|
| 1 | Taking down shutters of any description, exceeding 1.0 Sqmand n exc 2 sqm each complete all as specified and directed. |
| 2 | Taking down chowkat or frame with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete as specified and directed. |
| 3 | Taking down chowkat or frame with shutter (without taking off shutter from the frames), exc 1.50 sqm but not exc 4.0 sqmeach complete as directed |
| 4 | Taking down and refixing in the same opening shutters of any description exceeding 1 Sq.m but not exceeding 2 Sq.m each complete all as specified and directed. |
| 5 | M&L for IInd class Hard woodplain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered,put together with glue, pinned at joint complete all as specified and directed. |
| 6 | S & F 2nd class hardwood, glazed and skelton shutter, 35mm thick, open rebated and prepared to receive glass, gauze etc,divided into square with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plane, chamfered or rounded, fitted with cut and mitered bead for securing glass, gauze etc, size of member of shutters as specified in SSR Part -I, section 8, class 8.24(a) (Door shutter), supplied and fitted to chowkats all as specified and directed. |
| 7 | S & F, IInd class hardwood 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 8 | M&L for fixed in repairs, IInd class Hard wood plain fillets squares, rectangular or triangular in section, wrought, secured with screws, sectional area exc 13 Sqcm and not exc 25 Sqcm complete all as specified and directed. |
| 9 | M&L for 19mm thick block boards, grade - I quality, exterior grade, decorative type with decorative face veneer on both sideswith external teak wood lipping, 6mm thick alround fixed with screws to timber frame workfor cuboard self or shutters etc, complete all as specified and directed. |
| 10 | S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed. |
| 11 | S&F factory Made solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet with Free EPS shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing for SI No.8080 on ser page No.156 in SSR-2020 (Pt-II), complete all as specified and directed. |
| 12 | S&F standard aluminum section anodised in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 13 | S&Faluminum anodised grill DG- 202 of Deco grill or equivalent fixed with \"F\" section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed.Note : (i)Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE.(ii) Minimum thickness of anodizing shall be 15 microns. |
| 14 | Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etccomplete all as specified and directed |
| 15 | Supply only 4.80mm thick ordinary quality plain not exc 0.5 Sqm each pane withincluding wooden/rubber beading or gasket for aluminium sectioncomplete all as specified. |
| 16 | Supply only 4.80 mm thickglass ordinary quality in plain exc 0.50 Sqm each paneincluding rubber beading or gasket for aluminium sectioncomplete all as specified. complete all as specified. |
| 17 | Supply only for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations with aluminium frame cuboard shutter work complete all as specified and directed. |
| 18 | Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed. |
| 19 | S &F in repairs, aluminium alloy wire cloth,0.45 mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beedingcomplete all as specified and as directed by the Engineer in charge. |
| 20 | Supply and fix aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 250 mm fixed at any position all as specified and directed. |
| 21 | S&F in stainless steel butt hinges, 100mm,medium weight complete all as specified and directed |
| 22 | S&F inextruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed. |
| 23 | S&F in aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed. |
| 24 | Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles.complete all as specifed and directed |
| 25 | M&L for brick work with sub class B old size bricks and of class designation 35 (Minimum compressive strength 35 Kg/Sqcm) , straight or curved on plan exc. 6metre mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 26 | S&F machine cut and machine polished,green marble, 18-20mm thick on horizontal or vertical surface,as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including rendering coat of 10 mm thick in CM 1:4 all as specified and directed. |
| 27 | Dismantling floor, hearth or wall tiling including cementmortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc out side MD land complete all as specified and directed. |
| 28 | Demolition of lime concrete or lean concrete from sunken floor including floor tiles, hacking of surfaces after cleaning with wire brush (floor and adjoining walls) and disposing off debris outside MOD land complete all as specified and directed. |
| 29 | M & L forfilling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) in sunken portion, as per requirement complete all as specified and directed. |
| 30 | M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages :Stage 1:Providing 15mm thick plaster in CM 1:3 mixed withwater proofing chemical of Dr.Fixit or Shalicrete \"R\" of STP Ltd in the proportion/quantity all as per manufacturer\"s instructions.State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces.Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer\"s instructions.Stage 4:Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky.Stage 5:After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer\"s instructions.Stage 6:Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer\"s instructions.Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i)Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid .(ii) The above treatment shall be got executed through applicator of manufacturer and necessary authenticated documents on account of above shall also be produced by the contractor. |
| 31 | M&L for glazed ceramic coloured tiles 350x250x7mm /450x350x7mm thick in vertical surfaces such as skirting/dado and jointed in neat cement slurry and pointed in white or coloured cement to match and including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed. |
| 32 | M&L for Non-skidceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n exc 0.11 sqmin floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 laying floor finished complete all as specified and directed. |
| 33 | S&Fstainles steel sink with drainage board ,1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers including CI cantilever bracket, connecting union etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm including supply and fixing bib tap CP with long body screwed for iron pipe complete all as specified and directed. Make : Nirali, Bule star ISI marked. |
| 34 | S&F for600 x 450mm looking mirror of selected qualitywith chromium plated brass screws and cup washers etc complete all as specified & directed.Make:Prayag polymers Pvt Ltd or equivalent |
| 35 | S&F in repair PVC cabinet mirror of size 600X450 mm complete all as specfied and directed. Make: poly tuf or Prayag polymers pvt ltd complete all as specified and directed. |
| 36 | S&F for 20mm dia fancy type chromium platedcurtain rods with fixing fancy brackets,brass screws etc complete all as specified and directed |
| 37 | S&Fin repairplastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging deviceetc complete all as specified and directed.. |
| 38 | S&F in repair brass chromium plated towel rail 20mm dia \"D\" type 600mm long between flanges,of with and including chromium plated brass screws etc complete all as specified and directed. Make:Prayag polymers Pvt Ltd or equivalent |
| 39 | S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and seat cover and mild steel chromium plated or aluminium hinging device (excludingflushing cistern ) etc complete all as specified and directed.. |
| 40 | S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar tapschromium plated fancy type etc complete all as specified and directed. |
| 41 | Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed. |
| 42 | S&F for CP concealed stop cock 15mm borefancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 43 | S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 44 | S&F in repair Health faucet with 1 mtr tube & hook cat No BEA-40 of Prayag polymers pvt ltd or equivalentcomplete all as specified and directed. |
| 45 | S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 46 | S/Fin repair 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed. |
| 47 | S&F in repairstainless steel grating in ground shape 100mm dia complete all as specified and directed. |
| 48 | -ditto- all as per item above but with holecomplete all as specified and directed. |
| 49 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. |
| 50 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed. |
| 51 | S&F 15mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed. |
| 52 | Ditto all as per item above but 20 mm bore. |
| 53 | S&F in repairs2000 ltrs Rotational moulded polyethylene waterstorage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and as directed. |
| 54 | Taking down cement or cement lime plaster of any description on brick or stone wall and ceiling surface including raking out joints,hacking for key,scrubbing down with water etc and disposing off the rubbish outside MD land complete all as specified and directed. |
| 55 | M & L for rendering 10 mm thick in CM 1:6 on brick walls or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 56 | M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as in ceiling and finishing the surfaces even and smooth with sagol finish complete all as specified and directed. |
| 57 | M/L for 15mm thick rendering in CM 1:4 onsurface of wall mixed with water proofing compound and shall be scored to provide key for rough finishing coat. including necessary scaffoldings etc complete all as specifiedand directed Note:- WPC shall be measured and paid seperately. |
| 58 | Supply only integral water proofing compound. |
| 59 | M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free or equivalent) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed. |
| 60 | M&L chipping, removing carefully concrete surface by low impact hamer/bracker without damaging the structure incl preparation of old surfaces of reinforcement bars as per manufacturer\"s instruction and disposal of debris out side MOD land and applying anticorrosive protective coating for steel reinforcement surfaces andallpying epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete& new mortar, by brush application and building up the profile of structural members by using polymer modified mortar(Molith-PMM) ORPolymer mortar HB of Dr Fixit, upto 20mm thickness including levelling, profiling etc complete all as specified and directed. Make : Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE |
| 61 | M&L for preparation of newplastered surfaces on walls, chajjas,filling of hair line cracks with white cement and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade and as per manufacturer\"s instructions including necessary scaffolding complete all as specified and as directed. |
| 62 | M&L for preparation of new plastered surfaces of wall and two coats of oil bound distemper over a coat of average 1mm thick Birla putty complete all as specified and directed |
| 63 | M&L for preparation of new plastered surfaces of ceiling and applying one coat of oil bound distempercomplete all as specified and directed |
| 64 | M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed. |
| 65 | M&L for preparation of old decorated surfaces of ceiling brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applyingone coat of oil bound distemper complete all as specified and directed. |
| 66 | M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying with roller one coat of oil bound distemperincluding application ofputty for smooth finish.etc complete all as specified and directed. |
| 67 | M&L for preparation of old acrylic surfaces of walls/ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots, washing down with water, filling of cracks with Dr fixit crack filler or equivalent make and applying one coat of 100% antifungal acrylic paint exterior emulsion of approved shade over a coat of acrylic primer including necessary scaffolding work etc complete all as specified and directed. |
| 68 | M&L for preparation of old wooden surfaces of any description, not other wise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 69 | M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller Two coat of oil bound distemperincluding application ofwall care putty for smooth finish.etc complete all as specified and directed. |
| 70 | Petty repairs to wooden joinery works such as Resecuring or easing and adjusting of doors, windows kitchen cabinets in any size, refixing hinges etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engineer In charge. (Note : Replacement of builders hardware if required shall be measured and paid separately as supply only.)Note item No 1 and 2: (a)The contractor will be alloted complaint on daily basis and sufficient resources will be deployed by him/her for completion of day to day comaplaint within 24 Hrs from the time of reporting.Any delay beyond above mentioned time limit suitable penalties as mentioned in relavant clause of Contract.(b)The contractor will make suitable arrangment for emergent complaints and will notify auth rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint.In case of any dispute the decision of accepting officer will be final and binding in this regard.(c)The quoted rated deems to be inclusive of transportation and other expenses required for the resource deployment at the complaint site DAD |
| 71 | Petty repairs to plumbing/internal water supply works such as repair to leaking bibi taps, mixtures stop cocks by tightening and providing sprindle, washer repairs to float valves, low leveled cistern to the satisfication of user complete all as specified and directed. |
| 72 | Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 73 | M&L for providing 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 m and turnings) complete all as specified and directed. |
| 74 | Taking down aluminum window shutter carefully and refixing the same in position replacing rubber bead, worn-out handles and replacing existing broken Aluminum section / glass/wire cloth/backlite sheet/roller, if any, and making window shutter serviceable, complete all as specified and directed.Note - Aluminum section / Glass / wire cloth / Bakelite sheet, handle etc shall be measured and paid separately as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 75 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls in repairs Upto Four Storeycomplete all as specified & directed. |
| 76 | All as per item No.75 above but from Five storey to Eight Storey |
| 77 | All as per item No.75 above but from Nine storey to Twelve Storey |
| 78 | All as per item No.75 above but from Thirteen storey to Sixteen Storey |
| 79 | S & F 110 mm bore PVC (SWR) bends of any radius Upto Four Storeycomplete all as specified & directed. |
| 80 | All as per item No.79 above but from Five storey to Eight Storey |
| 81 | All as per item No.79 above but from Nine storey to Twelve Storey |
| 82 | All as per item No.79 above but from Thirteen storey to Sixteen Storey |
| 83 | S & F 110 mm bore PVC (SWR) branch piece single (Single `Y\") equal or unequal with access door Upto Four Storey complete all as specified & directed. |
| 84 | All as per item No.83 above but from Five storey to Eight Storey |
| 85 | All as per item No.83 above but from Nine storey to Twelve Storey |
| 86 | All as per item No.83 above but from Thirteen storey to Sixteen Storey |
| 87 | S & F 110 mm bore PVC (SWR) Vent cowl from Thirteen storey to Sixteen Store complete all as specified & directed |
| 88 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls in repairs Upto Four Storey complete all as specified & directed. |
| 89 | All as per item No.88 above but from Five storey to Eight Storey |
| 90 | All as per item No.88 above but from Nine storey to Twelve Storey |
| 91 | All as per item No.88 above but from Thirteen storey to Sixteen Storey |
| 92 | S & F 75 mm bore PVC (SWR) bends of any radius Upto Four Storey complete all as specified & directed. |
| 93 | All as per item No.92 above but from Five storey to Eight Storey |
| 94 | All as per item No.92 above but from Nine storey to Twelve Storey |
| 95 | All as per item No.92 above but from Thirteen storey to Sixteen Storey |
| 96 | S & F 75 mm bore PVC (SWR) branch piece single (Single `Y\") equal or unequal with access door Upto Four Storey complete all as specified & directed. |
| 97 | All as per item No.96 above but from Five storey to Eight Storey |
| 98 | All as per item No.92 above but from Nine storey to Twelve Storey |
| 99 | All as per item No.92 above but from Thirteen storey to Sixteen Storey |
| 100 | S & F 75 mm bore PVC (SWR) Vent Cowl from Thirteen storey to Sixteen Storey complete all as specified & directed |
| 101 | M & L for anti termite treatment providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed by Engr-in-Charge. |
| 102 | M & L for anti termite treatmenttreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed |
| 103 | M & L for anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed |
| 104 | M & L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 105 | Cleaning/clearing blocked sewage lines 150mm bore and sludge chambers (PVC/ SGSW/RCC hume pipe ) gully trap of size and sahpe up to any depth by pumping out /removing liquid waste / sewage , plugging the ends pipe or diverting the flow into drains if necessary , removing silt ,sludge etc , sprinking bleaching powder on the silt to avoid bad smell includingall precautionary and safety measures such as sefety belts , lighting arrangements face mask etc and removing the same (silt , sludge & other waste material ) leak proof trucks covered with tarpoline to out side of MD land all as per existing rules and regulations of civil authorities and flushing the sewer line with fresh water etc complete all as specified and directed.( Note :- Length of sewage line including chambers ,traps etc will be measured for payment . However cleaning of manholes shall be measured separately under appropriat item .) |
| 106 | Cleaning/clearing/ blocked sewage lines and removal of foreign material from inside the,floor trapNahani trap, Gully trap and drainage pipe etc,including clearing spot blockages(PVC/ SGSW/RCC hume pipe ) any depth by roddingmanually incl pumping out sludge, water from trap etc including providing trolley mounted pump set with suction pipe of adequate length and minimum60metre delivery pipeetc,daily at 0830 hrs to 1700 hrs incl disposal of debris, spoils and sludge hygienically complete all as specified and directed.NOTE : (i) The contractor/ hisauthorise supervisor of the work will report daily at complaint cell AGE B/Rto receive day to day complaints.ii). All sewage complaints must be attended immediately on receipt but not later than 24 hour.iii). Recovery (Penalty) for not attending complaint beyond 24 hours shall beRs 200.00 per complaint per day delayed.) |
| 107 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 29,520.00 (Minus) as listed in Schedule of CreditNote1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\"Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items. |
