Tender For Construction Of Cable Trench, Ferro Cover, Approach And General Miscellaneous Civil Works At 33Kv S/S Laxman Doongri, Jaipur - 1 Part-A (Bldg.) 2 1.1Earth Work In Surface Excavation Not Exceeding 30Cm. In Depth But Exceeding 1.5 Meter In Wi, jaipur-Rajasthan

Tender For Construction Of Cable Trench, Ferro Cover, Approach And General Miscellaneous Civil Works At 33Kv S/S Laxman Doongri, Jaipur - 1 PART-A (Bldg.) 2 1.1Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed : All kinds of soil 3 1.8Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 4 3.1.6 & 3.1.2 Providing & Laying in position cement concrete i/c curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering – All work up to plinth level.: (A) 1:4:8 (1 cement:4 course sand: 8 graded stone aggregate 40 mm nominal size). 5 M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). 6 6.1.6/B-6Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: CementMortar 1:6 (1- Cement: 6- Sand). 7 4.1Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 8 4.9Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 9 4.13.2Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Hot rolled deformed bars (IS : 1139). 10 5.1.2/B-5Brick masonry with F.P.S. bricks of class designation 75 infoundation and plinth with bricks cement mortar 1:6 (1- cement: 6- coarse sand). 11 12.3.2/B-12Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish: (A) 20mm thick 12 11.26/B-11Random rubble dry stone kharanja under floor . 13 7.22P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.Size 600x600mm 14 9.2/B-9Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 15 9.8/B-9Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 16 9.8.1/B-9Extra if square,rectangular hollow tubularsections are used or grill made by flats only 17 16.48.1/RS & F of fiber Reinforced ferro cement Drain cover(light duty) designed for side drain for class B road loading duly marked on cover with adequate steel reinforcement having thickness 50 mm to 75 mm anti-corrosive bitumen painted M.S. Plate Rim and on MS lifting hooks admixture like plasticizer shrinkage resistance compound abrasion resistant as per approved drawing and design complete in all respect for drain opening size 300 to 450 mm standard drain cover size 600mm x 1200 mm x 50 mm

INR 236 /-

INR 7 Lakhs /-