|
| 1 | PACKAGE NO. KR 03-27(B) PMGSY Idukki District Balance work of Peringassery Cheppukulam Road (4816m) |
| 2 | SITE CLEARANCE |
| 3 | 2.1 Clearing Grass and Removal of Rubbish - Clearing grass and removal of rubbish upto a distance of 30m outside the priphery of the area as per technical specification Clause 200.1 |
| 4 | PAVEMENT COMPONENTS |
| 5 | 3.5.3 Excavation in soil using Hydraulic Excavator and Tippers with disposal upto 1000m- Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location with a lift upto 1.5m and lead upto 1000mas per technical specification Clause 302.3 |
| 6 | 3.3 Construction of embankment with material obtained from Roadway cutting - Construction of embankment with approved material deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification Clause 301.5 |
| 7 | 4.1.A.1Granular Sub-base with Well Graded Material (Table 400.1) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401. (For Grading I Material) |
| 8 | 4.7.2.A Water Bound Macadam Sub-base / Base- WBM Grading II- By Mannual means - providing, laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screenings/ binding material to fill up the interstices of course aggregate, watering and compacting to the required density grading 2 as per technical specification Clause 404 |
| 9 | 4.7.3.A Water Bound Macadam Sub-base / Base- WBM Grading III- By Mannual means - providing, laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screenings/ binding material to fill up the interstices of course aggregate, watering and compacting to the required density grading 3 as per technical specification Clause 404 |
| 10 | 5.1.1aPrime Coat - Low porosity-providing and applying primer coat with bitumen emulsion (Packed SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at a rate of 0.70 - 1.00 kg/sqm using mechanical means as per technical specification clause 502 |
| 11 | 5.2.3aTack Coat - Providing and applying tack coat with bitumen emulsion (Packed RS-1) using emulsion distributorat a rate of 0.25 - 0.30 kg/sqmon the prepared granular surface treated with primer &cleaned with Hydraulic broom as per technical specification clause 503 |
| 12 | 5.9.1.2a20mm thick open graded premix carpet using bituminous binder S65 ( packed)- Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn roller, finished to required level and grades to be followed by seal coat either Type A or Type B or Type Cas per technical specification clause 508 - Using Bitumen (S65) Packed by Mannual means |
| 13 | 5.12. A 3.5 Seal Coat - Manual Means - Type C - Providing andlaying seal coat sealing the voids in bituminous surface laid to the specified levels, levels and cross fall using Type A, Type B and Type C as per technical specification clause 510- UsingBitumen - (S65)-Packed |
| 14 | STRUCTURES |
| 15 | 11.1.1.1Excavation for Structures -Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material : Ordinary soil : Upto 3 m depth |
| 16 | 11.4.1.1PCC Grade M 10 - Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:3:6. |
| 17 | 12.5.1.1 PCC Grade M 15 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2.5:5 |
| 18 | 11.4.3.1 PCC Grade M 20 - Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 |
| 19 | RCC Grade M 25 - Providing concrete for plain/reinforced concrete in sub structure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- |
| 20 | 12.7 Supplying, fitting and placing TMT bar reinforcement in sub structure - complete as per drawings and technical specifications Clauses 1000 and 1202 |
| 21 | 3.19.1.A Surface Drains in Soil- Construction of unlined surface drains of average cross sectional area 0.40sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3.0m and lead of 50m as per technical specification Clause 307 - By Mannuall Means |
| 22 | 12.3 Plastering with cement mortar 1:4 as per drawing and technical specification clauses 613.4 and 1204 |
| 23 | 10.5 Painting two coats icluding primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical Specification |
| 24 | TRAFFIC SIGNS, MARKING ETC. |
| 25 | 10.16Providing and Fixing \"Logo\" of PMGSY Project - Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 26 | 10.10.2 Kilometre Stone- Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and priming etc.as per drawing and technical Specification clause 1703 - OrdinaryKilometre stone (pre-cast) |
| 27 | 10.10.3 Kilometre Stone- Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and priming etc.as per drawing and technical Specification clause 1703 - 200m stone (pre-cast) |
| 28 | 10.1.2 Printing new letters and figures of any shade - printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give a even shade as per drawings and technical specifications clause 1701- English and roman |
| 29 | 10.11 Boundary Piller- Reinforced cement concrete M15 grade boundary pillers / local stone of standard design as per IRC:8 fixing in position including painting and priming etc.as per drawing and technical Specification clause 1704 |
| 30 | PVC WHEEP HOLES - Providing weep holes using 75mm dia PVC pipes 4 kg/sq cm including cost of material , labour charges etc. complete . |
| 31 | Total Construction cost |
| 32 | Maintenance for 5 years |
| 33 | Maintenance for first Year after completion |
| 34 | Maintenance for second Year after completion |
| 35 | Maintenance for third Year after completion |
| 36 | Maintenance for fourth Year after completion |
| 37 | Maintenance for fifth Year after completion |
| 38 | Total Maintenance cost |
