Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-01-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-02-2025 |
| Sl. No. | Item Description |
| 1 | M & L for checking the leakage,blockage and petty repairs to bib taps, Pillar taps, Stop cock, Conceled stop cock, angle valves, gate valves etc of any description or size for stopping leakage of water by changing washers, etc completeall as specified and directed.Note : Fixtures/ Fittings complete fixture shall be paid under relevant item No 2.00 to 24.00 of Sch \"A\" as supply only and The rates quoted by the contractor are deemed to inclusiveof Dhaga/safeda/PVC washers. Note-(a) If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen.(b) Contractor Proper records (date wise) of complaints received & rectified bythem and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell.(c) Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building in DAD Coplex Panchwati. Rate shall be quoted accordingly, keeping in mind above said all provisions. |
| 2 | Supply only chromium plated fancy type bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed. |
| 3 | Supply only Chromiumfancy type plated Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and directed. |
| 4 | Supply only ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball for 15/20 mm dia iron pipe (Minimum weight 142gms) complete all as specified and directed. |
| 5 | Supply only PVC connection 15 mm dia 45 cm/60cm long with 2 Nos PVC check nuts with washer complete all as specified and directed. |
| 6 | Supply only chromium plated fancy typeStop valve cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and directed. |
| 7 | Supply only chromium plated angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and directed. |
| 8 | Supply only chromium plated brass overhead shower with arm 255mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and directed. |
| 9 | Supply only brass jumper washer, brasshead, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed. |
| 10 | Supply only 15mm dia stop valve concealed type cast copper alloy, screwed down, high pressure chromium plated with long shank including making good dismantled portion complete all as specified and directed. |
| 11 | Supply only32 mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and directed. |
| 12 | Supply only waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and directed. |
| 13 | Supply only waste fittingsbrass chromium plated 40 mm to 50mm dia forstainless steel sink complete all as specified and directed. |
| 14 | Supply only brass CP towel rail 60Cm longcompleteallas specified and directed. |
| 15 | Supply onlygun metal globe or gate valve \"ISI\" MARKED, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 15 mm complete all as specified and directed. |
| 16 | Supply onlygun metal globe or gate valve \"ISI\" MARKED, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm complete all as specified and directed. |
| 17 | Supply only small fittings galvanised iron \"medium grade\" such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed. |
| 18 | Supply only small fittings galvanised iron \"medium grade\" such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and directed. |
| 19 | Supply only CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed. |
| 20 | Supply only 10 ltrs capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC complete all as specified and directed. |
| 21 | Supply only PVC polyplast float valve for cistern tank complete all as specified and directed. |
| 22 | Supply only plastic water closet seat coverwhite closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed. |
| 23 | Supply only CP Health faucet forEuropeon type WC with 1.5m long pipe as per approved sample complete all as specified and directed. |
| 24 | Supply only , CP grating 127 mm dia with/without hole round, fixed on floor / nahani trap, fixed with cement mortar(1:3) complete all as specified and directed. |
| 25 | M & L for petty repairs to joinerys works, such as easing/ adjusting of door, repairs of wire mesh, cub board shutters, iron mongerys, of any type or description and any type of carpentery works etc Easing of window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/ opening , tightening of hinges or changing the position of hinges, adjustement of tower bolt, sliding bolt etc complete all as specified and directed. Note : Hardware fittings shall be paid under relevant items No 26.00 to 36.00 of Sch \"A\" as supply only and The rate quoted by the contractors is deemed to include the necessary tools and plants, screws, nails etc. Note-(a) If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen.(b) Contractor Proper records (date wise) of complaints received & rectified by the them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. (c) Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building. Rate shall be quoted accordingly, keeping in mind above said all provisions. |
| 26 | Supply only 600mm x 450mm size looking mirror, of selected quality glass, with PVC frame made alround, fitted to wooden plug with CP brass screws complete all as specified and directed. |
| 27 | Supply only sliding door bolts 250 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 28 | Supply only MS pressed handles, stove enamelled black, 125 mm long complete all as specified and directed. |
| 29 | Supply only MS barrel tower bolt, stove enamelled black 200mm long complete all as specified and directed. |
| 30 | Supply only 100 mm long MS butt hinges \"medium weight\" cold rolled welded to steel frame work complete all as specified and directed. |
| 31 | Supply only 100 mm size butt hinges of stainless steel medium weight complete all as specified and directed. |
| 32 | Supply only MS sliding door bolts 250 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed. |
| 33 | Supply only 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 34 | Supply only SS locking bolt 100mm of extruded section for WC/ Bath doors complete all as specified and directed. |
| 35 | Supply only 125 mm mild steel pressed handle oval type, stove enamelled black complete all as specified and directed. |
| 36 | Supply only 125 mm SS handle cast type complete all as specified and directed. |
| 37 | S&F in repair stainless steel sink of size 914x460x203mm with bowl size 405x354x203mm. with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union,fixed in position complete all as specified and directed. |
| 38 | S&F in repairs stainless steel sink of size 510x430mm with bowl size 428x380x200mm with out drainage board made out of ,304 grade Stainless steel,1.00 mm thick sheet for kitchen with cantilevers connecting union complete all as specified and directed. |
| 39 | S&F in repair 1.00mm thick stainless steel plate rack overall size (31X36X10 inch) fixed with steel screws complete all as specified and directed. |
| 40 | S&F in repair vitreous china wash basin white flat back size 550 x 400 mm including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete including provision of pair or bracket of angle iron 35x35x6mm duly painted with two coat of synthetic enamel paint over one coat of red oxide zinc chromate primer and embedded one end of bracket in PCC 1:2:4 type B-1 bed blocks and cuttingfor and pinning in ends of brackets in walls and making good complete all as specified and directed. |
| 41 | M&L for manual Sealing of traps, WCs (manually) with neat cement paste after removal of water from it, toprevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as specified and directed. |
| 42 | S&F in repair water closet vitreous china squatting pan of ORISSA pattern size 580 mm X 440 mm white with integral foot rest incl setting the cast iron trap & pan into cement and sand mortar, provn of lime concrete bedding complete.incl valveless syphonicaction type PVC low level flushing cistern with inlet ball valve float & handle incl brackets of 10 ltrs capacity complete all as specified and directed. |
| 43 | S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including provision of lime concrete bedding, valveless syphonicaction type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern Ist quality complete all as specified and directed. |
| 44 | S&F in repair 100mm dia cast iron spunpipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed. |
| 45 | All as per item No 44.00 above but fixed on walls complete all as specified and directed. |
| 46 | S&F in repair 75mm dia cast iron spunpipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed . |
| 47 | All as per item No 46.00 above but fixed on walls complete all as specified and directed. |
| 48 | S&F in repair cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 100 mm dia complete all as specified and directed. |
| 49 | S&F in repair cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of 100 mm dia complete all as specified and directed. |
| 50 | S&F in repair cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 75 mm dia complete all as specified and directed. |
| 51 | S&F in repair cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of75 mm dia complete all as specified and directed. |
| 52 | S&F in repair cast iron shoes of 100 mm dia complete all as specified and directed. |
| 53 | S&F in repairs,cone cap cast iron cowls for 100mmbore pipe complete all as specified and directed. |
| 54 | S&F in repairs, cast iron cowls for 75mmbore pipe complete all as specified and directed. |
| 55 | S&F in repairs, 100mm dia cast iron sanitary connection- short connections pipe of length300mm (ISI MARKED) complete all as specified and directed |
| 56 | S&F in repairs, salt glazed stone ware gully trapssquare or rounded mouthed type P or S of size 150 x 150mm incl excavation earth work conc in Beds, surrounds kerbs & CI grating etc complete all as specified and directed. |
| 57 | S & F in repair PVC (SWR) pipes single socketed, 110 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 58 | S & F in repair PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 59 | S & F in repair PVC (SWR) pipes single socketed, 50 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 60 | S&F in repair PVC (SWR) bends, Tee, single Y, elbow and shoes of any radius of110 mm bore complete all as specified and directed. |
| 61 | S&F in repair PVC (SWR) bends, Tee, single Y, elbow and shoes of any radius of75 mm bore complete all as specified and directed. |
| 62 | S&F in repair PVC (SWR) 75 mm dia floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 63 | S&F in repair, CI floor trap with grating including jointing to waste pipe in run lead,dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate and making good complete all as specified and directed. |
| 64 | M&L for Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints for 100 mm bore of pipe complete all as specified and directed. |
| 65 | M&L for Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints for 75 mm bore of pipe complete all as specified and directed. |
| 66 | S&F in repair rotational moulded polythene water storage tanks in double layer (cylindrical verticalwith closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 300 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified and directed. |
| 67 | S&F in repair rotational moulded polythene water storage tanks in double layer (cylindrical verticalwith closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified and directed. |
| 68 | M&L for Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil bound distemper all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b)Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c)The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d)Cost of above mentioned shall also included in quoted rates. |
| 69 | M&L for Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil bound distemper all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 70 | M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of alkali-resistant primer paint and 1.5mm thick wall care putty complete all as specified and directed.Note : (a) All work shall be done mechanically through authorised applicator only. (b)Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c)The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 71 | M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of ciling surfaces complete all as specified and directed. Note: (a) All work shall be done mechanically through authorised applicator only. (b)Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 72 | M&L for applyingone coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 73 | M&L for applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 74 | M&L for preparation of old surfaces of walls by completet removal of existing and after preparation of surfaces applying primer and further applying two coat of cement base paint complete all as specified and directedNote: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 75 | M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 76 | M&L for Washing, rubbing down and stopping of old surface and applying one coat of acrylic Smooth exterior paint of required shade complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 77 | M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 78 | M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of woodensurfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 79 | M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 80 | M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.Note: (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid start date of the said work.(c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 81 | Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. |
| 82 | Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster (with old damaged existing water proofing compound) including removing the demolition material out side the MOD land complete all as specified and directed. |
| 83 | M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 84 | M&L for providing cement concrete as in roof kerbs, levelling courses for making proper gradient/slope or mud stops rounded or chamfered on edges with B-0, 1:2:4 (using 12.5mm stone aggregate) mixed with water proofing compound as per manufacture instruction including necessary form work complete all as specified and directed.Note: water proofing compound shall be measured and paid separately |
| 85 | Demolition of cement concrete of any description and in any position including removing the demolition material out side the MOD land complete all as specified and directed. |
| 86 | M&L for PCC 1:3:6, type C-1 (using 20mm graded aggregate) as in water tank platform mixed with water proofing compound as per manufacture instruction as in roof floors complete all as specified and directed.Note: water proofing compound shall be measured and paid separately |
| 87 | M&L for 15 mm thick rendering on fair faces concrete at roof slab concrete surface in cement mortar 1:4 and finished even and smooth mixed with integral water proofing compound complete all as specified and directed.Note: WPC shall be measured and paid separately |
| 88 | M&L for surface Preparation:The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC/plaster surface shall be done with wire brushing to attain smooth levelled surface. Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area withsingle component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. Make of water proofing treatment Dr Fixit Roof seal 148 orAsian Paint smart care damp proof or SIKA 710/715 complete all as specified and directed. |
| 89 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 90 | M&L for rendering 15 mm thick in cement mortar 1:6on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 91 | M&L for 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. Note: WPC will be measured and paid saparately |
| 92 | M&L for 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 93 | Supply only liquid water proofing compound as per manufacture instruction complete all as specified and directed. |
| 94 | M&L for Preparation of new plastered surface and applying one & more coat ofwhite putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over tow coat of disteemper oil emulsion complete all as specified and directed. |
| 95 | M&L for Preparation of new plastered or unplastered surfaces of ceiling and applyingthree coats of white wash on ceiling surfaces complete all as specified and directed. |
| 96 | M & L for prepapation of new plaster serface of walls and applying two coats of acrylic emultion weather coat paint over a coat ofprimer over 1mm thick cement base wall care putty complete all as specified and directed. |
| 97 | M&L for uprooting plants (girth n.exc 15 cm of trunk to any of plantsgrown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100ml for each plant in the roof to avoid further growth complete all as specified and directed.Note:-Work has to be executed in multi storey bldgs upto 25 Meter height |
| 98 | Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing,and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces withsteel wire brushes, washed with water and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part oflatexwith 4 part of water and 6 part of cement by weight, coverage oflatex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 Mpa,After this, providing 40 mm (average thickness) guniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary Portland cement 43 grade and 2 part of Ghaggar sand mixed with adhesive/admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guniting to be finished fair with 10 mm thick plaster in Cement Mortar 1:4 with water proofing compound as per maufacture instructions cleaning and removing of waste material etc.complete all as specified and directed.Note: All servicesand work, scaffolding, safety precautions including internal and external surfaces and members of six storey building |
| 99 | S&F welded steel wire fabric, n.exc 4 Kg weight per sqm, cut to length bent to shape required and fixing with and including annealed mild steel wire not less than (0.90 mm dia or fixing with galvanised steel staples or weldingsupplied and fixed complete to RCC, PCC,wood or steel members (All servicesand work, scaffolding, safety precautions including internal and external surfaces and members of six storey building) complete all as specified and directed. |
| 100 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strata surface and free of debris & dust and apply anty rust paint and bonding coat(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.Note :Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer complete all as specified and directed. |
| 101 | M&L for Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:2) for concealed water tubing etc as in brick walls exc 10 cm but not exc 20 cm girth complete all as specified and directed. |
| 102 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for including 250 litres but not exceeding 500 Litres capacity of tanks complete all as specified and as directed. |
| 103 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 500 litres butn.exc 1000 Litres capacity of tanks complete all as specified and as directed. |
| 104 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, drains, culverts and walls etc but excluding ashlar facings, dressed stone work and pre cast concrete articles, built in cement mortarincl removing the unserviceable material out side the MOD land complete all as specified & directed. |
| 105 | M&L for brick work with sub class \"B\" bricks, straight or curved on plasn exc 6.00 m mean radius built in CM 1:6 complete all as specified and directed. |
| 106 | M&L for brick work with sub class \"B\" bricks, straight or curved on plas to any radius in half brick thick built in CM 1:4 complete all as specified and directed. |
| 107 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clip complete all as specified and as directed.Note: work to be executed upto 5th floors height |
| 108 | S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil puttyor aluminium or PVC beading insquares notexceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 109 | S&F Glazing with 4 to 5mm thick sheet glass, ordinary quality, of any size including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete all as specified and directed. |
| 110 | S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil puttyor aluminium or PVC beading insquares notexceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 111 | M&L for solar control film 50 micron reflective type sticked to glass pane as per instructions of manufacturers exceeding 1.5 sqm complete all as specified and as directed. |
| 112 | M&L for cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC\"s, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning ofdrain pipes 150 mm to 250 mminternal diaby rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at thelocation notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time by engaging/deploying with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil. complete all as specified and directed by Engineer-in-charge.Note-1. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen.2.Contractor Proper records (date wise) of complaints received & rectified by the them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. 3.Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building. Rate shall be quoted accordingly, keeping in mind above said all provisions. |
| 113 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws to steel framed including necessary welding work including dismantling old existing sheet work any type complete all as specified and directed. |
| 114 | M&L for PCC 75 mm thick 1:3:6 type C-1 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 115 | M&L for PCC 40 mm thick 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed. |
| 116 | S&F in repair Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete all as specified and directed. |
| 117 | S&F in repair Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 118 | S&F in repair toughened corner glass shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified and directed. |
| 119 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed. |
| 120 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm butnot exceeding 4.0 Sq.m each complete all as specified and directed. |
| 121 | Taking down shutters of any description n. exc 1.00 sqm each complete all as specified and directed. |
| 122 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed. |
| 123 | M&L for plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 124 | S&F pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 125 | S&F pressed steel frames for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 126 | M&L for 2nd class hard wood 35mm thick glazed and skelton doorshutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters complete all as specified and directed. |
| 127 | M&L for 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidewith teak woodlipping on edges of shutter complete all as specified and directed. |
| 128 | M&L for 35mm thick plain framed, panelled shutter (two panell) 2nd class hard wood with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered partical board with commercial veneering both faces. The size of rail and stile as per IS : 1003 (part I), kinl seasoned and chamically pressure treated complete all as specified and directed. |
| 129 | M&L for Solid PVCDoor frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 130 | S&F factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick mouldedprelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing complete all as specified and directed. |
| 131 | M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails including dismantling timer scantling complete all as specified and directed. |
| 132 | S&F in repair Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/ Bathroom/ Toilet/ Kitchen and Cabinets complete all as specified and directed. |
| 133 | S&F Stainless Steel (Grade 304)barrel tower bolt of 200 mm length of extruded section complete all as specified and directed. |
| 134 | S&F in repair Stainless Steel (Grade 304)barrel tower bolt of 200 mm lengthofextruded section complete all as specified and directed. |
| 135 | S&F Stainless Steel (Grade 304) barrel tower bolt of 150 mm lengthofextruded section complete all as specified and directed. |
| 136 | S&F in repair Stainless Steel (Grade 304)barrel tower bolt of 150 mm lengthofextruded section complete all as specified and directed. |
| 137 | S&F Stainless Steel (Grade 304)barrel tower bolt of 100 mm lengthofextruded section complete all as specified and directed. |
| 138 | S&F in repair Stainless Steel (Grade 304)barrel tower bolt of 100 mm lengthofextruded section complete all as specified and directed. |
| 139 | S&F Stainless Steel (Grade 304) sliding door bolt, of size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 140 | S&F in repair Stainless Steel (Grade 304) sliding door bolt, of size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 141 | S&F Stainless Steel (Grade 304) sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 142 | S&F in repair Stainless Steel (Grade 304) sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 143 | S&F Stainless Steel (Grade 304) butt hinges of size 75mm complete all as specified and directed. |
| 144 | S&F in repair Stainless Steel (Grade 304) butt hinges of size 75mm complete all as specified and directed. |
| 145 | S&F Stainless Steel (Grade 304) butt hinges of size 100mm complete all as specified and directed. |
| 146 | S&F in repair Stainless Steel (Grade 304) butt hinges of size 100mm complete all as specified and directed. |
| 147 | S&F 300mm long mild steel ordinary rat rail rod patterndoor springs including roller and roller plate including welding work complete fixed to pressed steel framecomplete all as specified and directed. |
| 148 | S&F in repairs 300mm long mild steel ordinary rat rail rod patterndoor springs including roller and roller plate including welding work complete fixed to pressed steel frame complete all as specified and directed. |
| 149 | S&F Stainless Steel (Grade 304) handles,150 mm long, complete all as specified and directed. |
| 150 | S&F in repair Stainless Steel (Grade 304) handles,150 mm long, complete all as specified and directed. |
| 151 | S&F floor door stopper of Stainless Steel (Grade 304) alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm complete all as specified and directed. |
| 152 | S&F in repair Stainless Steel (Grade 304) wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 153 | S&F Stainless Steel (Grade 304) wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 154 | S&F in repairs chromium plated/ Stainless Steel (Grade 304) body mortice lock vertical type size 100 mm MS 4 lever complete all as specified and directed. |
| 155 | M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; hold fast, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 including dismantling old steel/iron work complete all as specified and directed. |
| 156 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with Stainless Steel (Grade 304) cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 157 | S&F in repair door closer aluminium esxtruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 158 | M&L for welding in repairs exc 2.5 cm but n. exc 5 cm in length, thickness of metal to be welded exc 6mm but not exc 9mm thick complete all as specified and as directed. |
| 159 | S&F in repair 6mm thick plywood, grade BWR, typr BB, fixed with screws to timber frame, complete all as specified and directed. |
| 160 | S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil puttyor aluminium or PVC beading insquares exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 161 | S&F Glazing with 5.5mm thick sheet glass, ordinary quality, of any size including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete all as specified and directed. . |
| 162 | M&L for Preparation of Newwood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pinkprimer complete all as specified and directed. |
| 163 | M&L for preparation of new steel surfacesof any description over 10cm width & girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxid primer complete all as specified and directed. |
| 164 | M&L for Treating ends of posts, back of chowkhats etc area tarred exceeding 0.1 Sq.m but not exceeding 0.5 Sq.m each including preparation of surfaces of wood and wood based material, steel and iron work and treated with tar or coal tar black paint complete all as specified and directed. |
| 165 | S&F in repair pre-laminated PVC rigid foam sheet wall panelling of PVC sheet 1.15 x 595 and5 mm thick stuck on inner frame work of 50 mm wide strips of 3.5Rmx30 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 600 mm C/C. The PVC strips to be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasters complete all as specified and directed. |
| 166 | S&F powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter including ornamental aluminium grill, 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc including taking down old existing window complete all a specified and directed by Engr-in-Charge. |
| 167 | S&F Three Track Sliding powder coated aluminium Window of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.60mm thick and Shutter section of sizes 39.40 mm x 17.70mmx 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thicktinted glass & stailness steel wire cloth, 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm with suitable handle, tower bolt/locking arrangment and fixed with aluminium wire staples complete including taking down old existing window complete all as specified and directed. |
| 168 | S&F aluminium powder coated grill of bar size 6.25mm with square size 75mm fixed with suitable channel section (if required opening for handle or AC as per dirction of Engr in Charge) including taking down complete all as specified and directed. |
| 169 | S&F Powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size 02 Nos tower bolt 200 mm , sliding bolt 300 mm long 01 No, door handles 200 mm 2 Nos, aluminium butt hinges stainles steel 125 mm 04 Nos, hydraulic door closer heavy duty and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 1.00 mtr in width including taking down old existing door complete all as specified and directed.Make of glass (MODI/FLOAT/ATUL).(if required one space for window AC shall be provided as perdirction of Engr in Charge) |
| 170 | S&F in repair powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board complete all as specified and directed.(Make: GLASS Make MODI/ FLOAT/ ATUL). |
| 171 | S&F in repair 25 to 32 mmdia decorativepowder coated drapery rod in assorted sizes, colour as approved including a pair of endbrackets/finials, fixed to masonary/ concrete walls as required complete all as specified and directed.Note : The provision of finial/end cap shall be as per site requirement and as directed. The cost of end cap/finial shall be deemed included in the per running meter cost as per the size of door / window. |
| 172 | S&F steel window/ventilator Z sec with side hug shutter factory madeincluding projecting type hinge with steel handle and steel peg stayetc. complete with glazing bars completeconfirming to Fe 410-0 and making good complete all as specified and directed. |
| 173 | S&F steel window/ventilator Z sec with side hug shutter factory madeincluding projecting type hinge with steel handle and steel peg stayetc. complete with fly proof wire mess shutter dovetailed or welded completeconfirming to Fe 410-0 and making good complete all as specified and directed. |
| 174 | S&F easying and adjusting aluminium doors incl replacement of small articles like rubber gaskets , aluminum beads screws etc incl taking down and refixing in same opening complete all as specified and directed. |
| 175 | Dismantling ceiling boarding/wall paneling board with frames any description, fixed in any position with screw and removing rubbish out of MoD land complete all ascomplete all as directed. |
| 176 | M&L for decrative febric vertical blinds/louvers with complete fittings and fixtures channel or rails are made from high quality fabrics with strips or louvers, hang from the head rail and linked by chain at the bottom. Vertical blinds have two control. One allows the blind louvers to be tilted to the left or right and block the light out, let it in, or filter it by tilting the louvers to an angle and other one lets louvers fully black by pull either to the left, right or centre all blinds come with head rail with match to all componenet with complete acessary complete all as specified and directed.Note: complete fittings measuerd and paid in Sqm bsed on open area coverd by blinds |
| 177 | M&L providing and fixing Gypsum Board 12mm thick of size 600x600 in ceiling fixed with powder coated snap gird of 600x600 frame work such as ceiling including hanging and fixing complete all as specified and directed. |
| 178 | S&F 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape drilling holes required for fixing for wood pannel top and bottom portion of the doors where as requirement at site with all fittings, Stainless Steel (Grade 304) plates, locks, scewes, bolts and nuts complete all as specified and directed. |
| 179 | M & L for repairs and servicing of rolling shutters and removing of worn out components wherever required such as hood covers, laths, ball bearings, helical wire springs, lock plates, bracket plate, shaft pipe and straightening of existing guide channels, gear boxes, laths, hood cover at required places including greasing and welding and refixing in the same opening for smooth functioningand making good the disturbed surfaces of walls to match with existing complete all as specified and directed by the Engineer-in-Charge (NOTE: (i) Quoted rate is inclusive for replacement all minor spare parts as requiredand supply of major spare part such as MS Spring, ball bearings,laths, shaft pipe, gear set required for replacement will be measured and paid separately under relevant items |
| 180 | S&F in repair MS spring for rolling shutter fo any size or any lenght complete all as specified and directed. |
| 181 | S&F in repair ball bearing offor rolling shutter complete all as specified and directed. |
| 182 | S&F in repair gear set for rolling shutter complete all as specified and directed. |
| 183 | S&F in repair of rolling shutter shaft assembly including all necessary fittings complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
