Design, Fabrication And Fixing Of Ice Prevention System For Improving Operational Sustainability Of Cryogenic Liquid Oxygen Cylinders At Hbt Trauma Care Hospital
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jan 2025
0 days left
EMD
16000
Bank guarantee accepted
Document Fee
3300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Design, fabrication and fixing of Ice Prevention System for Improving Operational Sustainability of Cryogenic Liquid Oxygen Cylinders at HBT Trauma Care Hospital
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in foundation and plinth in: Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 2 | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting. |
| 3 | Providing and laying in position plain cement concrete of specified grade cement with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level :Nominal Mix of 1:1.5:3 |
| 4 | Excavation by using splitters for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in hard rock, reinforced concrete, for depths/lifts upto 1.5M, including drilling, breaking in small pieces, mucking, dressing/trimming the sides, leveling of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking in measurable heaps for future use within owners space or disposing within an initial lead of 150m |
| 5 | Supplying & installing moulded HDP / Fibre water tank. for -ve suction only, having capacity 1000 ltrs.fitted with necessary accessories |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge- 32 mm nominal outer dia Pipes |
| 7 | Supplying and erecting 15 mm (½\") dia. NBCM Body chrome finished quartzoid bulb upright sprinkler having 68° C fixed temperature rating with deflector disc of conventional construction and quality conforming to international standards and listed by LPC (formally FOC U.K.) U.L.F.M. of USA or approved and listed by Tariff Advisory Committee (TAC) OF India |
| 8 | Monoblock pumpsets: 3 H. P. three phase motor, with head of (24- 38mtr.) giving discharge of (3.75 – 1.75 lps) (50 x 40mm ). Pump body: Cast Iron, Impeller: Bronze, Shaft SS410 |
| 9 | Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge |
| 10 | Providing and fixing gun metal gate valve with C.I. wheel of approved 32 mm nominal bore. |
AI Tender Summary
Tender Timeline
Jan 03, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 09, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender