Tender For Augmentation Of Ghorawal Nagar Panchyat Water Supply Scheme In District- Sonebhadra Under Amrut- 2.0
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Jan 2025
0 days left
EMD
14 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ghorawal → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Augmentation of Ghorawal Nagar Panchyat Water Supply Scheme in District- Sonebhadra Under AMRUT- 2.0
BOQ
| Sl. No. | Item Description |
| 1 | Rising Main |
| 2 | Supply, Carting, laying and Jointing of following size of pipes as per IS-8329/2000 or CPHEEO MANUALSits latest amendments including their jointing materials and freight, taxes, insurance charges and Including Supply of all DI specialssuch as MJ joints, Tee, bends, all requiredmild steel fabrication works(in case of MS fabrication if required, proper protection treatment against corossion must be done)and it appurtunent work etc. required Proper laying into trenches and jointing, Hydro sectional testing of following dia pipe line all complete as per instructions of Engineer- in- charge. |
| 3 | 100mm DI Pipe Class K-9 |
| 4 | 200mm DI Pipe Class K-9 |
| 5 | Supply, Carting, laying and jointing of following sizes of CI D/F Sluice valves and its specials as per IS-780-1960 tested to 10Kg / Cm2 store to site of work lowering the same into trenches and fixing in position and jointing the same with supply of all materials and testing etc. complete as per instructions of Engineer- in- charge. |
| 6 | 100mm |
| 7 | 200mm |
| 8 | Excavation of earth for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering, ramming of the excavated earth into the trench and also disposal of surplus earth upto 5km from the center of the trenches including supply of all material labour, T&P etc complete as per instructions of Engineer -in -charge.(including repair of damaged utilities such as sewer connections/water connections/telephone lines, water and sewer pipelines, electric lines etc all. No seperate payments will be done.) |
| 9 | In Ordinary soil |
| 10 | In Moorum /Kankar / Shingle etc. |
| 11 | Inrock. |
| 12 | Construction of masonary type sluice valve chamber. Inner Size of (1mx1mx1m)including supply of all materials, labours, T&P etc. Required for proper completion of work. |
| 13 | THRUST BLOCK Construction of RCC (M-20) thrust blocks inclding 1% rainforcement of volume of concrete at the bends etc. complete for following size including Supply of all material, labour, T&P etc. Required for proper completion of work. |
| 14 | For 100 mm 0.55 x 0.55 x 0.55m |
| 15 | For 200 mm 0.85 x 0.85 x 0.85m |
| 16 | Dismantling of road including supply of labour, materials, T&P etc. Disposal of Garvage/Malava upto the distance of 5km center of work required for proper completion of work as per instructions of Engineer-in-charge. |
| 17 | Bituminous Road |
| 18 | CC Road |
| 19 | Interlocking Road |
| 20 | Reinstatement of following types of roads with materials including supply of labour, materials, T&P etc. required for proper completion of work and including Execavation, Drassing, Watering, Camming, Compaction, Disposal of excavated materials. |
| 21 | Bituminous Road (Local sand 200mm thick, GSB & WMM- 300mm thick, DBM- 50mm thick, BC- 25mm thick) |
| 22 | CC Road [Local sand 200mm thick, PCC (1 : 4 : 8)- 100mm thick, CC (1:1.5:3)- 150mm thick] |
| 23 | Interlocking Road - [80mm thick M-30 Grade Interlocking paver, Local sand 50mm thick, GSB- 200mm thick jointing filling with local sand]- 50% Old & 50% New tiles. |
| 24 | Provision for crossing of Nala/Culvert including making specials and supply of all materials, labour, T&P etc. Required for proper completion of work. |
| 25 | Pump house for Tubewell |
| 26 | Construction of pump house cum chloronome of size (3.6m*3.0m*3.0m/2.6m*1.8m*3.0m) with stilling chamber for tubewell, with byepass chamber including supply of all materials, labours T&P etc. Required for proper completion of work. |
| 27 | Construction of RCC Clear Water Reservoir (CWR)cum pumphouse.CWR- with Inner side food graded apoxy painting and outer side weather coat painting including all arrangments , fittings(washout, overflow,inlet,outlet pipe),around rcc drains, SS-316 ladder inside and stair outside, ventilation system, 32 mmDIA. GI RAILLING 3 rows, LEVEL INDICATORS etc.supply of all Materials, Labours, T & P etc. Required for proper completion & commissoningof workas per design - drawing and as per instruction of Engineer-in-charge. |
| 28 | RCC CWR under Zone-1 (50KL) |
| 29 | RCC CWR under Zone-2(100KL) |
| 30 | Pumphouse- Construction of pump house cum LCS room With AC above 50 KL CWR of 5 mts height at site at Zone-1 including supply of all materials, labours, T&P etc. Required for proper completion of work as per design and drawing and as per instruction of Engineer-in-charge. |
| 31 | Pumphouse- Construction of pump house cum PLC/MCS Room With AC above 100 KL CWR of 5 mts height at site at Zone-2including supply of all materials, labours, T&P etc. Required for proper completion of work as per design and drawing and as per instruction of Engineer-in-charge. |
| 32 | Repairing and painting of existing OHT 450 KL/17m in zone-1 including repairing of Seepage in bottom dome, repair/replacement of MS ladder, repair of Floor, Drain, Railing pipe/Railing post, Lightening conductor, Level indicator, Ventelator chamber, repair/replacement of Mosquito Jali and Painting of existing OHT 450 KL/17m including Removing of old paints/ Water Proofing cemets paint and Scrapping, Sand papering, Prepairing the surface smooth and finishing of wall/concrete surface with two coat primium acrylic exterior paint with one coad primer and steel pipe work with two coad emulsion paint including scaffolding, all material, labour, T&P etc. Required for proper completion of work. |
| 33 | Repairing and painting of existing OHT 400 KL/17m in zone-2 including repairing of Seepage in bottom dome, repair/replacement of MS ladder, repair of Floor, Drain, Railing pipe/Railing post, Lightening conductor, Level indicator, Ventelator chamber, repair/replacement of Mosquito Jali and Painting of existing OHT 400 KL/17m including Removing of old paints/ Water Proofing cemets paint and Scrapping, Sand papering, Prepairing the surface smooth and finishing of wall/concrete surface with two coat primium acrylic exterior paint with one coad primer and steel pipe work with two coad emulsion paint including scaffolding, all material, labour, T&P etc. Required for proper completion of work. |
| 34 | Distribution system |
| 35 | Supply, carting, laying and jointing of following type/class and sizes of DI pipe Class K-7 (IS-8329/2000) or their latest amendments /CPHEEEO MANUALS with rubber gasket and allSpecials, jointing material such as Tee, Bends, Scockets, tail piece, MJ, end-cap, all requiredmild steel fabrication works(in case of MS fabrication if required, proper protection treatment against corossion must be done) etc all including FOR destination and insurance etc. with loading, unloading & stacking all complete. DI pipe Class K-7 (IS-8329/2000) including lowering, jointing, Interconnections from Old (existing) pipeline to New pipeline,Hydro sectional testing etc complete as per design and drawing and as per instructions of Engineer-in-charge. |
| 36 | 100mm dia |
| 37 | 125mm dia |
| 38 | 150mm dia |
| 39 | 200mm dia |
| 40 | 250mm dia |
| 41 | 300mm dia |
| 42 | Excavation of earth for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering, ramming of the excavated earth into the trench and also disposal of surplus earth upto 5km from the center of the trenches including supply of all material labour, T&P etc complete as per instructions of Engineer -in -charge. (including repair of damaged utilities such as sewer connections/water connections/telephone lines, water and sewer pipelines, electric lines etc all. No seperate payments will be done.) |
| 43 | In Ordinary Soil |
| 44 | In Moorum /Kankar / Shingle etc. |
| 45 | In rock. |
| 46 | Supply, carting, laying and jointing of following types of fittings including railway freight, cartage from store to site of work, all taxes and duties etc. complete. CI D/F Sluice Valves, Scour Valve Class-I as per IS 780 (1969) suitable for a working pressure of 10 Kg / Sq.Cm. including lowering, fixing and jointing of fittings in trenches. |
| 47 | 100mm dia |
| 48 | 125mm dia |
| 49 | 150mm dia |
| 50 | 200mm dia |
| 51 | Scour Valve 100mm dia |
| 52 | Fire Hydrant 80mm Dia |
| 53 | Air Valve 25mm Dia |
| 54 | Construction of following type chambers as per design with supply of all materials, labour, T&P etc. Required for proper completion of work as per instructions of Engineer-in-charge. |
| 55 | S.V. Chamber (Surface Box Type- C.I.) |
| 56 | S.V. Chamber (Masonary Type) |
| 57 | Air Valve Chamber |
| 58 | Fire Hydrant Chamber |
| 59 | Dismantling of road including supply of labour, materials, T&P etc. Disposal of Garvage/Malava upto the distance of 5km center of work required for proper completion of work as per instructions of Engineer-in-charge. |
| 60 | Bituminous Road |
| 61 | C.C. Road |
| 62 | BOE Road |
| 63 | Interlocking Road |
| 64 | Reinstatement of following types of roads with materials including supply of labour, materials, T&P etc. required for proper completion of work and including Execavation, Drassing, Watering, Camming, Compaction, Disposal of excavated materials. |
| 65 | Bituminous Road (Local sand 200mm thick, GSB & WMM- 300mm thick, DBM- 50mm thick, BC- 25mm thick) |
| 66 | CC Road [Local sand 200mm thick, PCC (1 : 4 : 8)- 100mm thick, CC (1:1.5:3)- 150mm thick] |
| 67 | BOE Road - 50% New & 50% Old Used Brick (200mm thick local sand and jointing filling with local sand) |
| 68 | IL Road - [80mm thick M-30 Grade Interlocking paver, Local sand 50mm thick, PCC (1:4:8)- 100mm thick jointing filling with local sand]- 50% Old & 50% New tiles. |
| 69 | Provision for crossing of square drain.(0.50m to 1.5 M) including Supply of all material, labour, T&P etc. Required for proper completion of work. |
| 70 | Provision for NALLA/CULVERT CROSSING UPTO AV. 200MM DIA PIPE CROSSING including Supply of all material, labour, T&P etc. Required for proper completion of work. |
| 71 | Provision for NALLA/CULVERT CROSSING UPTO AV. 300MM DIA PIPE CROSSING including Supply of all material, labour, T&P etc. Required for proper completion of work. |
| 72 | THRUST BLOCK Construction of RCC (M-20) thrust blocks inclding 1% rainforcement of volume of concrete at the bends etc. complete for following size including Supply of all material, labour, T&P etc. Required for proper completion of work as per instructions of Engineer-in-charge. |
| 73 | 100mm (0.55m*0.55m*0.55m) |
| 74 | 125mm (0.60m*0.60m*0.60m) |
| 75 | 150mm (0.70m*0.70m*0.70m) |
| 76 | 200mm (0.85m*0.85m*0.85m) |
| 77 | 250mm (1.00m*1.00m*1.00m) |
| 78 | 300mm (1.15m*1.15m*1.15m) |
| 79 | Shifting of Under ground/Overhead Utilities- Provisionforshifting &reinstatement ofutilities e.g.electric &telephone cable/poles, waterlines drains etc. during excavation & laying of Water pipeline. |
| 80 | REPARING OF EXISTING WATER WORKS |
| 81 | Repair including Construction of Damaged boundary wall hight- 1.5m above DPC, foundation innot less than 60cm depth and plinth not less than 60cm with Brick work (1:4) cement and coarse sand including supply all materials, labour, T&P etc. complete as per instructions of Engineer-in-charge. Along with repair of existing Pumphouse of TW including supply of all labour and t&p etc all. |
| 82 | Removing of old painted surface if any, cleaning of surface, Painting work with weather coat (Acrallic paint) approved quality of paints on wall both side of boundrywall and existing pumphouse with two coat incluting all materials, labour, T&P etc. Complete as per instructions of Engineer-in-charge. |
| 83 | Painting or varnishing ofiron or wood with one coat of priming and two coats of approved paint & varnish including supply of all materials, labour, T & P etc; required for proper completion of the work as per instructions of Engineer-in-charge. |
| 84 | 12mm thick plaster with cement and coarse sand mortar in 1:4 over brick work including supply of all materials, labour T&P etc. complete as per instructions of Engineer-in-charge. |
| 85 | Construction of Cement Concrete (CC Road) type approach road including supply of all materials, labour, tools and plants etc. complete as per instructions of Engineer-in-charge(including dismentaling, removing and cleaning of old damaged road surface/ structures if any and preparation of subgrade as per specification mentioned in BID Doc. No seperate payments will be done). |
| 86 | PROPOSED NEW WATER WORKS CAMPUS |
| 87 | Construction of Brick Boundary wall 1.5m height,Foundation not less than 60cm depth and plinth not less than 60cm with RCC Column 2.5m centre to centre M-30 with pcc 1:4:8 100 mm thick, First class Brick WORK 1:4 cement and coarse sand,12mm thick plaster 1:4 cement and coarse sand,Two coat painting Apex ultima alround water works compound andcomplete including supply of all materials, labour, T&P etc. complete required for proper completion of the works as per instructions of Engineer-in-charge. |
| 88 | Supply and fixing of 3.6 M wide gate including fabrication and supply of steel and construction of boundary pillars etc. complete. |
| 89 | Construction of Cement Concrete (CC Road) type approach road including supply of all materials, labour, tools and plants etc. complete as per instructions of Engineer-in-charge.(including dismentaling, removing and cleaning of old damaged road surface/ structures if any and preparation of subgrade as per specification mentioned in BID Doc. No seperate payments will be done). |
| 90 | Filling of earth at lower portion including leveling and dressing at water works. |
| 91 | Provision for arboriculture for development of water works as per instructions of Engineer-in-charge. |
| 92 | Staff Quarter Construction of one room set staff quarter with bothroom & kitchen, Sockpit/Saptick tank as per departmental specification and includingallmateials labours T & P etc. as per drawing Single Room Quarter at Zone-2 water works campus. |
| 93 | Ground Water RechargeConstruction of ground water recharge including Supply of all materials, labour, T&P and provide arrangement for ground water recharge. At zonal water works as per instructions of Engineer-in-charge. |
| 94 | Making House Connection should be done from existing distribution pipe line to outer wall of house or 2.0 m inside the boundary wall with provision of tap including supply of 7.0 m HDPE Pipe 20mm dia, PN- 12.5, PE-100, SDR-6 (0.6m depth below ground level), and 4.0m 15mm dia (ID) G.I. Pipe, Class-B and keeping the G.I. pipe atleast 1.0m in height above the G.L. as per department type design and Drowing including supply of specials, saddle, clamps etc. of suitable size, ISI mark 6mm BRASS FERRULE conforming to latest/relevant I.S. 2692/1989 or their latest amendmen, BRASS Tap, all Materials, labours, T&P etc. complete, Dismentelling of all type of road surface, breaking of all type of floor, wall, and disposal of unserviceable materials up to 5km. Excavation pit/trench, cutting of pipe, Bailing out of water, carting and lowering them unto the already prepared trenches, fixing in position and jointing them with pipelines and testing etc, Grounting by CC 150mm x 150mm x 150mm size in M20, Restoration of pit, trench/Road(as site condition NON PAVED, BOE, CC, INTERLOCKING BRICKS road, RAMP, DRAIN, WALL, FLOOR etc.) as per PWD/UPJN SPECIFICATION and 3 nos GPS location colour photographs submitted after complition of work. Also including GIS Based Survey to collect all required data in projected area Nagar Panchyat Ghorawal, District-Sonebhadra for proper complition of work as pe drawing and. As per Instruction of Engineer in charge. |
| 95 | New Connections with New pipe line. |
| 96 | Shifting of Existing House Connection from Old Pipe line to New Pipe Line |
| 97 | Construction of New Tubewell- 8 nos. |
| 98 | Transportation of Rig machine & T&P/ equipments to the site of work including loading,unloading,barricting,erection and dismantling etc.. |
| 99 | Drilling upto 200mtr. and Lowering of Tube Well Tubewell Assembly |
| 100 | Drilling of 450 mm. Dia bore by DC method from GL to 50 Meter BGL.(50Mtrs X 8 no.=400 Mtr) |
| 101 | Drilling of 165/163 mm. Dia bore by DTH method from 50Meter BGL to 200 Meter BGL.(150 Mtr X 8no.=1200 Mtr) |
| 102 | Logging of bore hole by deparmental / Approved electric logger |
| 103 | Zone Testing in water quality problem area including all required material. Labour, T&P and resistivity survey etc complete in all respect |
| 104 | Tube Well Assembly |
| 105 | MS tubewell assembly with all required parts like plain pipe, slotted pipe (as required up to 50% of plain pipe), rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & as per typed design complete in all respect.- 200 mm dia. |
| 106 | Lowering of Tube well assembly duly welded including welding electrode and shrouding of pea gravel complete in all respect. |
| 107 | GL to 50 Mtr BGL 200 mm dia. |
| 108 | Development of Tube Well |
| 109 | Transportation, Installation andDismentalling of 250 PSICompressor including loading ,unloading with all labour T&P. |
| 110 | Development of tubewllbore by 250 PSI air compressor as per IS -11189including cutting of bore cover ,rewelding of cover after complete work and with all required material ,laboure T& P. |
| 111 | Transportation, Erection and Dismentalling of 1.0 cusec OP Unit and yield test includingcutting bore cower ,rewelding ,loading ,unloading with all labour T&P. |
| 112 | Development of Tubewll bore as IS 2800by 1.0 cusec OP Unit including cutting of bore cover,reweldingwith all required material ,laboure T& P. |
| 113 | Chemical and bacteriological test of water sample from departmental approved lab. |
| 114 | Pea-Gravel |
| 115 | Supplyand filling of Lal Kuan Pea-Gravel size 1.6 mm to 4.8 mm. duly screened and washed as per IS 4097 . |
| 116 | Pumping Plants at CWR Zone-1 and CWRZone-2 |
| 117 | SITC of Horizantal submersible Pumping Plantsuitable to operate 415+5% volt,50Hz,3phase A.C. supply (as per IS including starter,soft panel, cable, complete in all respect with all required material T&P labour, Tools in Kit, etc. (1000 LPM , 30 m Head ) 1W+1S |
| 118 | SITC of Main piping & Valves(150mm dia) with 24 mtr. Column pipe,Sluice valves,Reflex valves for indivisiusal pumps ,Reflex valve for common header,Tee,Bend,Rubber packing, electronic type chlorinating plant, Painting,wiring of pump house (internal & external),Earthing of electrical equipment, complete in all respect with required material, T&P labour, chain pully(2Ton) and Pressure gauges,with complete accessories. |
| 119 | Testing of pumping plant at Manufactures site. |
| 120 | Pumping Plants at Zone-1(Tubewell no. 1,2,3) andZone-2(Tubewell no. 4,5,6,7,8) |
| 121 | SITC of Pumping Plant includingsuitable to operate 415+5% volt,50Hz,3phase A.C. supply (as per IS 8034-1989)starter, panel, cable, complete in all respect with all required material T&P labour, Tools in Kit etc. (200 LPM , 70 m Head , 2900RPM, 7.5 H.P) |
| 122 | SITC of Main piping & Valves(80mm dia) with 24 mtr. Column pipe,Sluice valves(2nos),Reflex valves(1no),Tee,Bend,Rubber packing, electronic type chlorinating plant, Painting,wiring of pump house (internal & external),earthing of electricals equipment complete in all respect with required material, T&P labour, chain pully (2Ton)and Pressure gauges,Airl line,Depth gauge,100Amp Kit Kat.fuse unit with vlot meter fitted in ply board and ms angle with complete accessories. As per tender document. |
| 123 | Additional column pipe in 3 m length each heavy duty double flange.(12 X8No.) |
| 124 | Testing of pumping plant at Manufactures site. |
| 125 | 20 KVA Stabilizer for pumping plantsSITC of Servo voltage stabilizer oil cooled having capacity 20 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240 -440 output voltage 415 volt +/- 1% withearthlingand power cable ,change over switch etc. all Complete works. |
| 126 | SCADA for Zone-1 CWR |
| 127 | CE & UL approved manufacturer’s RTU/ PLC in IP 65 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewellto store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations as per instruction of Engineers-in-charge. |
| 128 | G.S.M./G.P.R.S. based wireless communication with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plantas per instruction of Engineers-in-charge. |
| 129 | Soft staterWith RS 485 Part-400V Class,15 KW,rating |
| 130 | CE / UL certified Intelligent smart energy meter |
| 131 | Motor OperatedActuator with Sluice Valve (150mm) |
| 132 | Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) |
| 133 | CE / UL certified Ultrasonic water level transmitter for CWR. |
| 134 | CE / UL certified Pressure Transmitter |
| 135 | CE / UL certified Surge protector for control panel |
| 136 | Control pannel with IP 54 protection industrial grade for all equipment sprate for control 24 V and power equipment. |
| 137 | CE / UL certified 7\" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters |
| 138 | Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT |
| 139 | Installation, commissioning & testing of Scada and automation. |
| 140 | Test and trial run for 3 Months period . |
| 141 | SCADA for Zone-2 CWR |
| 142 | CE & UL approved manufacturer’s RTU/ PLC in IP 65 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewellto store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations |
| 143 | G.S.M./G.P.R.S. based wireless communication with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant |
| 144 | Soft staterWith RS 485 Part-400V Class,15 KW,rating |
| 145 | CE / UL certified Intelligent smart energy meter |
| 146 | Motor OperatedActuator with Sluice Valve (150mm) |
| 147 | Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) |
| 148 | CE / UL certified Ultra sonicwater level transmitter for CWR. |
| 149 | CE / UL certified Pressure Transmitter |
| 150 | CE / UL certified Surge protector for control panel |
| 151 | CE / UL certified 7\" HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters |
| 152 | Control pannel with IP 54 protection industrial grade for all equipment sprate for control 24 V and power equipment. |
| 153 | Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse and OHT |
| 154 | Installation, commissioning & testing of Scada and automation. |
| 155 | Test and trial run for 3 Months period |
| 156 | SCADA for DMA at OHT |
| 157 | Zone 1 |
| 158 | SITC of Double Solenoid Flow control Valve size 300mm dia |
| 159 | SITC of CE & UL certified Electomagnetic Flowmeter for OHT line size 300 mm. dia. |
| 160 | SITC of Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system . |
| 161 | SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. |
| 162 | SITC of CE / UL certified Radar type level transmitter for OHT with installation |
| 163 | Zone 2 |
| 164 | Double Solenoid Flow control Valve size 200mm dia. |
| 165 | CE & UL certified Electomagnetic Flowmeter for OHT line size 200 mm. dia. |
| 166 | SITC of Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system . |
| 167 | SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. |
| 168 | SITC of CE / UL certified Radar type level transmitter for OHT with installation |
| 169 | Trial- Run 03 Months and Hand over to Nagar panchayat |
| 170 | Trail & Run for Pumping plant for three month for Zone -2 CWR including Consumption of Electricity bill, Chlorine etc. all required as per site during trail run period. |
| 171 | Trail & Run for Pumping plant for three month for TubewellsZone -2 including Consumption of Electricity bill, Chlorine etc. all required as per site during trail run period. |
| 172 | Trail & Run for Pumping plant for three month for Zone -1 CWR including Consumption of Electricity bill, Chlorine etc. all required as per site during trail run period. |
| 173 | Trail & Run for Pumping plant for three month for TubewellsZone -1 including Consumption of Electricity bill, Chlorine etc. all required as per site during trail run period. |
AI Tender Summary
Tender Timeline
Dec 31, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 15, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 15, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender