|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. |
| 3 | Supplying and laying Polythene Sheet (150gm/sq.m.) over damp proof course or below flooring or roof terracing or in foundation trenches. |
| 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips(20 mm.size) excluding shuttering and reinforcement, if any, in ground floor as per relent I.S Code.a) Pakur / Chandil Variety |
| 5 | Brick work with 1st class bricks in cement mortar (4:1)(a) In foundation and plinth |
| 6 | (b) In superstructure, ground floor |
| 7 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 8 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips(20 mm.size) excluding shuttering and reinforcement, if any, in ground floor. a) Pakur / Chandil Variety |
| 9 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.I.Other than SAIL/TATA/RINL(As per 6th. Corrigendum) (a) For works in foundation, basement and uptoroof of ground floor / upto 4m. (ii) Tor steel Rod/HYSD/Fe415/Fe 500D. I.Other than SAIL/TATA/RINL(As per 6th. Corrigendum) |
| 10 | 125 mm. thick brick work with 1st class bricks in cement mortar (3:1) in ground floor. |
| 11 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity) (a) Do - by fine sand |
| 12 | (b) 75 mm. thick brick work with 1st class bricks set in sand cement mortar (3:1) in ground floor including H.B. netting in every alternate layer. |
| 13 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor) (ii) With 4:1 cement mortar |
| 14 | (b) 10 mm. thick plaster |
| 15 | (i) With 6:1 cement mortar. (b) 20 mm. thick plaster |
| 16 | (c) 15 mm. thick plaster |
| 17 | Supplying and laying true to line Virtified tiles of approved brand ( size not less than 600 X 600 X 10 mm thick) in floor skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91 Kg./Sq.m. or using polymerised adhesive (6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 kg of cement per sq.m. below motar only, joints,groujed with admixture of white cement and colouring pigment to much colour of tiles / exposive grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labou and all other incedental charges comple true to the manufacturers specification and direction of Engineer - in - Charge (White cement, synthetic adhesive and grout material to be supplied by the contractor).With application slurry @ 1.75 Kg/Sq.m., 20 mm sand cement mortar(1:4) & 2 mm thick cement slurry at back side tiles, 02 kg/Sq.m. white cement for joint filling with pigment.(A) Deep Colour & White |
| 18 | Supplying, fitting & fixing 1st quality Ceramic tiles in wall and floors to match with the existing work & 4 nos. of key stones (10 mm) fixed witharaldite at back of each tiles & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tile including roughning of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 19 | (B) Wall : -With sand cement mortar(1:3) 15 mm thick cement slurry at back side of tiles using cement @2.91 Kg/Sq.m. & joint filling using white cement slurry @ 0.20 Kg/Sq.m.(a) Area of each tile uotp 0.09 Sq.m.i)Coloured decorative - |
| 20 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5 mm thick) |
| 21 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats |
| 22 | Wood work in door and window frame fitted and fixed complete icluding a protective coat of painting at the contact surface of the frame excluding cost of Concrete, Iron Butt Hinges and M.S Clams.(The quantum should be correted upto three decimals). (d) Sal: Local |
| 23 | Supplying, fitting and fixing M.S. clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction.(Cost of cement concrete will be paid separately) (c) 40mm. X 6mm. 125mm.Length. |
| 24 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (v)75mmx60mmx3.15mm |
| 25 | Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt. |
| 26 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (hexagonal/round rod) (iv) 125mm grip x 10mm dia rod. |
| 27 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(c) 300mm long. |
| 28 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol for maldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (a) 35mm thick shutters (single leaf) |
| 29 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i)Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 30 | (a) Priming one coat on timber, plasteredsurface with synthetic enamel/ oil bound primer of approved quality including smooth ening surfaces by sand papering etc. |
| 31 | (b) Priming one coat on steel or other metalsurface with synthetic enamel/ oil bound primer of approved quality including smooth ening surfaces by sand papering etc. |
| 32 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: |
| 33 | (a) On timber or plastered surface :With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) |
| 34 | (b) On steel or other metal surface : (iv) Two coats (with any shade except white) |
| 35 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A)In 10-12 Micron thickness Annodizing film. 1) Natural white.a) 2- track sliding window |
| 36 | i) Bottom framee |
| 37 | ii) Top and side frame. |
| 38 | d)Shutter for all traack sliding window.i) Bottom & Top member. |
| 39 | ii)Style side member. |
| 40 | iii)Interlock member. |
| 41 | h) louvered window.i) Top, bottom and sidemember. |
| 42 | ii)Louvered Section. |
| 43 | (Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)(ii) 4 mm. thick |
| 44 | Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material,labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floorTwo Coat |
| 45 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate (payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work |
| 46 | C (ii) 25 mm dia. medium quality |
| 47 | (e) (ii) 40 mm dia. medium quality |
| 48 | (B) For Concealed Work, (a) 15 mm dia. medium quality |
| 49 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(vii) 25 mm dia |
| 50 | Supplying, fitting and fixing bib cock or stop cock. |
| 51 | (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 52 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar |
| 53 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 54 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer, (a) 500 litre capacity |
| 55 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity. (a) 1st story from G.L. |
| 56 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 57 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(ii) 550 mm X 400 mm size |
| 58 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 59 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(a) For depth upto 150 metre.(i) 40 mm dia. boring etc. |
| 60 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.(i) 40 mm dia. |
| 61 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets..(i) 40 mm dia. |
| 62 | Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm. (i) 40 mm dia. |
| 63 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 64 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(ii) 750 mm long |
| 65 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. |
| 66 | (A) Above ground, (ii) 110 mm dia. |
| 67 | (B) Under ground. (ii) 110 mm dia. |
| 68 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With \"P\" trap |
| 69 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm |
| 70 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm |
| 71 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm |
| 72 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (i) Plastic (hallow type) black |
| 73 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm |
| 74 | Supplying, fitting and fixing liquid soap container. (c) Fibre glass |
| 75 | Supplying, fitting and fixing towel rail with two brackets. (b) Aluminium. (ii) 25 mm dia. and 600 mm long |
| 76 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety (Other than SAIL/TATA/RINL). |
| 77 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant. I.S.Code.SAIL/TATA/RINL). |
| 78 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia (Other than SAIL/TATA/RINL) |
| 79 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. |
| 80 | A) UPVC Pipes:(i) 75 mm. Dia. |
| 81 | a) Plain Tee - (i) 75 mm. Dia. |
| 82 | d) Shoe - (i) 75 mm. Dia. |
| 83 | Add 18% GST over summation of sl no 01 to 82 |
| 84 | Add 1% Labour Welfare Cess over summation of sl no 01 to 83 |
