs coloured vitreous China wash basin, white, flat back, size 550 x 400mm including pedestal, waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed andbrackets including cutting for and pinning in ends of brackets or erecting stand etc. completed all as specifiedand directed. |
| 30 | S&Fin repairs 15mm bore fancy type CP Pillar taps fancy type screwed down high pressure, with or without lettered \"Hot\" or cold with long screwed shanks and fly nuts, screwed foriron pipe and fixed complete all as specified and as directed. |
| 31 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass of 5.5mm thick, mounted on 6mm thick AC building board and fixed to wall with wooden plugs with & including chromium plated brass screws and cup washers complete all as specified & as directed. |
| 32 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white/coloured (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. |
| 33 | S&F in repair Plastic water closet seat,(white colour), closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicefor pedestal pan complete all as specified and as directed. |
| 34 | S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern to squatt pattern, completed all as specified and as directed. |
| 35 | S&F in repairs Vitreous China Urinal, Half stall type, white/coloured (excluding flushing cistern, flush pipe and waste pipe)including providing fixing plugs bedding urinal against wall etc all as specified and directed . |
| 36 | S&F grating doom 125 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed. |
| 37 | S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position all as specified and as directed |
| 38 | S&F in repairsPVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valvefloat and handle including brackets complete all a specified and as directed. |
| 39 | S&Fin repairsCP fancy type bip taps 15mm screw down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 40 | S&Fin repairs fancy type CP stop cock/angle cock (concealed type)15mm screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed. |
| 41 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) |
| 42 | S&Fin repairs PVC connections 15mm size withPTMT nuts of length 450mm complete all as specified and as directed. |
| 43 | S&F in repairs high density polyethylene pipe(HDPE), 32 mm dia for WHB or sink complete all as specified and as directed. |
| 44 | S&F in repair Towel rail fancy type cromium plated 20 mm dia decorative fancy D type 60 cmlongall as specified fixed . |
| 45 | S&F in repair Waste coupling 40mm bore of PTMT (half or full threaded) min. weight 40mm-60 gms) . |
| 46 | S&F in repair Waste coupling 32mm bore of PTMT (half or full threaded) suitable for urinals (min. weight 32mm-45gms) |
| 47 | Taking down chowkat or frames exc. 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame) |
| 48 | Taking down chowkat or frames n.exc 1.5 sqm each with shutter (without taking off shutters from the frame) |
| 49 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm including one shop coat of redoxide primer |
| 50 | M&Lproviding cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) for filling of steel door frame complete all as specified and as directed. |
| 51 | S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides |
| 52 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. |
| 53 | S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section. |
| 54 | S&F extruded Aluminium alloy handles 150mm size, cast type, anodised |
| 55 | M&L applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer, complete all as specified and as directed. |
| 56 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, in opening as per specification & drawing |
| 57 | S&F Factory made solid PVC moulded door shutter 28 to 30mm thick (style) with 2, 4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurathane painted on the front face & 2 mm thick plain colour PVC sheet on back face supply & fixing on frame, as per specification & drawing. |
| 58 | S&F stainless steel Butt hinges 100mm size, medium weight, . |
| 59 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, & steel peg stay, complete with glazing bars, dovetailed or welded |
| 60 | S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete |
| 61 | S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames, window guard bars, plain let in & fixed independently in wooden frames L or T section support for shelves etc., & similar articles conforming to Fe 290-0 Gde E-165 |
| 62 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing andfixing new ones |
| 63 | S&F Sheet glass 3.0 mm thick, ordinary quality & glazing with oil putty in square n.exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones |
| 64 | S&F Steel rolling shutters 1.25mm thick, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:gear operated type with bevel gear box and crank handle |
| 65 | Dismantling steel rolling shutters complete including shutter, ball bearing, canopy, side guides, locking arrangement etc, height shall be measured from the bottom of the lintel to the finished floor cill level, width shall be measured inclusive of width of the guide rails |
| 66 | M&Lpreparation of new or previously untreated steel or iron surfaces of any description over 10cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed. |
| 67 | Supply only Safety lever locks mild steel with 4 levers for rolling shutters |
| 68 | Demolition of cement concrete of any description and in any position not otherwise specially privided for (unreinforced) complete all as specified and as directed. |
| 69 | M&L 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate), as in plinth protection etc , finished even and smooth w/o using extra cement complete. |
| 70 | M&L Forming Construction (Dummy joints 50mm deep x 10mm wide, filled with sealing compound of Grade A |
| 71 | M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) finished fair and even without using extra cement as in sub-floors, sub-bases, floors, pavings etc |
| 72 | M&L sand filling under floors or in foundations including watering and consolidation |
| 73 | M&L machine pressed precast concrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M-35 Grade pointed with grey cement and pigment |
| 74 | M&Lproviding precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match 1:2:4 type B1 using 20mm graded stone aggregates |
| 75 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, embedded in concrete |
| 76 | Excavating in post holes (or similar holes) each n.exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil |
| 77 | M&LPCC 1:4:8 type D-2 using 40mm graded stone aggregates as in Cement concrete in foundations, filling and mass concrete |
| 78 | S&F mild Steel Works (Miscellaneous) as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessarydrilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165+A2 |
| 79 | S&F 10 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long |
| 80 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link) |
| 81 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 82 | Supply only Chain link MS galvanisd fencing, any size or type |
AI Tender Summary
Tender Timeline
Jan 14, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 06, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender