|
| 1 | Cat (A) -Items to be supply and fixing |
| 2 | Site clearance in soft / loose soil, clearing away all grass , vegetation , sapling, shrubs and trees n.exc 30 cm girth measured at a height of one metre above ground level and removing rubbish material upto a distance 50 m outside the periphery of the area, roots of trees and saplings shall be removed and the hollows filled up ,complete all as specified and as directed. |
| 3 | Excavating in trenches (soft/Loose soil) n.exc. 1.5m wide and n.exc. 1.5m in depth and getting out, and returning, filling in, including spreading, Leveling, watering and well ramming in layers not exc. 25 cm. |
| 4 | Excavating in trenches(Soft/Loose soil)for Inspection chamber/manhole n. exc. 10 sqm on plan andn. exc. 1.5m in depth & getting out excavated material to a distance n. exc. 50m and deposited where directed. |
| 5 | Material & Labour for, Sand filling under floors or in foundations including watering and consolidation. |
| 6 | Material & Labour for, Cement concrete in foundations,type M-15, 1:2:4 (20mm graded aggregate) |
| 7 | Material & Labour for, providing cement concrete in coping type B-1, 1:2:4 (20mm graded aggregate)including for use of formwork (straight or curved). |
| 8 | Material & Labour for, providing pre cast cement concrete cover slabs (for man holes etc.) Type B1,1:2:4 (20mm graded aggregate) and set in cement mortar 1:6, including for use of formwork,moulds or ma chine moulds. |
| 9 | Material & Labour for, Brick work (Modular bricks) with fly ash bricks, straight or curved on plan built in with 1:4 cement mortor, straight or curved on plan. |
| 10 | Material & Labour for, Half brick thick Brick work (Modular bricks) with fly ash bricks, straight or curved on plan built in with 1:4 cement mortar. |
| 11 | M & L, forRendering 15mm thick cement plastering of 1:4 cement mortar on fair faces of brick work or concrete surfaces and rendering is to befinished even and smooth withou using extra cement. |
| 12 | Supply & Fixing for,8 mm dia.TMTbar cut to length,bent to shape required including cranking, bending etc.and binding with MS wire (annealed) n-less than 0.9mm dia. Make TATA, TISCON, SAIL, JSW,JINDAL. |
| 13 | Boring Horizontal Holes by auguring not exceeding 150mm dia 1m deep for passing water pipe lines across the road of any type. Complete all as specified & directed. |
| 14 | Supply & Fixing for, 100 mm dia medium grade G.I. steel tubes, including for galvanised steel (Gl) tubing with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. Also include for cutting through walls, floors, etc. and their making good. The G.I pipe should fulfill all the specifications of IS code - 1239 |
| 15 | Ditto as per Item No. 13but for 50 mm dia medium grade G.I. steel tubes. |
| 16 | Ditto as per Item No. 13but for 40 mm dia medium grade G.I. steel tubes. |
| 17 | Ditto as per Item No. 13but for 25 mm dia medium grade G.I. steel tubes. |
| 18 | Supply & Fixing 40mm dia Stop valves, cast copper alloy, screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions |
| 19 | Supply & Fixing PPR Gate Valves (Brass Insert) of 100 mm bore. |
| 20 | Supply & Fixing 50mm dia Stop valves, cast copper alloy, screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions |
| 21 | Supply & Fixing 25mm dia Stop valves, cast copper alloy, screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions |
| 22 | Taking up or down steel tubing of 25mm dia. and over and connections. |
| 23 | Material & labour for, applying one coat of black bituminous paint over steel tube exceeding 10cm in width or girth. |
| 24 | Material & labour for preparing plastered surfaces and applying two coat of white washing on new plastered wall surfaces. |
| 25 | Cat (B) - Buy Back Items (ie minus) |
| 26 | Buy-Back (ie minus) Credit to dismantled GI pipe of any size and any weight (size 25 to 100mm). |
