Tender For Providing 100 Kva Dtr With Abc Line At Pattuvam Road, Kannur-Kerala

Tender For Providing 100 Kva Dtr With Abc Line At Pattuvam Road- 1 Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles 2 Erection of Anchor clamp / dead end clamp for 11kV ABC of any size 3 Erection of suspension clamp for 11KV ABC of any size 4 FitingOnenoMVTonexistingcrossarmexcludingterminationwork (for One phase) of any rating for 11 kV AB Cable 5 Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm 6 ProvidingoneCoilEarthusingGIearthwire,diggingseparatepitat standard distance away from the pole/structure & backfilling. 7 TransportingLTABCbyhiredvehicletoadistanceupto5kmand carring up to 2 drum including loading and un loading using crane 8 Erection of Anchor clamp / dead end clamp for LT ABC of any size 9 Erection of suspension clamp for LT ABC of any size 10 Installation of Insulation piercing connector for main to service line main:16-95 sqmm, Tap 16-95 sqmm 11 Installation of Insulation piercing connector for main to service line main:16-95 sqmm, Tap : 4-35 sqmm 12 InstallingOneNo.4waySatelliteConnectorofsizeMain:16to95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size 13 Fitting of one No. pole top service connection box of standard size (up to 4 way) using ss strap/B&N of suitable size in to the PSC/A poles at the standard height excluding giving connections 14 Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles 15 Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc. 16 Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation. 17 Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading. 18 Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 19 Fitting5channelcrossarms,ABswitch,DOfuse,LA,HT< connections on existing DP, 3 LT fuses. 20 Drilling hole of various sizes on existing Channel/Cross Arm. 21 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 22 Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc. 23 Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. 24 Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line. 25 Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole. 26 Additional rate for excavation of Pit for A type pole in Rock. 27 Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock. 28 Additional rate for excavation of one Pit for HT Pole/HT Stay in Rock. 29 Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line. 30 InstallingoneDTRMeterwithboxonexistingpolesandgivingthe complete connections incl. conveyance of materials. 31 ProvidingTransformerfencing,using50x50x6mmAngleiron,40x6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation 32 Providingyardmetallingwith6mm&40mmthickbluemetalas specified after constructing a curb wall. 33 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 34 Providingconcretemuffing(0.45x0.45x1.5m)inclusiveofcostofall material (as per specification). 35 Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 36 Erecting one LT PSC Pole in position incl. digging & back filling pit. 37 Additional rate for excavation of one Pit for LT Pole/LT Stay in Rock. 38 FittingoneAdditional75x40mm,1.8mChannelcrossarminexisting single pole incl. conveyance of materials. 39 Brickworkincementmortarforsuperstructureasperthedirectionof departmental staff. 40 Dismantling(withoutdamage)onekmLT3ph4wireOHline,cross arms, insulators and stacking the conductors in rolls. 41 Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. 42 Providing Stay for LT poles incl. digging & back filling pit. 43 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 44 Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 45 Fittingoneset(3No.)11kVLAandgivingconnectionsexcluding earthing. 46 Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 47 Erecting 9M PSC Pole as Support pole for ABC Stringing work 48 Erecting A Type Pole as Support pole for ABC Stringing work

INR 1416 /-

INR 13900.0 /-

INR 5.54 Lakhs /-