|
| 1 | Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified an as directed. |
| 2 | Fixing only (Except sheeting) 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275fixed with L-type or J-type or cranked hook bolts with bitumen washer / screwsin normal/nainital pattern complete all as specified and directed. |
| 3 | Fixing only (Except sheeting) Plain, galvanised, 0.63mmmild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws in normal/nainital pattern Completeall as specified and directed. |
| 4 | Dismantling laid dry or laid dry and pointed Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed. |
| 5 | M & L for machine cut Kota stone slab flooring 20-25mm thick over and including cement screed base 20mm thick in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 6 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick screed bed in cement mortar 1:3, laid and jointed with ith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | Dismantling of boarding , any description fixed in any position with screws complete all as specified and directed. |
| 8 | M&L for 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading to all sides fixed in repair complete all as specified and directed. |
| 9 | S&F for 2nd class hardwood 40 mm boarding plain one side with butt joint fixed with nails in any situation, complete all as specified and directed. |
| 10 | S&F for 2nd class hardwood 25 mmboarding plain one side with butt joint fixed with nails in any situation, complete all as specified and directed. |
| 11 | Dismantling timber scantlings 40sqcm and over in section, in frame work complete all as specified and directed . |
| 12 | M&L for Timber framed andfixed second class hard wood clean sawn second class hard wood in scantlings completeall as specified and directed. |
| 13 | Taking down window chowkhats or frames area n. exc 1.5 Sqm each with shutter (without taking off shutter from frame), complete all as specified and as directed. |
| 14 | Taking down Shutters of any description exc 1.00 sq. m but not exc 2.00 sqm each complete all as specified and as directed. |
| 15 | Taking down chowkhats or frames area exc 1.5 Sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and as directed. |
| 16 | S & F 2nd class Hard Wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, And making good with existing surface as complete as specified and directed. |
| 17 | S&F 35 mm thick Glazed and skeleton shutters 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 18 | S&F 30 mm thick 2nd class hard wood glazed and skelton window and ventilators shutters open rebated and prepaired to received glass gauge etc diveded intosquare with sash bar edges of framing plain chamfered or rounded fitted with cut and mittered beads for sequringglass gauge etc , size of members of shutters as specified in MES SSR -I section 8 clause 8.24 (b) complete all as spcified and directed |
| 19 | S&F 30 mm thick 2nd class hard woodFlush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 20 | S & F Plain, framed, panelled shutters 35 mm thick in 2nd class hard wood (any number ofpanels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed. |
| 21 | S & F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 22 | M & L for preparation of new or previously untreated wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 23 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 24 | S&F sheet glass ordinary quality & glazing with wooden bead/oil puttyin Square n.exc 0.5 Sqm in each pane 5.5 mm thick complete all as per specified and directed. |
| 25 | S&F sheet glass ordinary quality & glazing with wooden bead/oil puttyin Square n.exc 0.5 Sqm in each pane 3 mm thick complete all as per specified and directed. |
| 26 | S & F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples,complete all as specified and directed. |
| 27 | S & F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples,complete all as specified and directed. |
| 28 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 29 | S & F in repairs 20mm dia Aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified. |
| 30 | S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long complete all as directed. |
| 31 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 32 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 33 | S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends, tees,short pieces,connectors, elbows, reducers, union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed. |
| 34 | S&F GI water tubing of 20 mm dia, medium grade conforming to IS-1239(Part -1) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union dockets etc & fixed to walls, ceilings, & laid on floors complete all as specified and directed. |
| 35 | Cutting chases, forwater tubing or concealed, etc. and making good to facings where required and plastering in cement mortar (1:4)cutting not exceeding 10cm girth in Stone, concrete block or slab walls, complete all as specified and directed. |
| 36 | S & F in repair Bib tap 15mmcast copper alloy, bright, crutch or butter fly handle screwed down, fancy type chromium plated for iron pipes complete all as specified and directed. |
| 37 | S & F in repair 15mm stop valve / angle valve, cast copper alloy screwed down high pressure with crutch or butter fly handle of fancy type chromium plated screwed both ends of,complete all as specified and directed. |
| 38 | S&F in repair, PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed. |
| 39 | Dismatling & Disconnecting existing PVC tankExc 500 Ltr and n. exc 1000Ltr. complete all as specified and directed. |
| 40 | S & F 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 41 | S&F in repairs Gun Metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as directed. |
| 42 | S&F vitreous china wash hand basin white flat back, size 550x400mm excluding taps , waste but including brackets as in repair, complete all as specified and directed. |
| 43 | S & F in repairs 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 44 | S&F in repairs vitreous China squatting pan, \"Orrissa\" pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in cement concrete bedding 1:2:4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed. |
| 45 | S&F as in repair 10 ltr capacityPVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed. |
| 46 | Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed. |
| 47 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed. |
| 48 | S & F 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. . |
| 49 | S & F 100mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. . |
| 50 | S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 75mm complete all as specified and directed. |
| 51 | S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 100mm complete all as specified and directed. |
| 52 | S & F 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed. |
| 53 | S & F 100mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed. |
| 54 | S & F 300 mm long (Length of bolt) mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate complete all specified and directed. |
| 55 | S & F 75mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor, in repairs complete all as specified and as directed. |
| 56 | S & F 110mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor, in repairs complete all as specified and as directed. |
| 57 | S & F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 58 | S & F 110mm dia PVC cowls complete all as specified and as directed. |
| 59 | S & F PVC (SWR) branch Piece single (Double \"Y\") equal or unequal dia 110mm complete all as specified and directed. |
| 60 | S&F 8mm thick wooden tile pieces of size as per existing flooring, machine pressed, one side decorative laminated and other side balancing green, as in parquet flooring with and including necessary padding of soft wool graded type as required at site, fixed with adhesive as per manufacturer\"s instructions including taking down old wooden flooring with or without plywood complete all as specified and directed. Make :- action TESA/ equivalent in century/duro |
| 61 | M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair complete all as specified and directed. |
| 62 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed. |
| 63 | S & F in repairs 8mm thick decorative PVC Sheet hollow (design as approved by GE) for insulation and acoustic purpose on wall surface and fixing at site on PVC framewith rawl plug & screws and adhesive for extra fixing strength as required (IS : 5318) complete all as specified and directed. Make:- Sintex/Rajshree or equivalent as approved by GE. |
| 64 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed by Engr-in-charge. |
| 65 | M&L for 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work as in wall linning complete all as specified and directed. |
| 66 | S&F 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed |
| 67 | M&L for Second class hardwoodPlain fillets of sectional area exc. 3 sqcm but not exc. 6 sqcm square, rectangular or triangular in section, clean sawn, but bull nosed, splayed, chamfered or rounded on one edge or face secured with screws as in frame work complete all as specified and directed. |
| 68 | M&L for preparing of old plastered or unplastered surfces of wall surfaces including complete removal of existing treatment andapplying two coat of distemper oil emulsion over a coat of primer (Priming the plastered and other surface preparatory to distempering) complete all as specified and directed. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours complete all as specified and directed. |
| 69 | M&L for preparing old plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coats of cement base paint over a coat of primer (Priming the plastered and other surface with alkali resistant priming paint) complete all as specified and directed. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours complete all as specified and directed. |
| 70 | Material & Labour for preparation of old or previously treated wooden surfaces of any described, not otherwise describedover 10cm width or girth and applying one coat ofsynthetic enamel paint complete all as specified and directed. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours complete all as specified and directed. |
| 71 | Material & Labour for preparation of old or previously treated steel surfaces of any description, not otherwise description- bed over 10cm width or girth and applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 72 | Material & labour for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasyspots and applying one coat of white wash complate all as specified and directed.The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours complete all as specified and directed. |
| 73 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.and removing rubbish to a disance not exc 250m. complete all as specified and directed. |
| 74 | M & L for 15mm thick in cement mortar 1:6, surface finishedeven & smooth with thin layer of sagol over a dubbing out average 10mm thick on irregular face of walls, complete all as specified. |
| 75 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement complete all as specified and directed. |
| 76 | M&L for preparing of old plastered ceiling surfaces and applying two coat of white wash complete all as specified and directed. |
| 77 | M&L for preparing newly plastered wall surfaces andapplying two coat of distemper oil emulsion over a coat of primer (Priming the plastered and other surface preparatory to distempering) complete all as specified and directed. |
| 78 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 79 | M & L Glazed ceramic coloured tiles in vertical surface of size 450x600mm 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 etc.complete all as directed. |
| 80 | M & L 15mm thick screed bed in cement mortar 1:6 under floor tiles, all as specified and directed |
| 81 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as directed. |
| 82 | M&L for Glazed ceramic colouredtiles (200x200mm) 7-8mm thick,in vertical surface / skirting etc set and jointed in neat cement slurry and pointed in white or coloure cement to match with floor and 10 mm thick rendering or bedding laying of wall finishing with cement mortar 1:4 including dismantling of wall tiling complete all as specified and directed. |
| 83 | S&F in repairs, Stainless Steel Wall Mounted magnet Door Stopper of size7.50 x 3 cm (Dia), all as specified and directed |
| 84 | S&F in repair single piece rimless water closet with P or S trap EWC white/ ivory/off whiteclosed pattern with soft close seat cover and including all necessary accessories like rag bolts/ gel gasket etc. complete in all respect all as specified and directed by engineer in charge. Make : Jaguar SKU No. BSWJAQONSWHT10853S300UFSM/ equivalent in Hindware/Ceara/Kohler |
| 85 | S&F Aluminium (Extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, fixed in repair complete all as specified and directed |
