Tender For Highmast Street Light In Krishi Vigyan Kendra Nanpara Rural Village-Balha 18 - Supply & Fixing Of 12.5 Mtr. High Mast Shaft Of Appproved Make With Rising System Hot Dip Galvanized, Inside And Outside, Dip Heaving Pole Sheet Thickness 3 Mm. Top , bahraich-Uttar Pradesh

Tender For Highmast street light in Krishi Vigyan Kendra Nanpara Rural Village-Balha 18 - Supply & fixing of 12.5 Mtr. high mast shaft of appproved make with rising system hot dip galvanized, inside and outside, dip heaving pole sheet thickness 3 mm. Top dia minimum 150 mm, bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3. There and having no circumferntial weld, with accessories for high mast such as head frame suitable for 6 luminaries and its control gear boxes 0.75 H.P. power toll motor, 3 point suspension system with steel wire rope 6 mm dia double drem winch, including makingsuitable foundation as per manufacture drawing/site reuiment along with foundation bolts, nuts, washers, anchor plates etc. complete in all respect. 2 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 170 to 200 watt. Confirming to IP 65 protection complete in all respect. Cat AAA 3 Supply and burring of Safe Earthing Electrode T-39, (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 76 mm, inner Dia 38, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3mm G.I. strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. 4 Supply & Laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect. 5 Supply & Laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitablesize or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(a) 16 sq.mm x 4 core. 6 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN complete in all respect. 40 A TPN. 7 Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect..CAT AAA 8 Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in20mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit.complete in all respect. 9 S/F of 5 KVA Single Phase steblizer complete set. 10 S/F of 900mm X 600mm from make with lettering of signboard fixing on M.S.sheet & Angle frame.

INR 854 /-

INR 10600.0 /-

INR 5.28 Lakhs /-