Tender For Road Safety Work On Dhamora Rathonda To Chincholi Road (Odr) - Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Mad Of High Intensity Grade Sheeting Vide Clause 801.3, Fixed Cover Aluminium Sh, rampur-Uttar Pradesh

Tender For Road Safety Work On Dhamora Rathonda To Chincholi Road (Odr) - Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) 2 Cautionary Sign- T-Junction/X-Junction Sign & zebra etc (90 cm equilaterial triangle) 3 Stop Sign Board (90cm hight Octagonal) 4 Speed Limit(60 cm circular) 5 Direction and Place Identification Signs (90 cm equilaterial triangle) 6 Hazard Sign Board(30 cm x 90 cm rectangular) 7 Single chevron(50 x60 cm) 8 Double chevron(155 x60 cm) 9 Cat Eyes (raised pavement marker).Supply & fixing of moulded cats eye without shank raised pavement markers made of polycarbonate moulded body and reflected pannel with micro prismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD for 4280 type H and complying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-07-DO-III 11-06-1997. The height, width and length shall not exceed 20 mm 150 mm and 105 mm and with minimum relfective area of 13 sqcm. and the each side slope to the base shall be 350. Fixing will be without nails but using with twin polymer shanks bitumen adhesive on bitumen roads as per manufactures recmmendation including site clearence etc. and complete as per direction by E/I. 10 Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post 150x75x5 mm spaced 2m center to center, 1.8 m high with 1.1 m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 and IS:1384, metal beam rail to be fixed on the vertical post with spacer of channel section 150x75x5 mm, 300 mm long complete as per clause 810. (MoRTH-810 (8.23) Sl. No. 27 (Ch. 7.600 to 7.700) +(29.030 to29.130) 11 Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area. Thickeness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level uniform and free from streak and holes. 12 Repetitive bar/ Transvers bar marking by hot appiled Thermoplastic Marking of 300 mm wide and 5 mm height, at 1000 mm apart (one set is of 6 Strips). 5 mm height is achieved through six applications of thermoplastic, applied at an interval not less than 1 hour after the previous layer gets solidified, Alternatively, made of Mastic Asphalt or any equivalent material which would provide 15 mm high As per Circular No-62 Patrank Sankhya-879 MT/Samanya Varg / 60MT/ 2019 DT. 16-01-2019 13 Kilometre StoneReinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixed in position including painting & Printing Etc 14 5th Km Stone 15 Ordinary Km Stone 16 Hectometer Stone 17 Supply, fixing & eraction of built up Cantilever Structure 6M span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm MS plate at bottom The horizontal truss shall comprise of 50 mm dia heavy class MS pipe and 40 mm dia heavy MS pipe as bracing & 10mm MS plate at bottom for fixing to vertical post as per structure desing & drawing with one of steel primer and to coats of synthetic enamel plant. the work includes construction of RCC foundation of size 90x 90 m of required depth as per site condition for built up structure including earth work in excavation 100 mm thick lean concrete in 1:4:8 (cement coarse sand and 40mm gauge SB) RCC with 1:2:4 (cement, coarse sand and 20 mm stone grit) including supply and fising of 25 mm dia foundation bolts 600 mm long as per provision of structure desing including cost of reinforcement & shuttering The lateral vertical clearances and and complete.Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect. The rates shall include cost of desing, fabrication, supply, transportations, local shifting Erection of signage structure using crance inclusive of all taxes. royalty , VAT etc all T&P machine, material and labour required for pr. 18 Retro reflective sheeting Type XI with 4 mm thick ACM single sideMorth 801.Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. 19 Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. 20 Supply and fixing tree plate size of 150x150 consisting a retro reflective type-XI fixed over 1.50m mm thick aluminium sheet as per direction of Engineer-in-charge.

INR 2354 /-

INR 425000.0 /-

INR 45 Lakhs /-