|
| 1 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge. |
| 2 | 15.1.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-incharg |
| 4 | 15.6.1 In Cement mortar |
| 5 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 6 | 15.25.1 G.S. Sheet |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - -All work upto plinth level: |
| 8 | 4.1.4 1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 11 | 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 13 | 5.20 A.2 Thermo-Mechanically Treated bars |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 15 | 9.1.3 Local best quality Tolhao wood. |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 17 | 9.6.2 Local best quality Tolhao wood |
| 18 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 19 | 9.63.1 300x16 mm |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 21 | 9.64.1 300x10 mm |
| 22 | Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 23 | 9.66.1 125 mm |
| 24 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 25 | 9.62.1 125x75x4 mm |
| 26 | 62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2(1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry,but excluding the cost of nosing of steps etc. complete. |
| 27 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 28 | 12.1.1 1.00mm thick with zinc coating not less than 275gm/m2 |
| 29 | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. |
| 30 | 12.4.1 0.80mm thick with zinc coating not less than 275gm/m2 |
| 31 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : |
| 32 | 9.2.1 Local best quality Tolhao wood. |
| 33 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately): |
| 34 | 12.22.2 White face insulating board |
| 35 | 12.22.2.1 12 mm thick |
| 36 | 12 mm cement plaster of mix |
| 37 | 13.4.1 1:4 (1 cement : 4 coarse sand) |
| 38 | 15 mm cement plaster on rough side of single or half brick wall of mix |
| 39 | 13.5.1 1:4 (1 cement: 4 coarse sand) |
| 40 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 41 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 42 | 13.31.1 Water thinnable cement primer |
| 43 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 44 | 13.29.1 New work (two or more coats) over and including priming coat with cement primer:- |
| 45 | Applying priming coat:- |
| 46 | 13.37.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: |
| 48 | 13.44.1 Two or more coats on new work |
