|
| 1 | Demolition of brick wall of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 2 | Dismantlingwater tank exc 500 but n exc 1000 ltr complete all as specified and directed. |
| 3 | M & L Brickwork with subclass \"B\" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75 complete all as specified and as directed. |
| 4 | M & L for Brickwork with subclass \"B\" bricks, straight or curved on plan to any radius built in cement mortar 1:4 in half brick thick complete all as specified and as directed. |
| 5 | M & L for 10mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 6 | M & L for rendering or bedding layer15mm thick in cement mortar (1:4) over concrete surfaces of roof, mixed with WPCas per manufacturer\"s instruction including finishing surfaces even and fair without using extra cement complete all as specified and directed.(Note: WPC will be measured and paid separately). |
| 7 | M & L for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 8 | M & L for preparing new plaster surfaces of wall and applying two coats of distemper oil emulsion over a coat of interior wall care putty 3mm thick complete all as specified and directed. |
| 9 | S & F 500 ltr Rotational moulded polythene water storage tank white coloured triple layered (cylindrical vertical with closed top) hoisted and fixed in position on roofs completeas per SSR Part-1 complete all as specified and directed. |
| 10 | Excavation in trenches not exceding 1.5m wide and not exceding 10.0 sqm on plan and not exceding 1.5m depth and getting out soft soil all as specified and directed. |
| 11 | Returing filling in including spreading leveling watering and well ramming in layer not exceding 25 cm as in soil all as specified and dirceted all as specified and directed |
| 12 | Removing excavated material not exceding 50 m and depostingwhere directed at a level not exceding 1.5 m above the starting pointall as specified and directed |
| 13 | Supplying, laying and cushioning river fine sand for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected |
| 14 | Supplying, laying sub class \"B\" bricks old size with axis of the bricks perpendicularto the axis of the cable as in cable protection complete all as specified and directed. |
| 15 | Supply and laying un-reinforced precast concrete cable cover class HVP type 2 with peak size450 mm x 180 mm x 40 mm complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply & Fixingin replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed |
| 17 | Supply andLayingin trenches GI tubing medium grade 25mm bore with all fittings as required size complete all as specified & directed. |
| 18 | S & F 25mm bore gun metal gate valve with iron wheel head screwed both end ISI marked class-II for pipe of following sizes complete all as specified and directed. |
| 19 | Cutting the existing GI line of 100 mm bore in position for insertion of GItee 100x100x50 mm including excavation and earthwork complete. |
| 20 | Supply, laying and testing of HT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts(E) grade with stranded aluminium conductor of size 120 sq mm 3 core including making connection with suitable size of cable gland, aluminium lugs etc complete all as specified & directed. |
| 21 | Material, labour jointing & testing of LT cable XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core including making connection with suitable size of cable gland, aluminium lugs etc complete all as specified and directed. |
| 22 | Supply laying jointing and testing of LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm3.5 Core using lugs/ferrul both end of cable and testing complete all as specified and directed. |
| 23 | Supply laying jointing and testing of LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 Sqmm 3.5 Core using lugs/ferrul both end of cable and testing complete all as specified and directed. |
| 24 | Supply laying jointing and testing of LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3.5 Core using lugs/ferrul both end of cable and testing complete all as specified and directed. |
| 25 | Supply laying jointing and testing of LT cable XLPE insulated ,screened PVC bedded ,galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 Sqmm3.5 Core using lugs/ferrul both end of cable and testing complete all as specified and directed. |
| 26 | Supply laying jointing and testing of LT cableXLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 Sqmm3.5 Core using lugs/ferrul both end of cable and testing complete all as specified and directed. |
| 27 | Supply laying jointing and testing of LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 630 sq mm,single core including making connection with suitable size of cable gland, aluminium lugs etccomplete all as specified & directed. |
| 28 | Supply jointing and testing cable jointing kit for 11 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 120 Sqmm including making connection with suitable size of cable gland, aluminium lugs etc complete all as specified & directed. |
| 29 | Supply, installation, testing and commissioning of transformer suitable for 630 KVA (Level-2) step down floor mounted outdoor type 11/.433, 3 phase, 50 Hz AC, IS: 1180-2014 ISI marked, double wound core type copper wound, oil immersed, air naturally cooled with external cooling tubes, transformer delta connection on HV side and star connected on LV side in accordance with vector symbol Dyn-11 (vector group 4) with neutral brought out on LV side with for earthing and having tapping on HV side for constant out put so as to alter/vary secondary voltage by(Tapping range + 5 %to - 10% in equal step of 2.5 % ) changed by means of manualy operated \" off load\" taps changing gear. The voltage regulation shall be as per IS including first fill of transformer oil as per IS-335 and including all fittings/accessories as specified in SSR Part-I and IS-2026. The limit of temprature rise after continuousfull load run as specified in IS-2026 shall be suitably adjusted to suite the maximum ambient temprature of 55 degree centigrade as prevalent at Bamrauli.The transformer shall be complete with the following fittings and accessories :- |
| 30 | (a) Oil conservator tank with fillings holes and cap filter type drain valve and oil level gauge(b) Silicagel breather with connecting pipe, first fill of dehydrating agent.(c) Explosion relief mounted on tank with double diaphram and equalizer pipe connected to conservator air tank (pressure release valve)(d) Air release valve plug |
| 31 | (e) One cable box on LV side (Secondary) consisting of 04 Nos porcelain bushing with nuts, washers & bushing rods with 01 cable gland suitable for reception of taking out suitable size cable, including gland joint.(f) Explosive vent (g) 01 No 100 mm dial type thermometer vapour pressure type having range 0-120 degree centigrade with max temp indicator and resetting device incl max reading pointer washer etc. (h) Thermometer pocket on tank cover(j) 04 Nos plain solid CI detachable rollers |
| 32 | (k) Two nos Earthing terminals marking plate.(l) Rating plate and terminal marking plate. (m) Extra bushing for neutral outside the cable box brought out on LV side.(n) First filling of oil conforming to IS and tested upto 60 KV dielectric strenght.(o) Lifting lugs(p) Oil drain valve with plug |
| 33 | (q) One cable box on HV side (Primary) consisting of 01 cable gland suitable for reception of taking in HT cable including gland joints.(r ) Hand hole of sufficient size to assess interior of tank(s) Dehydrating breather with first filling of Dehydrating agent(t) Two earthing ofterminal on tank body to facilitate fixing of 32x6mm GI strip.(u) Rating plate with terminal marking plate(v) Inspection cover. |
| 34 | (w) Extra bushing for neutral out side the LV side(x)PCC plateformshall be provided as per drg No CEAF/TD/EM/03, complete all as specified including XPM welded mesh fencing and doors including 75 x 40 mm channel.Note:- (i) Anything missed above but is required for efficient functioning of transformer is deemed to be included in the quoted rate(ii) Full load testing shall be done at site. The artificial load shall be arranged by contractor. This is included in above quoted rate. |
| 35 | Supply and fixing industrial Air Cooler 18000CMH/ 10600 CFM, Air Dischargetop/down,capacity 2.2KW,1440 RPM speed single phase 230 V ,single speed control sysyem ,Size of cooler 1100mm x 1100mm x 980mm ,airout let size 670mm x 670mm ,water tank capacity 30 Ltr, weight 70kg ,cooling pad size 670mm x 770mm x 100mmand fan blade axial type with 3 leaf of size 600mm and stater for cooler includingconnection complete all as specified and directed. |
| 36 | Supply and fixing of fabricated rectangular sheet metal Duct & Accessories of 24 gauge including nuts, bolts and insulation pad complete all as specified and directed. |
| 37 | Supply and fixing air grill double deflection complete all as specified and directed. |
| 38 | M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor and making good disturbed surfaces with cement mortar and paintto match existing surface complete all as specified and directed.. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit) |
| 39 | M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor and making good disturbed surfaces with cement mortar and paintto match existing surface complete all as specified and directed.. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit) |
| 40 | Supplyinstallation commissioning and testing of 1.5 TR window type air conditioner electric driven (single phase) with cordless remote control unit and in built air ioniser, plasma filter for better indoor air quality, five star rated suitable for window, single phase, 230/250 volt AC, refrigerant gas R32, cooling capacity 4500K cal per hour(1.5 Ton), ISEER value 3.58, BEE 5 Star rated, making necessary connections unplasticised PVC pipes medium duty 25 mm dia for draining out condensed water all as required including necessary connection complete all as specified and directed.Note :- (i) Quoted rates deem to be included cost ofdrain pipe, copper tubing and 4 sqmm multi standard copper cable (all 3 mtr length) , backet, fixing arrangment in windowl etc. additional length shall be measured and paid separately.(ii)Installation and commissioning to be done through OEM / itsauthorised service centre / agency. |
| 41 | Supply install and testing 5 KVA capacity Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed. |
| 42 | M& L for point wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 1.5 Sq. mm (nominal area), single core,insulated and unsheathed stranded cable 1100 Volts grade ISI-694 markedin & including heavy duty, electric resistance welded(ERW) stove enameled surface mounted conduit,heavy duty ISI marked as per IS:9557 (Part I) 1980 forlight points controlled by one Switch , includingHFFR insulated unsheathed unitary construction copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. Note:-Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. |
| 43 | Supply and fixing flame proof rotary type with termination box in LM6, 16 Amp, single pole 250V complete all as specified and directed. |
| 44 | Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 45 | M & L for sub main wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 4.00 Sq. mm (nominal area), single core,insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked& including heavy duty, electric resistance welded (ERW) stove enamelled surface mounted conduit,heavy duty ISI marked as per IS:9557 (Part I) 1980h , includingHFFR insulated unsheathed unitary construction copper conductor 4.00 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. Note:- (a) Two runs of4.0 sqmm cable and one run of 4 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. |
| 46 | Supply & Fixing exhaust fan flameproof 305 mm size 1500 rpm 1250 CFM , copper winding, power factor not less than 0.9and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with flameproof conduit with 3 core 1.0 Sqmm flameproof wire and including writing MES No complete all as specified and as directed. |
| 47 | S & F MCB DB flame proof type 4 way ,220 V ,50 Hz, comprising 200 amps bus bar ,neutral link, earth link complete all as specified and directed. |
| 48 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittingsincluding Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:-Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring. |
| 49 | One light, fan, bell point controlled by one switch. |
| 50 | One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 51 | Ditto all as above item 43 here in before but with 2.5 sqmm copper conductor cable for One 5 Amps socket outlet on independent board. |
| 52 | Ditto All as above item 43 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size. |
| 53 | M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 54 | Supply and fixing Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish complete all as specifiedand as directed. |
| 55 | M & L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge. |
| 56 | M & L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 57 | S & F ceiling rose surface backlite 65x50mm, 3 terminals complete as specified and directed by Engineer in charge. |
| 58 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 59 | Supply and fix exhaust fan steel body, heavy duty, double ball bearing, Copper woundedcomplete with louvers shutter, 230 volt AC, single phase, 50 Hz, 1400 RPM, 300 mm sweepwith blades, steel frame complete all as specified and directed. |
| 60 | Supply and fixing factory made epoxy powder coated distribution board vertical TPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed. |
| 61 | Supply and fixing MCB triple pole & neutral 240 volt \"C\" curve 10 KA 40 to 100Amps complete all as specified and directed . |
| 62 | Supply and fixing MCB TPN 40 to 63 Amp 415 volt \"C\" curve 16KAAmps complete all as specified and directed . |
| 63 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 64 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles & Neutraland current carrying capacity 40 to 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 65 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6.3mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground lev el with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.5 of SSR part I and earth wire protected by galvanized pipe light grade 40mm bore and thorugh test point including necessary earth work and excavation in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chember with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed and testing on completion. |
| 66 | Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia asearth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point, electric plateof SSR Part I completeall as specified and directed and testing on completion. |
| 67 | Note:-(i) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (ii) Item includes the cost of 7.5 metre earth lead wire andGI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.(iii) Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. |
