|
| 1 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-13 mtr. Long = 482.3 kg |
| 2 | 200 Kg., 9 Mtrs. long PCC pole |
| 3 | 33 KV Pin Insulator Polymer Composite (10 KN) |
| 4 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 5 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 6 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 7 | 11 KV Strain hardware (T&C type) fittings |
| 8 | 33 KV V cross-arms 75x75x6 mm angle (Each weight 24.60 Kg) |
| 9 | Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) |
| 10 | 33 KV Top clamps 75x75x6 mm Angle |
| 11 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 12 | Clamp65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 13 | Concreting of structures & foundation (1:3:6) |
| 14 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 15 | Red oxide paint |
| 16 | Aluminium paint |
| 17 | Danger Boards Enamelled 33 KV |
| 18 | Aluminium Binding wire and tape |
| 19 | M.S.Nuts with Bolts |
| 20 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 21 | Stay set complete without Stay wire 16 mm. (Painted) |
| 22 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 23 | Clamp65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) |
| 24 | Stay Insulators 90X65mm |
| 25 | Back filling of poles with boulders. |
| 26 | G.I. WIRES4.0 MM. (8 SWG) |
| 27 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 28 | Danger Boards Enamelled 11 KV |
| 29 | Covered conductor70 Sq. mm. XLPE insulation for 11 KV |
| 30 | 11 KV Single pole cut point fitting100x50x6 mm channel |
| 31 | Erection cost |
| 32 | 18% (CGST+MPGST) on Erection cost |
