Tender For Construction Of 01 No. 33 Kv M/S K.L. Concast Pvt. Ltd. Solar Bay At 220 Kv S/S Pahari Distt. Chitrakoot. (Pr No. 1300059088/2025)
Tender Value
2.99 Lakhs
Estimated cost
Bid Submission
23 Jan 2025
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pahari → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 01 No. 33 Kv M/S K.L. Concast Pvt. Ltd. Solar Bay At 220 Kv S/S Pahari Distt. Chitrakoot. (Pr No. 1300059088/2025)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary rock (Code No. 2.7.1) |
| 2 | Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. (Code No. 2.27) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)(Code No. 4.1.10) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Code No. 5.1.2) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete (Code No. 5.9.1) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (Code No. 5.9.2) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (Code No. 5.22.6) |
| 8 | Supply of 28 mm. dia M.S. Anchor bolts (conforming to IS 266)900 mm. long with base plate (75x75x6mm) welded with anchor boltsincluding its threading upto a length of 10cm. and also supplyof a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work (Code No. 9.12) |
| 9 | Fixing and grouting28 mm and above dia bolts in properalignment level and setout with help of a template completeincluding supply of all labour & T&P etc. required for propercompletion of the work.(labour rates only) . (Code No. 9.13) |
| 10 | Fixing of template in position level and alignment for groutingof Anchor bolt in main gantry (labour rate only). (Code No. 9.31) |
| 11 | Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. (Code No. 11.18) |
| 12 | 40 mm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work but for without base NSI (CSI No. 12.28) |
| 13 | 12 mm cement plaster of mix, 1:4 (1 cement: 4 fine sand) (Code No. 13.1.1) |
| 14 | Neat cement punning. (Code No.13.18) |
AI Tender Summary
Tender Timeline
Jan 10, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 23, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 24, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender