|
| 1 | Demolition of brick work or stone masonry built in cement mortor including all quoins aches pillar etc. but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed. |
| 2 | Demolition of cement concrete (un-reinforced) in any position i.e. floors and pavingsetc. not exc 15cm thick below or above GL), complete all as specified and directed. |
| 3 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 4 | All as per serial item No 3.00 here-in-before but except bricks, complete all as specified and directed. |
| 5 | M&L for half brick work with sub class \"B\" brick straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed. |
| 6 | M&L for wallingof random rubblemasonrybuilt in cement motar 1:6, uncoursed, wellbounded, bedded and solidly hearted complete, complete all as specified and directed. |
| 7 | All as per serial item No. 6.00 here in before but except stones complete all as specified and as directed. |
| 8 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out jopints, hacking for key, scrubbing down with water complete all as specified. |
| 9 | M&L for 15mm thick rendering in CM 1:4 on fair faces or brick / concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | S&F PVC (SWR) pipe 110mm dia single socket in any length with rubber ring joints fixed to wall / floor including PVC clamps complete all as specified and as directed. |
| 11 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in coping, kneelers, bed block including necessary from work complete all as specified and as directed. |
| 12 | M&L forpreparing new plastered surfaces of wallsand applying two coats of cement base paint over a coat ofprimer complete all as specified and as directed. |
| 13 | M&L for preparation of new surfaces and applying two coats ofsynthetic enamel paint onsteel surface over one coat of priming with red oxide, zinc chrome of any description over 10 cm in width or girth, not other wise described complete all as specified and as directed. |
| 14 | M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(AS camoflage Painting multicoloured. |
| 15 | M&L for plain cement concrete type D-2 (1:4:8) using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed. |
| 16 | M&L for PCC 1:2:4, B-1 (20mm graded crushed stone aggregate) as in surface channels and drains etc, complete all as specified and directed. |
| 17 | Dismantling of wrought iron or mild steel workof any decription not otherwise provided for, complete all as specified and as directed. |
| 18 | M&L for mild steel work as in posts & struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc & similar work convirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 19 | S&F Galvanshied 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, stapples or steel pins, etc as directed (each line wire to be measured) |
| 20 | S&F in replacement concertina coil, punched type (including spike and handle) with 50/51 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electrogalvanized to provide protection against outdoor exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips connect the individual turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9 KG (+/- 5%) without packing material and coil length 7 to 8 mtr when opened up. Each coil wound with bituminized Hession cloth for providing protective coating, complete all as specified and directed. |
| 21 | Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work hung asgates, including pintle hinges, stops,hand-made sliding bolts,and ornamental and intricate design etc conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 22 | M&L for ild steel work in Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete fastening and fixing complete FE -410 Gde E-250 complete all as specified and as directed. |
| 23 | M&L for mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 24 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 as in floors complete all as specified and as directed. |
| 25 | M&L for Machine pressed coloured concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigmentcomplete all as specified and directed. |
| 26 | M&L for 25mm thick Sand cushioning /filling under floors or complete all as specified & directed by Engr-in-Charge. |
| 27 | M&L forfactory made coloured glossy finish chequered cement concrete tile size30cmx 30cm x 25mm thickmachine pressed set & jointed in neat cement slurry asin floorsjoint fill up with white grey cement & pigmentsover and including 15mm thick screed bed in CM 1:4 all as specified & directed. |
| 28 | Providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb stone and similar work, bedded and jointed in CM 1:6 complete all as specified and as directed. |
| 29 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as per specified. |
| 30 | M&L for RCC (Design Mix) M-25 grade as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 31 | M&L for RCC (Design Mix) M-25 grade as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directedlaid/made to slope as in RCC roof surfaces complete all as specified and as directed. |
| 32 | M&L for RCC M-25 grade as in Columns, pillars, piers,posts and struts complete all as specified and as directed. |
| 33 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter in rough finished surafces complete all as specified and as directed. |
| 34 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) in rough finished surafces complete all as specified and as directed. |
| 35 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide in rough finished surafces complete all as specified and as directed. |
| 36 | M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required, including cranking bending, spirally for hooping for columns, hooking ends and binding with and including MS wire annealed not less than 0.90 mm dia or securing with clips complete all as specific and directed. |
| 37 | M&L for mild steel bars TMT 6mm to 8 mmdia as in reinforcement , cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specific and directed. |
| 38 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil complete all as per specified. |
| 39 | M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation for fencing post filling, and mass concrete, complete all as specified and directed. |
| 40 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed. |
| 41 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire only complete all as specified and as directed. |
| 42 | M&L for Holes drilled up to 12mm dia (and countersunk, if required) depth of holes exc 3mm but nexc 12mm complete all as specified and as directed. |
| 43 | Providing precast cement concrete louvers and jallies, 50 mm thick ( measured solid) including all mouldings but excluding frametype B-0 1:2:4 ( 12.5 mm graded crushed stone aggregate) set in CM 1:4 complete all as specified and as directed. |
| 44 | M&L for 18/19mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive complete all as specified and as directed. |
| 45 | Hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, complete all as specified and as directed. |
| 46 | Dismantling of CGI/AC/ any otherssheet of any description incl ridges etc complete all as specified and as directed. |
| 47 | S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet of thickness 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding/view cutter to wall fixed with selftapping screws complete all as specified and as directed. |
| 48 | M&L for granite (of any tpe),18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 49 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
