Tender For Tender For The Supply, Installation, Testing And Commissioning Of Exhaust And Fresh Air System And Floor Gratings For Canteen And Cafeteria In Mcc-Pgiosr

Sharing tender

Tender For The Supply, Installation, Testing And Commissioning Of Exhaust And Fresh Air System And Floor Gratings For Canteen And Cafeteria In Mcc-Pgiosr , Canteen Kitchen:Supplying, Fabricating, And Fixing Sinsle Skin Wall Type Exhaust Hood With 1.0Mm Thick Aisi, 304-Grade #4 Finish Jindal Stainless Steel Sheet, With Detachable Battle Filters, Grease Collecting Tray:- Stainless Steel Hood With Oil Collection Channel, Detachable Oil Collection Tray, Channels For Holding The Detachable Baffle Filters. The Hood Should Be Fully Welded Body Construction And Set At An Angle Of 45 Degree In Full Length With The Bottom Of Filters Set In Continuous S.S Channel Etc. Complete In All Respect As Per Standard Specification. The Work Includes All Civil And Connected Electrical Works Like Demolishing, Plastering The Sides And Finishing The Area Neatly, Necessary Supports With 10Mm Gifully Threaded Hanging Rod With Suitable Dash Fastener At Standard Intervals As Per Standard Specification. , For Tandoor Area Of Size 900X900x500mm , For Bio Gas Of Size 1400X900x500mm , Supplying, Fabricating, And Fixing Single Skin Wall Type Exhaust Hood With 1.2Mm Thick Aisi, 304-Grade #4 Finish Jindal Stainless Steel Sheet, With Detachable Split Battle Filters Line On Both Ends Connected To Individual Separate Ducts, Grease Collecting Tray:- Stainless Steel Island Hood With Oil Collection Channel, Detachable Oil Collection Tray, Channels For Holding The Detachable Baffle Filters. The Hood Should Be Fully Welded Body Construction And Set At An Angle Of 45 Degree In Full Length With The Bottom Of Filters Set In Continuous S.S Channel Etc. Complete In All Respect As Per Standard Specification. The Work Includes All Civil And Connected Electrical Works Like Demolishing, Plastering The Sides And Finishing The Area Neatly, Necessary Supports With 10Mm Gi Full Threaded Hanging Rod With Suitable Dash Fastener At Standard Intervals As Per Standard Specification. Blank Profile Shall Be Provided Whereever There Are No Equipments Below The Hood. Island Hood 10630X2250x500 , Exhaust & Fresh Air Fans , Supply, Installation, Testing And Commissioning Of Exhaust Blower Of Abb Model: 500, 5Hp, 1440Rpm, 3 Phase 415V, 100Mm Static Pressure, 7357 Cfm, Note: Separate Arrangements For Dual Ducting For Each Blower Shall Be Provided In The Hood. , Supplying And Fixing Dol Starter Of L&T Make, Relay Range 5 To 8 Amps, Relay Set 7 Amps, Wiring From Starter To Blower With 3 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire In Medium Duty Pvc Conduit With Clamps. , Supplying, Installation, Testing And Commissioning Of Exhaust Fans Of Size Up To 450Mm In The Exhaust Duct, Fixing With Necessary Anchor Bolts / Bolt And Nuts Etc, As Required Including Giving Connections With The Supplied Wire Along With The Exhaust Fan Of Almonardmake 900 Rpm. The Work Includes Wiring With Independent Switch Etc. With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Medium Duty Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable, Modular Switch, Modular Plate, Suitable Gi Box Etc. Complete In All Respect. , Supply, Installation, Testing And Commissioning Of Fresh Air Axial Fan, Abb Make, 2Hp, 1440Rpm,3 Phase 415V, Fad, 6474 Cfm , Supplying And Fixing Dol Starter Of L&T Make, Relay Range 2 To 4.5 Amps, Relay Set 2 Amps, Wiring From Starter To Blower With 3 X 2.5 Sq. Mm + 2 X 2.5 Sq. Mm Earth Wire In Medium Duty Pvc Conduit With Clamps. , Ducting Works , 16.2.2 Supply, Installation, Balancing And Commissioning Of Site Fabricated Gss Sheet Metal Rectangular Ducting Complete With Neoprene Rubber Gaskets, Elbows, Hangers, Supports With 10Mm Gi Full Threaded Hanging Rod With Suitable Dash Fastener At Standard Intervals Etc. As Per Approved Drawings. Site Fabricated Gss Sheet Metal Rectangular Ducting As Per Is 655-2006 For 0.8 Mm Thick. Make: Tata/ Jindal/ Equivalent- The Work Includes All Civil Works Like Demolishing, Plastering The Sides And Finishing The Area Neatly. , 16.13 Gl Volume Control Duct Damper- Supply, Installation, Testing And Commissioning Of Gl Volume Control Duct Damper Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc, As Per Specifications. , Supply And Installation Of Powder Coated Aluminium Air Louvers With Bird Screen As Per The Approved Quality. Exhaust /Fresh Air Louvers- Make: Airmaster /Systemair /Equivalent. , Kitchen Floor Gratings , Supplying, Fabricating And Fixing The Stainless Steel Floor Gratings, Made Out Of Ss304 1.2 Mm Base Trench With 2 Level Multi Filter, Bottom To Be Of Basket Type To Be Fixed By Bolt And Nut Into A 100Mm Ss 304 Pipe Drain Outlet, Secondary Filter To Be Laser Cut Tray Type With 2 Collapsible Handles, Both Ends Sloped Towards To The Drain. Removable Gratings Laser Cut Out Of 2Mm Ss 304 Sheet. Equally Spaced At 20Mm With Half Round Laser Cut Grooves For Anti Slippage. The Work Includes Cutting Of Floor Tile/Kota Stone And Placing The Gratings In Cement Mortar And Finish The Edges Neatly With Matching Colour Pigment Complete In All Respect. 1000X300x75mm , Cafeteria Hood , Supplying, Fabricating, And Fixing Single Skin Wall Type Exhaust Hood With 1.2Mm Thick Aisi, 304-Grade Jindal Stainless Steel Sheet, With Detachable Battle Filters, Grease Collecting Tray:- Stainless Steel Hood With Oil Collection Channel, Detachable Oil Collection Tray, Channels For Holding The Detachable Baffle Filters. The Hood Should Be Fully Welded Body Construction And Set At An Angle Of 45 Degree In Full Length With The Bottom Of Filters Set In Continuous S.S Channel Etc. Complete In All Respect As Per Standard Specification. The Work Includes All Civil And Connected Electrical Works Like Demolishing, Plastering The Sides And Finishing The Area Neatly, Necessary Supports With 10Mm Gi Full Threaded Hanging Rod With Suitable Dash Fastener At Standard Intervals. For Dosa Plate & Chinese Burner Of Size 2900X900x500mm , Supply, Installation, Testing And Commissioning Of Exhaust Air Axial Fan, Abb Make, 2Hp, 1440Rpm, 3 Phase 415V, Fad, 6474 Cfm , Supplying And Fixing 3 Phase Dol Starter Of L&T Make, Relay Range 2 To 4.5 Amps, Relay Set 2 Amps, Wiring From Nearest 4Pol Isolator And Starter To Blower With 3 X 2.5 Sq. Mm + 2 X 2.5 Sq. Mm Earth Wire In Medium Duty Pvc Conduit With Clamps , Supply, Installation, Testing And Commissioning Of Fresh Air Axial Fan Abb Model: 600, 1Hp, 1440Rpm, 3 Phase 415V, Fad, 6474 Cfm , Supplying And Fixing 3 Phase Dol Starter, L&T Make, Relay Range 1 To 2 Amps, Relay Set 2 Amps, Wiring From Nearest 4Pol Isolator And Starter To Blower Will Be Of 2.5 Sq,Mm 4 Core Wire Of Polycab Make, Provided With Necessary Pvc Conduits And Clamps , Ducting Works , 16.2.2 Supply, Installation, Balancing And Commissioning Of Site Fabricated Gss Sheet Metal Rectangular Ducting Complete With Neoprene Rubber Gaskets, Elbows, Hangers, Supports With 10Mm Gi Full Threaded Hanging Rod With Suitable Dash Fastener At Standard Intervalsetc. As Per Approved Drawings. Site Fabricated Gss Sheet Metal Rectangular Ducting As Per Is 655-2006 For 0.8 Mm Thick. Make: Tata/ Jindal/ Equivalent- The Work Includes All Civil Works Like Demolishing, Plastering The Sides And Finishing The Area Neatly. , 16.13_ Gl Volume Control Duct Damper- Supply, Installation, Testing And Commissioning Of Gl Volume Control Duct Damper Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc, As Per Specifications. , Supply And Installation Of Powder Coated Aluminium Air Louvers With Bird Screen As Per The Approved Quality. Exhaust /Fresh Air Louvers- Make: Airmaster/ Systemair/ Equivalent.