|
| 1 | Surface excavation not exc 30 cm deep and averaging 15 cm deep in soft/ loose soil complete all specified and as directed |
| 2 | M&L for Excavating in trenches in soft/loose soil, n.exc1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out complete all as specified and directed. |
| 3 | Excavation in post holes n.exc 0.5 cum each getting out, returning, filling in ramming earth or borken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n.exc 50m and making good complete. |
| 4 | Earthwork in excavation over areas by mechanical means in any kind of soil byhydraulic excavator as indrains exc 1.5mtr wide includinggetting out the excavated soil complete all as specified and directed by Engr-In-charge |
| 5 | Description all as per item No 4.00 above but for depth exc 1.5 mtr but n.exc 3 mtr complete all as specified and directed by Engr-in-charge |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers under floors or trenches complete all as specified and directed.complete all as specified and directed. |
| 7 | Removing excavated soiln exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 8 | M&L for hardcore of broken stone or boulders of gauge exc 63mm but n.exc 100 mm, deposited, spread, levelled in layers n.exc 15cm thick ,watered,rolled and rammed to a true surface complete all as specified and directed. |
| 9 | M&L for machine pressed precast concrete interlocking paver block any shape and size and colour alternate red and yellow conforming to IS-15658-2006, M-35 grade of 60 mm thickness with grey cement and no pigment complete all as specified and directed. |
| 10 | M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 11 | Removing excavated soil to a distance exc 250m but n.exc 500 mtr away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 12 | M&L for 100mm thick cement concrete type B-2,1:2:4 (40mm graded aggregate) as in flooring including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 13 | Forming Construction jointstraight and vertical through full thickness of slab,Joints shall be formed to width of 12 mm and filled with pre-formed bituminuous filler board and top 20mm of joint to be filled with grade \"B\" sealing compound over primer surface and including forms for sides of joint if any complete all as specified and directed. |
| 14 | M & L forPlain Cement Concrete Type D-2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 15 | M&L for PCC 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete of post holes complete all as specified and directed.. |
| 16 | M&L for PCC 1:2:4 type type B-0 12.5 mm graded aggregate as in fixing holdfast ,in benching for manholes, mud stops,bands, coping, bed plate etc including necessary form work, if any and finishing exposed surface even and smooth using extra cement complete all as specified and directed. |
| 17 | M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 18 | Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick workand finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed. |
| 19 | M&L Glazed ceramic Coloured tiles 450x300x7 mm thick, on vertical surfaces such as skirting, dados and risers etc.laid over 10mm thick screed bed or bedding layer in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed. |
| 20 | Material & Labour for applying Two or more coats ofexterior weather coat in camouflag pattern premium acrylic emulsion paint over a coat of primer new surfaces complete all as specified.w surfaces |
| 21 | S&F stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and fitting the same including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size complete all as directed. |
| 22 | S&F 12mm thick toughned glass as in partition for glasss view fixed over stainless steel frame work including cutting to shape, drilling holes and puching at edges and centres with stainless steel Glass spider fittings,glass corner etc as per requirement and filling gaps with silicon gun complete all as directed by Engr-In-Charge.. |
| 23 | S/F framed work as in doors or gates of angle/tubular or other section with gusset plates, rails, braces,holdfast etc cut to shape, drilled, counter sunk complete, drilled for fixing of steel sheeting or other covering etc.,to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, running rails and guides also fastening and fixing complete all as specified and directed. |
| 24 | S&F mild steel work in posts and struts in fencing including cutting tops to shape as directed, notching for wires etc, flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting and rivetting etc conforming to FE-290 Gde E-165 complete all as specified and directed. |
| 25 | S&F Mild steel round bars 10mm dia and over,cut to length,bent to shape required including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed)not less than 0.9mm dia or securing with clips or weld.complete FE-410-W(Gde E-250)quality A or Fe290(Gde-E-165) all as specified and directed. |
| 26 | S&F MS Screw bolts(machine made)with haxagonal or square heads at one end and screwed the other or screwed both ends each screwed to be fitted with washer and one haxagonal or square nut not exceeding 5cm long dia of shank 5 to 10mm.complete all as specified. |
| 27 | Fixing only Chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and directed. |
| 28 | Supply onlychain link fencing MS galvanised with opening size 50x50mm and 3.00mm thickness (approved by GE/EIC) fixing to angle iron post, rails including fixing with staining bolts to post/struts of specified length with nuts and washer, etc including provision of binding wire complete all as specified by Engr-in-Charge.Note:- Nut and Bolts to be measured in seperate item. |
| 29 | S&F Galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixijg to any type of std steel rails straining bolts including securing or tying at crossings with and provision of galvanized mild steel wire,staples or steel pins etc complete all as specified and directed. |
| 30 | M & L pre-paintedGalvalume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thickof any colour having tensile strength of 550 mpa as in roof covering , chajjas/walls, fitting & fixing, zinc coatingincludingtapping screw and etc complete all as specified and directed. |
| 31 | S & F pre- paintedGalvalume aluminum zinc coating GI based plain steel sheet 0.50mm thickof any colour having tensile strength of 550 mpa as in roof covring,fixing ,zinc coatingincludingself tapping screw etc complete all as specified and directed. |
| 32 | S&F steel work in tubular trusses and posts,purlins,vertical/horizontal chin up bar and similar work including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 graded st-240 complete all as specified and directed. |
| 33 | M& L forsteel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings,base plates, gusset plates cleatsand heavy brackets etc bracing to trusses(beam,tee,angle,flat section,plates and similar section) at tie and rafter etc including distance pieces, cleats etc conforming to Fe-410-W(Gde-E-250) quality Acomplete all as specified and directed. |
| 34 | M/L preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed. |
| 35 | M & L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, overhangs etc complete all as specified and directed. |
| 36 | S&F TMT bars 6-8mm dia,cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with themild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified. |
| 37 | M&L for 6mm dia round bar to form mesh type structure including welding and finishing to angle iron complete all as specified and directed |
| 38 | S&F TMT bars 10 mm dia and over,cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with themild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified. |
| 39 | M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate set in cement mortar 1:6 as in landings, cover slabs for manhole etc, water tank base and similar work complete all as specified and directed. |
| 40 | M&L for Fly ashBrick work straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 41 | M&L for brickwork with sub class\"B\" bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and directed. |
| 42 | M&L for loose filling with broken stone aggregates of size 12.5 and 20mm complete all as specified and directed. |
| 43 | M&L for filling of Pea gravel 3mm to 5mm size as in recharging pits complete all as specified and directed. |
| 44 | M&L for filling of coarse sand/Red bajri as in recharging pits complete all as specified and directed. |
| 45 | S&F PVC grating as in well cap for 150mm bore pipe complete all as specified and directed. |
| 46 | M&L for boring hole 300mm dia complete by DTH comp rotary method to a depth upto 50 mtr in any type of soil including disposal of surplus soil complete all as specified and directed. |
| 47 | Supplying,lowering and fixing into bore 150mm dia PVC casing pipe with perforated holes including wrapping of filter mesh around pipe as whole complete all as specified and directed. |
| 48 | M&L for filling for pea size gravell 10mm size in bore holes complete all as specified and directed by Engr-in-Charge. |
| 49 | M&L for laying of 450mm bore reinforced cement concrete,class NP3 pipes with one collar per length of pipe with filling of joints with CM 1:3 complete all as specified and directed. |
| 50 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as concrete bed, laid to falls in trenches in any depth including packing under, and haunching against the sides of NP-3 pipes 450mm bore, after the pipes have been laid and tested including complete all as specified and directed |
| 51 | M & L sahara P Kota green tiles size 600mm x 600mm x 12mm thick laid over 15 mm thick screed bed of cement motar 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing and complete all as specified and directed |
| 52 | M & L for stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate, block of finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished as directed |
| 53 | M&L for reinforced cement concrete nominal mix type B-1(1:2:4) using 20mm graded aggregate as in beams, bressummers, lintels over 1.5 mtr span complete all as specified and directed. |
