|
| 1 | Scraping white wash/colour wash. [CSR Item No. 8.31 (a)] |
| 2 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wallputty by applying two or more coats to get required finish. (CSR item no. 16.65) |
| 3 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. (CSR Item No. 16.10) |
| 4 | Finishing walls with eement based water soluble exterior paint such as snowcem,robbiacemetc. Two or more coats to give an even shade.(CSR Item No. 16.13) |
| 5 | White washing (two or more coat)(CSR item no. 16.2) |
| 6 | Applying pink primer or aluminum priming coat onwoodwork including preparationof surface knotting and stopping etc. (CSR item no. 16.16) |
| 7 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.(CSR item no. 16.17) |
| 8 | Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).(CSR item no. 31.11) |
| 9 | Providing and laying of LDPE (Low density polythene sheets) over roofing before laying of roof tiles, having thicknees of 200 micron including cutting, jointing,(Heat seal joiniting with hot iron) and overlapping of minimum 150 mm ans CC Gola 75 mm vide, complete in all respects to the satisfication/approval of Engineer-in-charge. (AOR) |
| 10 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.(CSR item No. 13.55) |
| 11 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:1. (CSR item No. 13.45) |
| 12 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (CSR item no. 13.74) |
| 13 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.(a) UPVC 110 mm bend [CSR item no. 13.75 (a)] |
| 14 | Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead.c) with cement mortar 1:4 taking are 2.5 sqm(As per CSR item No. 31.1) |
| 15 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level(As per CSR item No. 11.4 (i)) |
| 16 | 12.5 mm thick cement plaster 1:5(CSR Item no.15.10) |
| 17 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. (CSR Item no. 16.20) |
| 18 | Renewing glass panes with putty and nails wherever necessary (b) Glass panes weighing 10.75 Kg/sqm(CSR item no. 31.5 (b)] |
| 19 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (CSR item no. 16.18) |
| 20 | Renewing glass panes with wooden fillets wherever necessary(b) Glass panes weighing 10.75 Kg/sqm[CSR Item No. 31.6 (b)] |
| 21 | Providing and fixing ply-wood (4mm) ceiling (CSR item no. 13.61) |
