Tender For Repair To Three Room Of Z P School Building At Singapur No. 1, Tal Murbad, Dist - Thane
Tender Value
9.25 Lakhs
Estimated cost
Bid Submission
21 Jan 2025
0 days left
EMD
9258
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
murbad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair To Three Room Of Z P School Building At Singapur No. 1, Tal Murbad, Dist - Thane
BOQ
| Sl. No. | Item Description |
| 1 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.As directed by Engineer in charge. |
| 2 | Removing cement tiles, or marble or polishedshahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 3 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.As directed by Engineer in charge. |
| 4 | Removing other typetruss below 5 metres span from roof and stacking the materials as directed with all leads and lifts etc. complets Bd.W.8 Page No.587 |
| 5 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.Bd.A. 12 Page No. 264 |
| 6 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.Bd.M.12 Page No. 385. |
| 8 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.Bd.M.12 Page No. 385. |
| 9 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 10 | Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. Bd.M.29 Page No. 391 |
| 11 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box As directed by Engineer incharge. |
| 12 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Bd.U.1 Page No. 537 |
| 13 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. Bd.C.8 Page No. 278 |
| 14 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) |
| 15 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.). |
| 16 | Providing and applying interior wall finish luster of approved make on internal wallsurface as detailed below Scrapping the surface with emery paper and wipe clean wallprimer with brush with mineral turpentine with brush 8 to 10% and oil 15 to20% with roller and allowing to dry for a period 6 to 8 hours. wall putty withappropriate proportion of water allowing to dry for period 4 to 6 hours. Scrappingwith Emery paper 180 and wipe clean. Applyingwall primer with brush with mineralturpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 andwipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineralturpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil withroller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With priorapproval of S |
| 17 | Providing and applying Royale Luxury Emulsion of approved make on internal wallsurface as detailed below Scrapping for surface with emery paper and wipe cleanfor area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % orwater by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall puttywith appropriate prpportion of water of allow to dry for period of 4 to 6 hours ofactivity. Scrapping with emery paper and wipe clean Applying paints RoyaleLuxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% byrole Applying paints Royale luxury emulsion 2nd coat with brush with water content 40to 45% or 65 to 70 % by roller. (With prior approval of S.E.) |
| 18 | QUALITY CONTROL TESTING CHARGES |
| 19 | ROYALTY FOR SAND |
| 20 | ROYALTY FOR RUBBLE |
AI Tender Summary
Tender Timeline
Jan 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 21, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 22, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender