Housing Urban and Rular Development Government Departments Closing in 0 days TDR #47083494

Tender For Bungalow No. 10 Situated In Darulshafa Compound, Dr. Bhimrao Ambedkar Mahasabha Office, Renovated The Outer Part Of The Building For The Samvidhan Diwas Avam Baba Sahebs Parinirvan Diwas, Constructed A New Ladies Toilet, Laid Tiles On The Stag

Issued by Government Departments · lucknow, Uttar Pradesh
Tender Value
4 Lakhs
Estimated cost
Bid Submission
13 Jan 2025
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
770
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Bungalow no. 10 situated in Darulshafa Compound, Dr. Bhimrao Ambedkar Mahasabha Office, renovated the outer part of the building for the Samvidhan Diwas Avam Baba Sahebs Parinirvan Diwas, constructed a new ladies toilet, laid tiles on the stage platform and did other works. - Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) 2 Distempering with 1st quality acrylic distemper(ready mixed )having VOC (Volatile organic compound) content less than 50 gram/litre, of approved manufacturer , including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats) .DSR-13.81 3 Providing and applying white cement based putty of average thicknes 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. DSR No 13.80 4 Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (DSR-13.99.1) 5 Finishing walls with Acrylic Smooth exterior paint of required shade: New work ( Two or more coats applied @ 1.67ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (ace Adv, walmastar) asian, berger. D.S.R Item No- 13.46.1 . 6 Providing and laying vitnifed floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours shades, laid on on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc. complete.Size of Tile 600x600 mm (D.S.R-11.41.2) 7 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on planincluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5m as directed by engineer in charge 2.1.1 all kinds of soilDsr-2.1) 8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm nominal size).PWD (SCH) 273. 9 Brick work with common burnt clay F.P.S (non madular) brick of class designation 7.5 in foundation and plinth in ::cement mortar (1 cement :4 coarse sand ) dsr 6.1.1) 10 Brick work with common burnt clayF.P.S (non madular) brick of class designation 7.5 in superstructure above plinth level up to floor V level in all shape and sizes in ::cement mortar (1 cement :4 coarse sand ) dsr 6.4.1) 11 Reinforcement cement concrete work in beams ,suspended floors ,roofs having slope up to 15 landing s, balconies, shelves, chajjas,lintels, bands plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering ,shuttering, finishing and reinforcement with 1:1.5:3 ((1 cement 1.5coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).D.S.R No-5.3 12 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelfor Thermo-Mechanically Treated bars of grade Fe-500D or more (DAR Vol-1, 5.22A.6) . Page No- 294 13 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). D.S.R No-13.5.1 14 Providing and placing on terrace ( at all floor levels ) polyethene water storage tank , IS 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fitting and the base support for tank .(DSR- 18.48) 15 Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DSR No- 18.8.2 16 Providing and fixing of CPVC gate valve of 20mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 17 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia. 18 Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 19 Providing and fixing of PVC Cross Tee of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 20 Providing and fixing of Nahani Trap Tee of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 21 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level. 1:2:4 (1 cement 2coarse sand (zone-III) 4 graded stone aggregate 20 mm nominal size). DSR No- 4.1.3 22 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.S.R No- 11.38) 23 Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm 24 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white viterous china orissa pattern W.C. pan of size 580x440mm with integral type foot rest. (DSR- 17.1.1) 25 Providing and fixing of white glazed earthen ware Wash Hand Basin with without pedestal ( 22x16 ) with C.P jali, C.P pilar cock, C.P angle valve ,PVC connection 15mm dia 450mm long including supply of all materials labour T&P etc. required for proper completion of the work. 26 Providing and fixing C.P. brass shower heavy quality or eqv.) with 15mm inlet:100 mm diameter 27 Providing and fixing CP Brass towel rail 750x20mm together with pair of CP brass brackets to fit the towel rail complete 28 Supply and Fixing C.P. brass bib cock 15mm. dia.Long body including supply of all materials, labour, T&P etc. required for proper completion of the work. 29 Supply and fixing ISI marked 32 mm thick flush door shutter commercial conforming quality conforming to IS : 2202 (Part I) including supply and fixing of hinges,screws, sliding bolt, tower bolt, door stoper and Allum. Handel etc complete work. 30 Supply of Salwood wrought framed Single rebates and fixed including simple moulding straight work as in Chaukhat frame including supply of all materials, labour, T&P etc. required for proper completion of work. 31 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Door chowkhats DSR No- 14.2.1 32 Centering and shuttering including strutting ,propping etc.and removal of form for suspended floors, roofs,landings, balconies and access platform. DSR-5.9.3 33 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18

BOQ

Name of Work: Darulshafa Compound sthit Bungalow no-10, Dr Bhimrao Ambedkarmahasabha karayalaya me samvidhan diwas avam Baba Saheb ke parinirvan diwas hetu bhawan ki bahari satah ka sudhar karya, ek naya mahila toilet ka nirman karne ka karya, munch ke plateform per tiles lagane ka karya evam anya karya.
Sl. No. Item Description
1Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91)
2Distempering with 1st quality acrylic distemper(ready mixed )having VOC (Volatile organic compound) content less than 50 gram/litre, of approved manufacturer , including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats) .DSR-13.81
3Providing and applying white cement based putty of average thicknes 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. DSR No 13.80
4Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (DSR-13.99.1)
5Finishing walls with Acrylic Smooth exterior paint of required shade: New work ( Two or more coats applied @ 1.67ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (ace Adv, walmastar) asian, berger. D.S.R Item No- 13.46.1 .
6Providing and laying vitnifed floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours shades, laid on on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc. complete.Size of Tile 600x600 mm (D.S.R-11.41.2)
7Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on planincluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5m as directed by engineer in charge 2.1.1 all kinds of soilDsr-2.1)
8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm nominal size).PWD (SCH) 273.
9Brick work with common burnt clay F.P.S (non madular) brick of class designation 7.5 in foundation and plinth in ::cement mortar (1 cement :4 coarse sand ) dsr 6.1.1)
10Brick work with common burnt clayF.P.S (non madular) brick of class designation 7.5 in superstructure above plinth level up to floor V level in all shape and sizes in ::cement mortar (1 cement :4 coarse sand ) dsr 6.4.1)
11Reinforcement cement concrete work in beams ,suspended floors ,roofs having slope up to 15 landing s, balconies, shelves, chajjas,lintels, bands plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering ,shuttering, finishing and reinforcement with 1:1.5:3 ((1 cement 1.5coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).D.S.R No-5.3
12Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelfor Thermo-Mechanically Treated bars of grade Fe-500D or more (DAR Vol-1, 5.22A.6) . Page No- 294
1315 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). D.S.R No-13.5.1
14Providing and placing on terrace ( at all floor levels ) polyethene water storage tank , IS 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fitting and the base support for tank .(DSR- 18.48)
15Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DSR No- 18.8.2
16Providing and fixing of CPVC gate valve of 20mm dia nominal size of approved quality as per directed by Engineer-in-Charge.
17Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia.
18Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.
19Providing and fixing of PVC Cross Tee of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge.
20Providing and fixing of Nahani Trap Tee of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.
21Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level. 1:2:4 (1 cement 2coarse sand (zone-III) 4 graded stone aggregate 20 mm nominal size). DSR No- 4.1.3
22Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.S.R No- 11.38)
23Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm
24Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white viterous china orissa pattern W.C. pan of size 580x440mm with integral type foot rest. (DSR- 17.1.1)
25Providing and fixing of white glazed earthen ware Wash Hand Basin with without pedestal ( 22\"x16\" ) with C.P jali, C.P pilar cock, C.P angle valve ,PVC connection 15mm dia 450mm long including supply of all materials labour T&P etc. required for proper completion of the work.
26Providing and fixing C.P. brass shower heavy quality or eqv.) with 15mm inlet:100 mm diameter
27Providing and fixing CP Brass towel rail 750x20mm together with pair of CP brass brackets to fit the towel rail complete
28Supply and Fixing C.P. brass bib cock 15mm. dia.Long body including supply of all materials, labour, T&P etc. required for proper completion of the work.
29Supply and fixing ISI marked 32 mm thick flush door shutter commercial conforming quality conforming to IS : 2202 (Part I) including supply and fixing of hinges,screws, sliding bolt, tower bolt, door stoper and Allum. Handel etc complete work.
30Supply of Salwood wrought framed Single rebates and fixed including simple moulding straight work as in Chaukhat frame including supply of all materials, labour, T&P etc. required for proper completion of work.
31Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Door chowkhats DSR No- 14.2.1
32Centering and shuttering including strutting ,propping etc.and removal of form for suspended floors, roofs,landings, balconies and access platform. DSR-5.9.3
33Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18

AI Tender Summary

OUR REF NO 47083494
AUTHORITY Government Departments
TENDER VALUE 4 Lakhs
LAST DATE 13-01-2025
Authority
Authority Name Public Works Department
Work Description Tender For Bungalow no. 10 situated in Darulshafa Compound, Dr. Bhimrao Ambedkar Mahasabha Office, renovated the outer part of the building for the Samvidhan Diwas Avam Baba Sahebs Parinirvan Diwas, constructed a new ladies toilet, laid tiles on the stage platform and did other works. - Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) 2 Distempering with 1st quality acrylic distemper(ready mixed )having VOC (Volatile organic compound) content less than 50 gram/litre, of approved manufacturer , including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats) .DSR-13.81 3 Providing and applying white cement based putty of average thicknes 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. DSR No 13.80 4 Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (DSR-13.99.1) 5 Finishing walls with Acrylic Smooth exterior paint of required shade: New work ( Two or more coats applied @ 1.67ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (ace Adv, walmastar) asian, berger. D.S.R Item No- 13.46.1 . 6 Providing and laying vitnifed floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours shades, laid on on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc. complete.Size of Tile 600x600 mm (D.S.R-11.41.2) 7 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on planincluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5m as directed by engineer in charge 2.1.1 all kinds of soilDsr-2.1) 8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm nominal size).PWD (SCH) 273. 9 Brick work with common burnt clay F.P.S (non madular) brick of class designation 7.5 in foundation and plinth in ::cement mortar (1 cement :4 coarse sand ) dsr 6.1.1) 10 Brick work with common burnt clayF.P.S (non madular) brick of class designation 7.5 in superstructure above plinth level up to floor V level in all shape and sizes in ::cement mortar (1 cement :4 coarse sand ) dsr 6.4.1) 11 Reinforcement cement concrete work in beams ,suspended floors ,roofs having slope up to 15 landing s, balconies, shelves, chajjas,lintels, bands plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering ,shuttering, finishing and reinforcement with 1:1.5:3 ((1 cement 1.5coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).D.S.R No-5.3 12 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelfor Thermo-Mechanically Treated bars of grade Fe-500D or more (DAR Vol-1, 5.22A.6) . Page No- 294 13 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). D.S.R No-13.5.1 14 Providing and placing on terrace ( at all floor levels ) polyethene water storage tank , IS 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fitting and the base support for tank .(DSR- 18.48) 15 Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DSR No- 18.8.2 16 Providing and fixing of CPVC gate valve of 20mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 17 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia. 18 Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 19 Providing and fixing of PVC Cross Tee of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 20 Providing and fixing of Nahani Trap Tee of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 21 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level. 1:2:4 (1 cement 2coarse sand (zone-III) 4 graded stone aggregate 20 mm nominal size). DSR No- 4.1.3 22 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.S.R No- 11.38) 23 Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm 24 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white viterous china orissa pattern W.C. pan of size 580x440mm with integral type foot rest. (DSR- 17.1.1) 25 Providing and fixing of white glazed earthen ware Wash Hand Basin with without pedestal ( 22x16 ) with C.P jali, C.P pilar cock, C.P angle valve ,PVC connection 15mm dia 450mm long including supply of all materials labour T&P etc. required for proper completion of the work. 26 Providing and fixing C.P. brass shower heavy quality or eqv.) with 15mm inlet:100 mm diameter 27 Providing and fixing CP Brass towel rail 750x20mm together with pair of CP brass brackets to fit the towel rail complete 28 Supply and Fixing C.P. brass bib cock 15mm. dia.Long body including supply of all materials, labour, T&P etc. required for proper completion of the work. 29 Supply and fixing ISI marked 32 mm thick flush door shutter commercial conforming quality conforming to IS : 2202 (Part I) including supply and fixing of hinges,screws, sliding bolt, tower bolt, door stoper and Allum. Handel etc complete work. 30 Supply of Salwood wrought framed Single rebates and fixed including simple moulding straight work as in Chaukhat frame including supply of all materials, labour, T&P etc. required for proper completion of work. 31 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Door chowkhats DSR No- 14.2.1 32 Centering and shuttering including strutting ,propping etc.and removal of form for suspended floors, roofs,landings, balconies and access platform. DSR-5.9.3 33 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18
Basic Detail
Tender No 3376/E-Tender/2024-25 dt. 28.12.2024
Bidding Type Tender
Location
City lucknow
State Uttar Pradesh
Key Dates
Publish Date 07 Jan 2025
Submission Date 13 Jan 2025
Open Date 13 Jan 2025
Finance
Tender Value 4 Lakhs
Tender Fee 770
EMD 40000
Exemption Not Available
Document List
216d87c4-753a-4b17-9a2b-65e179b0e0fd.html
BOQ_1747811.xls
T1-3376.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 07, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 13, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 13, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

216d87c4-753a-4b17-9a2b-65e179b0e0fd.html

xls

BOQ_1747811.xls

pdf

T1-3376.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender