|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalentdesign mix) DSR 15.2.2 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)DSR 4.2.5 |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete Size of Tile 500x500 mm DSR 11.41.1 |
| 4 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91 |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre sqm 185.65(DSR 13.41) |
| 7 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm DSR 13.45.1 |
| 8 | Paint or venishing new iron work or new wood work withone coat priming and two coat of approved paint i/c all material labour T&P S.I. No.-641 |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completeHot finished welded type tubes DSR 10.16.2 |
| 10 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR 12.1.1 |
| 11 | Earth work in excavation in foundation in ordinary soil (loamclay or sand) including lift upto 1.5 m, leadupto 30 m andincluding filling watering and ramming of excavated earth into the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer- in- charge with in alead of 30m from the foundation trenches where machine can not move |
| 12 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. |
| 13 | Reinforcement cement concrete work in beam,suspended floors,roof having slope up to5%andings,balconies,shelves,chajjas,lintels,bands,plain windows sills,stair case& sprial stair case aboveplinth up to floor five levelexcluding the cost of centering,shuttering,finishing & reinforcement with 1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size) |
| 14 | Providing and laying in position specfied grade of reinforcement cement concrete, excluding the cost of centering,shuttering,finishing & reinforcement. All work up to plinth level.1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size) |
| 15 | Reinforcement cement concrete work in beam,suspended floors,roof having slope up to5%andings,balconies,shelves,chajjas,lintels,bands,plain windows sills,stair case& sprial stair case aboveplinth up to floor five levelexcluding the cost of centering,shuttering,finishing & reinforcement with 1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size) |
| 16 | Brick work with commonburnt clay (non-modular) bricks of class-150 in foundation & plinth in. Cement morter 1:4 (1 cement:4 coarse sand) |
| 17 | Brick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 4 coarse sand) |
| 18 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 19 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 20 | Steel reinforcment for R.C.C work including strainghtening cutting bending placing in position & binding all complete up to plinth level.Thermo machanically treated bars of grade Fe-500D or more. |
| 21 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 22 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 23 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 24 | Providing and fixingBarbed iron wire after fixing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 25 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 26 | ToiletSite Clearance with clearing of jungle uprooting of vegetables grass bush wood trees as per S.I. 259 |
| 27 | Earthwork in cutting in soil mixed with gravel and buolder including lift upto 1.5 metre and including filling watering & ramming of excavated earth into the trenches or into the space between the building and side of foundation and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m from the foundation trenches ….as per PWD specification 4.4.1 scheduled item no. 253A |
| 28 | Boring of 250 mm dia piles of single under reamed of 50 cm dia bulb and & 3.5 mtr depthin Black Cottonsoilwith hand operated auger machine i/c all labour T/P ETC New item page no-23 item no-3 |
| 29 | R.C.C in 1:1.5:3 with c/s &20 mm Grit in pile i/c all labour etc S.No-287+(difrence of 279 b-279a) |
| 30 | R.C.C in1:1.5:3 with c/s &20 mm Grit in Grade Beam i/c all labour etcS.I.-N0-285 |
| 31 | R.C.C 1:1.5:3 with c/s & 20 mm Grit in column i/c all labour , material & T&P etc.S.I.-289 |
| 32 | Cement concrete with 4cm (1/2\"\") gauge approved stone ballast, approved coarse sand. cement in the proportion 12 : 6 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. S.I.-273 |
| 33 | 230 mm thick M-15 class Brick works in substructure( Foundation) with1:6 cement sand mortar including all materials labour & T&P etc. complete work S.I.-303 |
| 34 | 230 mm thick M-15 class Brick works in superstructure with1:6 cement sand mortar including all materials labour & T&P etc. complete work S.I.-303+309+310 |
| 35 | R.C.C. work with cement approved coarse sand and 20 mm approved stone grit in the proportion of 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I.wire and including necessary centering and shuttering etc. and also including supply of all material ,labour and tools and plants etc. require for proper completion of the work . S.I. 283 |
| 36 | As in item( S.I.283)above but in RCC T-beam and slab roof in proportion 1:1.5:3and slab Curing by water ponding by contacter 14days S.I. 288 |
| 37 | Reinforcement(M.S. or Iron work) . In pile,grade beam, lintel & Sunshade and Slab Fe 550 Should Use cutting bending & its Proper placing and Binding including mateials and labour S.I.504 |
| 38 | Supply of M.S. angle(40*40*5)iron for door and ventilator frame with M.S. sheet Pannel welding fabrication and one coat of red oxide paintetc S.I.-502 with 1 mm thk MS sheet SI 503 |
| 39 | Supply ofapproved M.S. Z section quality and drawing made of flat iron i/c all material, labour, fabrication, T&P with one coat of red oxide paint Si new Item |
| 40 | Supply ofapproved M.S. small size sectionl quality and drawing made of flat iron i/c all material, labour, fabrication, T&P with one coat of red oxide paint Si 502 |
| 41 | Fixing of glass pan as per PWD Si 812(ii) |
| 42 | Fixing door, window and ventilator hold fast with P.C.C.1:2:4C/S & 20 mm stone griti/c all complete S.I.-279a |
| 43 | Providing, Laying & jonting 100 mm diaPVC pipe Rainwater drainage |
| 44 | Plaster in wall 1:6 C/Sand it Should be 14 days water curing by contactor S.I. -586 |
| 45 | Earth work in filling by 1 km T/T work site i/c all labour T&P |
| 46 | Sand filling in Foundation and floor i/c all labour and T&P S.I.-255 |
| 47 | Laying of C.C.in 1:4:8 with c/s and 40 mm Stone ballast in foundation of Floor i/call labour ,materials and T&P etc. S.I.281 |
| 48 | 12 mm thick Plaster work in 1:3 with c/s and mortar in septic tank i/c all labour & T&P SI 582 |
| 49 | Suplly and fixing of 6 mm china white glazed tile in dado in 1:3 c/s mortar I/C all material , Labour & T&P etc. S.I.-628 |
| 50 | Providng and laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring or skirting laid with 1 : 3 cement mortar (1 cement , 3 coarse sand) finishing with cement sturry & with pigment grouting & Polishing complete I/C S/O all material labour T & P etc. required for proper completion of work excluding base contrete. New Item |
| 51 | Providing and applying of cement based Putty average thickness 1 mm , of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete 13.8 Page 50 |
| 52 | one priming coat and two coat of oil bound disteper on new work of approved quality surface with this paint to give an even shade including supply of all materials, labur, tools and plants etc. required for proper completion of work....... as per PWD specification 6.4.1, 6.4.2scheduled item no. 649 |
| 53 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) SI 13.47.1 |
| 54 | Paint or venishing new iron work or new wood work withone coat priming and two coat of approved paint i/c all material labour T&P S.I. No.-641 |
| 55 | S/F of hexagonal type fan boxPage 54 S.I.-7 |
| 56 | Earth work in excavation for foundation of apron , step and soak pit etc.i/c all labour T&P SI 257 |
| 57 | M150 Brick Work in 1:4 with c/s & mortar in satir ramp and septick tank i/c all labour & T&P SI 305 |
| 58 | 40 mm thick P.C.C. apron flooring in1:2:4 with cement, sand &20 mm stone grit without base concrete i/c all complete work S.I.-605 |
| 59 | 12 mm thk Plaster Work in 1:4 with c/s and mortar in septick tanki/c all labour & T&P SI 584 |
| 60 | Supply and fixing 35mm thick Sitapur ply door shutter. SI 470A |
| 61 | Supply & fixing galvanzad mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows & including supply of C.P. Teak wood battens 8cm. x 1cm. (3\"x3/8\") and including supply and fixing of necessary screws, all materials, labour and tools and plants etc. required for proper completion of the work. SI 455 |
| 62 | 12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of coarse sand of 1.25 fineness modulus. SI 581 |
| 63 | One coat hot coaltar @ kg/sqm on new suface including supply of all materials, labour and tools and plants,etc. required for proper completion.of work. SI 652+653 |
| 64 | Apprpoximate cost of and aluminium fitting SI 472A |
| 65 | Provide and fixing of 15mm dia B-class ISI marked G.I. pipe compliete work as in S.I. 201 |
| 66 | Provide and fixing of 20mm dia B-class ISI marked G.I. pipe as in S.I. 202 |
| 67 | Making Water connection of G.I. pipe line with G.I. main as in S.I. 210 |
| 68 | S/F of brass bib cock heavy quality 15mm dia (400gms) ISI marked as in S.I. 237 |
| 69 | S/F of brass stop cock heavy quality 15mm dia (400gms) ISI marked as in S.I. 245(a) New Item |
| 70 | supply and fixing of low density polythene tank sintex or equivalent as in S.I. 246 new item |
| 71 | Provide and fixing offirst qualitywhite glased Orissa pattern WC pan Hindustan ,Cera make as in S.I. 301a |
| 72 | Provide and fixing 550x400 mm hand wash besin of white glased earthen ware offirst qualityHindustan ,Cera make complete workas in S.I. 306 |
| 73 | P/F good quality rubber plug 32 mm dia for Sink or Laboratry basin i/c supply of all materials ,labour , and T&P etc S.I.No-325 |
| 74 | P/F 600x450 mm bevelled edage mirror of Atul , Kiron make glass with Indian polish 6.5 mm x450mmx6 mm hard board sheet fixed to wooden cleats with CP brass screw and washer i/c supply of all materials labour and T&P.S.I.No-332 |
| 75 | Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour, T&P etc. required for proper completion of the work. SI 336 |
| 76 | Providing and fixing 5 cm dia HCI Soil or vent pipe. SI 352 |
| 77 | Providing and fixing HCI terminal guard 50mm dia. SI 361 |
| 78 | Supply and fixing of Nahani Trap Indian make of approved heavy quality complete with CP brass grating. SI 371 |
| 79 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C |
| 80 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 81 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required |
| 82 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) |
