Construction Of Gram Panchayat Office Building At Degaon Tal. Mangalwedha
Tender Value
19.67 Lakhs
Estimated cost
Bid Submission
16 Jan 2025
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
degaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Gram Panchayat Office Building At Degaon Tal. Mangalwedha
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth,soil of all types, sand,graval and soft murum, including removing the excavated material up to adistance of 50 m. beyound the building area & stacking & spreding as directed, dewatering,preparing the bed for the foundation and necessary back filling,remming,watering including shoring and strutting etc.coplete(LIFT UP TO 1.5 M.) |
| 2 | Excavation for foundation in hard murum, including removing the excavated material up to adistance of 50 m. beyound the building area & stacking & spreding as directed, dewatering,preparing the bed for the foundation and necessary back filling,remming,watering including shoring and strutting etc.coplete(LIFT UP TO 1.5 M.) |
| 3 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with out SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 5 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC withoutSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed desig ns and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be rovided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. Chajja as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be rovided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumpingcompactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 10 | Providing IIind class Brunt brick masonary with conventional type bricks in CM 1:6 in Foundation and Plinth of inner walls in plinth,external walls in plinth,external walls including striking joints,racking out joints on exposed faces and watering complete. |
| 11 | Providing II nd class Brunt brick masonary with conventional I.S. type bricks in CM 1:6 in Superstucture including striking joints,racking out joints,watering and scaffolding complete. |
| 12 | Providing IInd class Burnt brick masonary with convantional I.S. type bricks in c.m. 1:4 in half brick thick wall including M.S. longitudinal rainforcement of 2 bars of 6mm dia. atevery third cource properly bend and bonded at ends striking joints racking out joints,watering and scaffolding etc. comp.DSR PN/IN25/5Spec. No. Bd G7 PN316 |
| 13 | Providing & fixing in position TMT Steel bar reinforcement of various dia for R.C.C footing,column,beams & lintel,slabs etc. as per detail design & drawing including cutting,bending,hooking & binding with wire, supporting as required etc. complete. |
| 14 | Filling in plinth & floors with excavated murum laying in layers of 15 to 23cm thk. Layer ,watering, compaction etc. |
| 15 | Filling in plinth & floors with Contractors murum laying in layers of 15 to 23cm thk. Layer ,watering, compaction etc. |
| 16 | Providing Internal plaster 12mm thk. In single coat in C.M.1:3 to concrete or brick surface including scaffolding & curing etc. complete. |
| 17 | Providing cement plaster 20mm thk. In two coat in C.M.1:4 to concrete or brick surface including scaffolding & curing etc. complete. |
| 18 | Providing & applying two coats of Washable oildistemper to new plastered surface including scaffolding & preparing surface by brooming & brushingetc. complete. |
| 19 | Providing & applying two coats of waterproof cement paint to new plastered surface including scaffolding & preparing surface by brooming & brushing, watering for two daysetc. complete. |
| 20 | Providing sills of polished kadappa stone25mm to 30 mm thick on a bed of 1:4 cement mortar including cement float, filling joints with slurry,curing polishing cleaning complete.DSR PN/IN 44/7 B)spec.No. Bd M 29 PN.391 |
| 21 | Providing and laying Antiskid Ceramic tiles ofapproved qualityof company RAK / KajariaNitco / Asian or equivalent make of size 30 cm x30 cm and confirming to IS 15622-2006 (Group-BIIA) for antiskid flooring in required position laid ona bed of 1:4 cement mortar including cement float,filling joint with cement slurry cleaning curingcomplete. **Spec. No.: Bd. M-12 |
| 22 | providing and laying ceramic tiles of approved quality 30cmX30cmX5mm for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white /clour cement slurry cleaning curing comp. DSR PN/IN /47/20 spec.No Bd M P.No.386 |
| 23 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. 33.4 |
| 24 | Providing and laying green marble of 18 to 20 mm thick for doorFrame/dado/window boxing etc. C.M 1:6 Including filling joints with polymer base filler nosing the sharp edges wherever necessary curing etc complete. DSR PN/IN 48/20 Spec.No Bd M 12 |
| 25 | Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with / without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. (without door frame) .(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter. 51.6 |
| 26 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting withone coat of anticorrosive paint and two coats of oil painting complete40.02 |
| 27 | Providing & fixing steel Ventilator Fully Glazed of various sizes as per drawing withoutwithout ventilatorand wirhout hot dip zink coatingincluding fabricating glazing with plain obcured glass pane and approved type and quality and fixtures and fastening with guard bars 12mm square 10cm ctoc oil painting with primer coat as directed (including MS guard bars of 12 mm dia at 10 Cm c/c and MS flat of 40X6mm) |
| 28 | Providing and fixing Orisatype white glazed earthenware 575mm water closet pan including \"S\" trap with fot rests , cast iorn soil and vent pipe upto out side face of wall 1:2:4 brick bat lime concrete and its accessories etc. complete. |
| 29 | Providing and fixing white glazed earthenware sink 450mm x 200mm x 300mm including all connection of the G.I. supply and lead waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete 41.76 |
| 30 | providing and fixing 10cm PVC Nehani Trap including grating etc com DSR PN/IN 109/44 As directed by engineer in charge 42.67 |
| 31 | Providing & fixing 15 mm dia screw down stop tap of brass including necessary scokets union nut etc. |
| 32 | Providing & laying in trenches 15 mm dia C.P.V.C Pipe with screwed sockets joints necessaryfittings such as sockets back nuts elbows bends tees reducers enlarges plugs clamps including necessary drilling holes in walls slab &remarking good the demolished portion to restore the same in original condation neatly & applying anticorrosive primer oil paint & two coats of oil painting etc 42.55 |
| 33 | Providing & laying in trenches 20 mm dia C.P.V.C Pipe with screwed sockets joints necessaryfittings such as sockets back nuts elbows bends tees reducers enlarges plugs clamps including necessary drilling holes in walls slab &remarking good the demolished portion to restore the same in original condation neatly & applying anticorrosive primer oil paint & two coats of oil painting etc 42.56 |
| 34 | Providing soak pit of size 120 cm x 120 cm x 120 cm including excavating & filling with brick bats etc.DSR PN/IN 122/103 Sepc.No. BD V 46Page No. 573 |
| 35 | Providing and fixing100mmdia stabiliser pipe/P.V.C.soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions,slotted vent,clampsetc.complete. 42.52 |
| 36 | Providing and fixing board displaying information,such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including excavation, refilling, transportation, and labour etc complete Spec. No. As directed by Engineer in Charge |
| 37 | Quality Control Charges |
| 38 | Royalty Chargesof sand |
| 39 | Royalty Charges other material |
| 40 | GST 18% |
| 41 | GST 18% |
AI Tender Summary
Tender Timeline
Jan 10, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 16, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender