Miscellaneous Civil Works To Prevent Water Logging At 33 Kv S/S Shahpura - Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils Providing and laying in position cement concrete including curing. compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:4:8 (1) cement 4 coarse sand: 8 graded stone aggregate 40 mm nominal size). Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. M20 grade Nominal Mix 1:15:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 16 (1-Cement: 6-Sand) Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in Cement Mortar 1:6 (1-Cement: 6-5and). Grading rool for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design: Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish:20mm thick Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering primer, putty, etc complete in all respect including scaffolding and safety provision New Work Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: one or more coats on old work Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete: Earth work in excavation over areas (exceeding 30cm in depth, 1.5 Mtr. in width as well as 10 Sqm on plan) including disposal of excavated earth with all lead and lift disposed earth to be levelled and neatly dressed: All kind of Soil Providing & fixing precast cement concrete coping 1:2: mix 50mm thick complete as ner specification Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm thick nominal size aggregate. P&F Full-way Valve (IS:778 Mark) or wheel valve of approved make:(-do-) 25mm nominal bore. P&F PVC Storage Tank ISI Marked (IS: 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.l. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-) P& F Bib Cock (IS: 8931 Mark), Superior quality of approved make: Brass 400 gm,15mm nominal bore. P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete: Brass wt. Not less than 300 gm,15mm. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778: 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).25 mm nominal size Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring, 25 Kg. Cl cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth upto 0.5mtr Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. Size 240 Cm. dia outside & 240 Cm. depth. P & F Gun-metal Non-return Valve or Check Valve (IS:Make) of approved make, superior quality:32mm nominal bore. Vertical Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and finished with powder coating and suitable for mounting LED tube including side covers, holders, internal wiring to illuminate the single sided connection LED tube. (Without tube). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR Suitable for 4 LED Tube shape fixture for single rod SITC of Monoblock motor pump set ISI marked (15.9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30 2008, & 1512615 2011 with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase (240-440V) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL/CPRI/ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR. 1.0 HP, 1-0, (10-120)Mtr, (30-12) LPM Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable, & Carry BIS licensing (ie. ISI marking) with down rod up to 80 cm with secondary support safety cable (steel rope), cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to <5) SITC of Radial/mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler, for safegaurd the coupler. The construction material of motor and pump should match 15: 8034: 2018 and 15: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.1./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL/CPRI/ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR 100 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively. 3.0 HP, 1- Ø. (40-170)Mtr, (60-20) LPM Copper Wound Supply, stacking and spreading 40mm crusher broken hard stone aggregate free from katcha stuff deleterious and organic matter as per IRC.MORTH standard specification in 33/11Kv Sub-station yard as per direction of Engineer incharge with all lead and lift.
