Tender For Providing Additional Windows And Exhaust Fans For The Dormitories ( Cvas Girl Students Hostel) Of Tvcc Building Mannuthy,
Tender Value
7.83 Lakhs
Estimated cost
Bid Submission
13 Jan 2025
0 days left
EMD
19600
Bank guarantee accepted
Document Fee
1755
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mannuthy → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Additional Windows And Exhaust Fans For The Dormitories ( Cvas Girl Students Hostel) Of Tvcc Building Mannuthy, Providing Additional Windows And Exhaust Fans For The Dormitories ( Cvas Girl Students Hostel) Of Tvcc Building Mannuthy,
BOQ
| Sl. No. | Item Description |
| 1 | Appendix A:Civil work |
| 2 | 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up thegaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium(minimum thickness of powder coating 50 micron) |
| 3 | 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 4 | od175632/2024_2025 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): With pin headed glass panes of 4.00 mm thickness |
| 5 | 21.11.1 Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - inCharge complete.205 x 19 mm |
| 6 | 21.15.2 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium |
| 7 | 9.48.2 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square orround bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ woodenframes with rawl plugs screws etc |
| 8 | 15.28.1 Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50metres lead of:G.S.Sheet |
| 9 | od174537/2024_2025 Supply and fixing of SS 304 grade 700 mm diameter wind turbine ventilators with FRP base on the roof area all complete as per the direction of engineer in charge. |
| 10 | 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material anddisposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.Incement mortar |
| 11 | od177050/2024_2025 Cutting and forming of circular dia holes of maximum dia 250mm in the walls of any height made of solidblock /country burnt brick of not less than 20cm thick including charges for making the operation dust proof etc on all floors upto five levels |
| 12 | od180529/2024_2025 Providing and fixing PVC pipes inside core cutting area and pointing with cement mortar as per directionof Engineer in Charge. 250 mm dia 4 Kg/cm2 |
| 13 | 13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 14 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two ormore coats on new work |
| 15 | 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and includingone coat of special primer applied @ 0.75 ltr /10 sqm |
| 16 | od175849/2024_2025 Providing mosquito proof net (stainless steel) for windows/similar openings with powder coated aluminium for frames (vertical,top,bottom,middle), and hinges,locking arrangements,rubber beading etcall complete as per the drawings and the direction of engineer in charge |
| 17 | od180792/2024_2025 Providing and fixing mosquito proof net(Nylon) for openings with powder coated aluminium frames for fixed portions all complete as per the drawings and the direction of engineer in charge. |
| 18 | Appendix B:Electrical work |
| 19 | 1.7.1 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulatedcopper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X1.5 sq. mm earth wire |
| 20 | 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 21 | 1.27.1 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modularswitches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 22 | 90.6.10.1Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recessincluding cutting the wall and making good the same in case of recessed conduit as required20 mm |
| 23 | od173213/2024_2025 Supply, testing and commissioning of 10 inch - 250 mm sweep Heavy Duty Exhaust fan in metal frameworking on 230 V A/C as per direction of engineer in charge.(Almonard/ crompton/ bajaj or equivalent) |
AI Tender Summary
Tender Timeline
Jan 06, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 13, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 15, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender