|
| 1 | Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.300 kg. per square metres on the prepared bitumenous /granuler surface cleaned with mechanical broom. (as per MORTH Specification - 503) |
| 2 | Providing and laying semi-dense bituminous concrete with 60-90 TPH batch type HMP producing an average output of 25 cum per hours using crushed aggregate of specified grading, premixed with bituminous binder (VG-30) @ 5.00 percent of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H Specifications Clause 508 complete in all respects. (Reducing Bituminious quality by 8% and replacing it by plastic waste as per IRC:SP:98-2013) |
| 3 | Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. DSR 2023/16.62 |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. DSR 2023/13.99 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023/6.1.1 |
| 6 | 12 mm thick plaster of Mix 1:4 (1 cement : 4coarse sand) DSR 2023/ 13.4.1 |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).DSR 2023/13.111.1 |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)DSR 2023/4.1.3 |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)DSR 2023/5.1.2 |
| 11 | Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (whenf not included in overall rate) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & overlaping & hooks. analysis rate |
| 12 | Engagement of Sweeper with broom full time to clean/removal of malva etc all compelte |
| 13 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube.DSR 2023/10.26.1 |
| 14 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(as per Clause 406) (LDA SOR RSN-6) |
| 15 | Providing and fixing PVC Pipe 160 mm dia. |
| 16 | PVC pipe 110 mm |
| 17 | Engagement of labour to cutting tree brenchs etc all complete |
