Tender For Repairing And Painting Work And Supply Of Essential Items At Bhairav Ghat Shelter Home In Ward-75 Zone-4., Kanpur-Uttar Pradesh

Repairing And Painting Work And Supply Of Essential Items At Bhairav Ghat Shelter Home In Ward-75 Zone-4.-1 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 3 Providing and fixing brass bib cock of approved quality: 20 mm nominal bore 4 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan 5 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity white 6 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with: 4.0 mm thick panes. 7 Supply and fixing of 1.50 H.P. submersible pumps ISI mark 2000 L.P.M., 80mtr head (Kirlosker/KSB/Crompton make) etc all complete. 8 Starter with board suitable for 1.50 H.P. submersible pump etc all complete. 9 Supply and fixing of 3core copper cable for enternal works etc all complete. 10 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle Iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces 11 Supply and fixing of anodized aluminium partition having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.50x44.65mm as vertical member and 11.40x44.45 as bottom and horizontal member with all fitting, glass panes of 4mm thick handle and locks complete. 12 Supply fitting of button holder including all complete of work. 13 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:2:4 (1 cement: 2 coarse sand (zone-iii): 4 graded stone aggregate 20 mm nominal size) 14 Providing & laying precast cement concrete kerb stone drain etc all complete. 15 S/F of 13watt L.E.D. lighting of approved quality etc all complete. (M.R.) 16 Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat. 17 Supply of takhat etc all complete. 18 Supply of gadda for bed etc all complete. 19 Supply of bedsheet including all complete of work. 20 Supply of blanket (kambal) etc all complete. 21 Supply and fixing of curtains including rod & brackets for door & windows etc all complete.

INR 1180 /-

INR 52974.0 /-

INR 5.29 Lakhs /-