Housing Urban and Rular Development Local Bodies Closing in 0 days TDR #47132667

Tender For Construction Of Computer Lab Building At Nallagudalahalli P.U.M School H/O Nallagudalahalli

Issued by Local Bodies · Dharmapuri, Tamil Nadu
Tender Value
17.50 Lakhs
Estimated cost
Bid Submission
24 Jan 2025
0 days left
EMD
17500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Construction Of Computer Lab Building At Nallagudalahalli P.U.M School H/O Nallagudalahalli; 2 EARTHWORK EXCAVATION for foundation in all soils and sub solis and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavater earth in layers of not more than 15cm thic, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with intial lead and lift etc. complete. 3 b) Front Column 4 Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete. 5 Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standared specifications and as directed 6 Brick work in CM 1:5 mix using country bricks ground moulded of size 22 X 11 X 7cm for the following including curing etc., complete complying with standard specifications. 7 Supplying and erecting centering for sides and soffits including necessary supports and strutting upto3.29 M height for plane surfacesin all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 gauge stiffened,welded with Steel angle 8 a) Column main, LL Beam, Roof Beam, Roof Slab-Ceiling, Bottom 9 Cement concrete 1:1.5:3using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs 10 Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the desingn given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. 11 Supplying and applying of two coats of Putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. Wall putty, Labour charges for Grinding the joints and sand papering, Labour charges for two coats of putty, Labour charges for scraping the putty area to level the suface smooth. 12 Plastering with CM 1:5, 12mm thick. In all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. 13 Finishing the top of roof with one course of machine pressed tiles of size 20 x 20x 20 cm of approved quality laid in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick. With water proofingcompound conforming to IS at 2% by weight of cement used & the joint Pointed neatly to full depth 14 Paving the floor with kota stone slab of size600 x 600 of 18/20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement and three M.sand) 20 mm thickand pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire changes for polishing machine and power consumption charges etc. The kpta stone slabs and other materials to be used shall be got approved by the Exective Engineer 15 Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1:2:4 mix using 10-12mm ISS HBG metal and top rubed smooth etc., complete complying with standard specification as directed. 16 Distembering two coats using best approved Interiar oil destember with one coat primer over New plastered surface including cost and conveyance of materials and labour charges etc., complete 17 Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc., complete. Schedule ItemNo.359-B) 18 Black Board Paint Two Coats with Approved Cement Paint over Cement Plastered surface including cost and conveyance of materials and labour charges ect., complete. 19 Painting two coats over New iron Works using best quality of enamel paint including cost and conveyance of materials and labour charges etc., complete. 20 Supply and Cost of Steel door, Window, Ventilatora.Door D (1.20X2.10m) 21 b.Windows (1.20X1.50m) 22 Provision for Electrification arrangementsa.Light & Fan Point SD.no.23 23 b.Supply & Fixing of Tube Light SD.no.83 24 CFL SD.no.80 25 Supply & Fixing of Street light SD.no.94 26 Supply & Fixing of Fan SD.no.110 27 Power Plug Point SD.no.39 28 Service Connection SD.no.68 29 Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends & clamps etc., 30 Provision for RWH including Pipes & specials etc., all complete 31 CONSTRUCTION OF CHAPPL RACK OUTSIDE THE CLASS a) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. 32 b) Plastering with CM 1:5, 12mm thick. In all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. 33 c) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete 34 d) Providing cuddapah slab 38 to 44mm for shelfs etc., all complete 35 e) Labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete 36 Providing Cupboard for Teacher a) Brick work in CM 1:5 mix using country bricks ground moulded of size 23 X 11 X 7cum including cost conveyance of all materials to site ect., complete 37 b) Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyances of all materials to site and all labour charges etc 38 c) Providing cuddapah slabs 20/30mm thick including etc., 39 d) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete 40 e) Providing Cup Board Shutter with frame using water Proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter (SI.No124) 41 f) Provision for Lock & Key 42 Providing Cupboard for Students a) Brickwork in c.m 1:5 mix using country bricks ground moulded of size 23x11x7cum including cost conveyance of all materials to site ect complete 43 b) Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyances of all materials to site and all labour charges etc 44 c) Providing cuddapah slabs 20/30mm thick including etc., 45 d) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete 46 Providing bala painting 47 Provision towards Name Board & Logo Board 48 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}

BOQ

Name of Work:
Sl. No. Item Description
1Construction of Computer Lab Building @ Nallagudalahalli P.U.M School H/o Nallagudalahalli
2EARTHWORK EXCAVATION for foundation in all soils and sub solis and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavater earth in layers of not more than 15cm thic, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with intial lead and lift etc. complete.
3b) Front Column
4Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.
5Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standared specifications and as directed
6Brick work in CM 1:5 mix using country bricks ground moulded of size 22 X 11 X 7cm for the following including curing etc., complete complying with standard specifications.
7Supplying and erecting centering for sides and soffits including necessary supports and strutting upto3.29 M height for plane surfacesin all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 gauge stiffened,welded with Steel angle
8a) Column main, LL Beam, Roof Beam, Roof Slab-Ceiling, Bottom
9Cement concrete 1:1.5:3using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs
10Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the desingn given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.
11Supplying and applying of two coats of Putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. Wall putty, Labour charges for Grinding the joints and sand papering, Labour charges for two coats of putty, Labour charges for scraping the putty area to level the suface smooth.
12Plastering with CM 1:5, 12mm thick. In all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.
13Finishing the top of roof with one course of machine pressed tiles of size 20 x 20x 20 cm of approved quality laid in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick. With water proofingcompound conforming to IS at 2% by weight of cement used & the joint Pointed neatly to full depth
14Paving the floor with kota stone slab of size600 x 600 of 18/20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement and three M.sand) 20 mm thickand pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire changes for polishing machine and power consumption charges etc. The kpta stone slabs and other materials to be used shall be got approved by the Exective Engineer
15Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1:2:4 mix using 10-12mm ISS HBG metal and top rubed smooth etc., complete complying with standard specification as directed.
16Distembering two coats using best approved Interiar oil destember with one coat primer over New plastered surface including cost and conveyance of materials and labour charges etc., complete
17Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc., complete. Schedule ItemNo.359-B)
18Black Board Paint Two Coats with Approved Cement Paint over Cement Plastered surface including cost and conveyance of materials and labour charges ect., complete.
19Painting two coats over New iron Works using best quality of enamel paint including cost and conveyance of materials and labour charges etc., complete.
20Supply and Cost of Steel door, Window, Ventilatora.Door D (1.20X2.10m)
21b.Windows (1.20X1.50m)
22Provision for Electrification arrangementsa.Light & Fan Point SD.no.23
23b.Supply & Fixing of Tube Light SD.no.83
24CFL SD.no.80
25Supply & Fixing of Street light SD.no.94
26Supply & Fixing of Fan SD.no.110
27Power Plug Point SD.no.39
28Service Connection SD.no.68
29Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends & clamps etc.,
30Provision for RWH including Pipes & specials etc., all complete
31CONSTRUCTION OF CHAPPL RACK OUTSIDE THE CLASS a) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.
32b) Plastering with CM 1:5, 12mm thick. In all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.
33c) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete
34d) Providing cuddapah slab 38 to 44mm for shelfs etc., all complete
35e) Labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete
36Providing Cupboard for Teacher a) Brick work in CM 1:5 mix using country bricks ground moulded of size 23 X 11 X 7cum including cost conveyance of all materials to site ect., complete
37b) Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyances of all materials to site and all labour charges etc
38c) Providing cuddapah slabs 20/30mm thick including etc.,
39d) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete
40e) Providing Cup Board Shutter with frame using water Proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter (SI.No124)
41f) Provision for Lock & Key
42Providing Cupboard for Students a) Brickwork in c.m 1:5 mix using country bricks ground moulded of size 23x11x7cum including cost conveyance of all materials to site ect complete
43b) Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyances of all materials to site and all labour charges etc
44c) Providing cuddapah slabs 20/30mm thick including etc.,
45d) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete
46Providing bala painting
47Provision towards Name Board & Logo Board
48GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package}

AI Tender Summary

OUR REF NO 47132667
AUTHORITY Local Bodies
TENDER VALUE 17.50 Lakhs
LAST DATE 24-01-2025
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender For Construction Of Computer Lab Building At Nallagudalahalli P.U.M School H/O Nallagudalahalli; 2 EARTHWORK EXCAVATION for foundation in all soils and sub solis and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavater earth in layers of not more than 15cm thic, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with intial lead and lift etc. complete. 3 b) Front Column 4 Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete. 5 Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standared specifications and as directed 6 Brick work in CM 1:5 mix using country bricks ground moulded of size 22 X 11 X 7cm for the following including curing etc., complete complying with standard specifications. 7 Supplying and erecting centering for sides and soffits including necessary supports and strutting upto3.29 M height for plane surfacesin all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 gauge stiffened,welded with Steel angle 8 a) Column main, LL Beam, Roof Beam, Roof Slab-Ceiling, Bottom 9 Cement concrete 1:1.5:3using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs 10 Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the desingn given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. 11 Supplying and applying of two coats of Putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. Wall putty, Labour charges for Grinding the joints and sand papering, Labour charges for two coats of putty, Labour charges for scraping the putty area to level the suface smooth. 12 Plastering with CM 1:5, 12mm thick. In all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. 13 Finishing the top of roof with one course of machine pressed tiles of size 20 x 20x 20 cm of approved quality laid in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick. With water proofingcompound conforming to IS at 2% by weight of cement used & the joint Pointed neatly to full depth 14 Paving the floor with kota stone slab of size600 x 600 of 18/20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement and three M.sand) 20 mm thickand pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire changes for polishing machine and power consumption charges etc. The kpta stone slabs and other materials to be used shall be got approved by the Exective Engineer 15 Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1:2:4 mix using 10-12mm ISS HBG metal and top rubed smooth etc., complete complying with standard specification as directed. 16 Distembering two coats using best approved Interiar oil destember with one coat primer over New plastered surface including cost and conveyance of materials and labour charges etc., complete 17 Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc., complete. Schedule ItemNo.359-B) 18 Black Board Paint Two Coats with Approved Cement Paint over Cement Plastered surface including cost and conveyance of materials and labour charges ect., complete. 19 Painting two coats over New iron Works using best quality of enamel paint including cost and conveyance of materials and labour charges etc., complete. 20 Supply and Cost of Steel door, Window, Ventilatora.Door D (1.20X2.10m) 21 b.Windows (1.20X1.50m) 22 Provision for Electrification arrangementsa.Light & Fan Point SD.no.23 23 b.Supply & Fixing of Tube Light SD.no.83 24 CFL SD.no.80 25 Supply & Fixing of Street light SD.no.94 26 Supply & Fixing of Fan SD.no.110 27 Power Plug Point SD.no.39 28 Service Connection SD.no.68 29 Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends & clamps etc., 30 Provision for RWH including Pipes & specials etc., all complete 31 CONSTRUCTION OF CHAPPL RACK OUTSIDE THE CLASS a) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. 32 b) Plastering with CM 1:5, 12mm thick. In all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. 33 c) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete 34 d) Providing cuddapah slab 38 to 44mm for shelfs etc., all complete 35 e) Labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete 36 Providing Cupboard for Teacher a) Brick work in CM 1:5 mix using country bricks ground moulded of size 23 X 11 X 7cum including cost conveyance of all materials to site ect., complete 37 b) Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyances of all materials to site and all labour charges etc 38 c) Providing cuddapah slabs 20/30mm thick including etc., 39 d) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete 40 e) Providing Cup Board Shutter with frame using water Proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter (SI.No124) 41 f) Provision for Lock & Key 42 Providing Cupboard for Students a) Brickwork in c.m 1:5 mix using country bricks ground moulded of size 23x11x7cum including cost conveyance of all materials to site ect complete 43 b) Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyances of all materials to site and all labour charges etc 44 c) Providing cuddapah slabs 20/30mm thick including etc., 45 d) Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc., complete 46 Providing bala painting 47 Provision towards Name Board & Logo Board 48 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}
Basic Detail
Tender No TN04-2/ Nabard Computer Lab -2024-25 - Kadathur Block-P02
Bidding Type Tender
Location
City Dharmapuri
State Tamil Nadu
Key Dates
Publish Date 09 Jan 2025
Submission Date 24 Jan 2025
Open Date 24 Jan 2025
Finance
Tender Value 17.50 Lakhs
Tender Fee Ref. Documents
EMD 17500
Exemption Available
Document List
cbb0ca28-550f-47c9-970d-48a19967ecb5.html
BOQ_616105.xls
Pricbidnabard2.pdf
Techbid-nabard2.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 09, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 24, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 24, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

cbb0ca28-550f-47c9-970d-48a19967ecb5.html

xls

BOQ_616105.xls

pdf

Pricbidnabard2.pdf

pdf

Techbid-nabard2.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender