|
| 1 | Comprehensive Maintenance/ Repair and servicing of Mechanical laundry machines installed at Base Hospital, Delhi Cantt-10, electrically operated , to provide trouble free service to the users for24 hours including Sunday / holidays such as function ofall controlling relays, Sensors , Valves etc.completeall as specified and as directed. AMC shall be got done by the contractor through OEM / authorised service agents of OEM only. The Contractor will not be at liberty to change the authorised service agent subsequently without concurrence of the Department. The Contractor shall have MOU from OEM i.e. M/s Fabcare / authorised service agents of OEM only and shall produce the same to the department before commencement of work. There is no maximum limit for inspection and Testing /Attanding breakdowns as per site condtions / as specified by department. Quoted rate includes Inspection and Testing of equipments during breakdown / On call basis for making the system/ Plant functional as per OEM standards, No extra payment will be done forsame. An MOU between OEM (M/S Fabcare)/ authorised service agents of OEM and contractor shall be uploaded while uploading tender Documents.Details of machines as follows:-Details of Machines:- (a) Industrial washer extractor machine 120 KG Capacity 415 Volt AC - 04 Nos (b) Industrial washer extractor machine 60 KG Capacity 415 Volt AC - 02 Nos (c) Industrial washer extractor machine 30 KG Capacity 415 Volt AC - 01 Nos (d) Drying Tumbler Machine Front Loading 60 Kg 415 Volt AC - 07 Nos (e) Flat work Ironer 830 Mm X 3300 MM, 415 Volt AC- 02 Nos (f) Industrial Flat Bed Press, 415 Volt AC - 02 Nos (g) Industrial genral utility press, 415 Volt AC - 02 Nos (f) Industrial Vaccum steam ironing finishing Table with Iron 1250 MM X 750 MM, 415 Volt AC -05 Nos |
| 2 | Note :-Scope of work Includes following:-(a) Conduct the routine checking of all Machines once in month or as when required as per breakdown/Trouble shooting as required at site including necessary T & P. (b) Generate reports about condition of machine and listout the spare parts if required, to be replaced. Contractor submit monthly inspection report of all machines inspected by OEM or authorised service agency.(c) Replacement of minor spare parts like indicating lamps in panel boards, switches, push button, Small piece of control panel wire , cleaning of panel boards,Buffing of Steel surface and general cleaning of all laundry machines, controlling relay, sensors, checking of machine as per electrical/ mechanical aspect etc as required to make system functional. (d) Contractor has to arrange necessary T & P as per scope of work .(e) Contractor has to arrange necessaty T & P for repair work as per scope of work.(f) Contractor has to attend the complaints from Department with in 24 Hrs irrespective of Sunday/ Holiday /nature of complaints.(g) The unit rate quoted shall be deemed to be included the elements of labour and minor repair for rectifying and making the machine functional. If replacements of parts / items is required to make the equipment/machinefunctional the cost of labour and material for the same shall be measured and paid for as \" S & F in repairs\" under relevant items of this schedule here in after.(h) If brekdown will not be attended & rectified on same day as recived by the contrcator, the recovery will be made @Rs 500/- per breakdown per Hr on first day & will be multiplied day by day till the rectification. |
| 3 | S&F in replacement Main Water Inlet Valve (Actuator Butterfly Valve) suitable for Washer Extractor - 120 Kg capacity, Make- FABCARE,complete all as specified and as directed. |
| 4 | All as per item No 2 here-in-before but Main Steam Inlet Valve Automatic. |
| 5 | All as per item No 2 here-in-before but Main Drive Aluminium Pulley. |
| 6 | All as per item No 2 here-in-before but Main Bearing Circlip. |
| 7 | All as per item No 2 here-in-before but Pneumatic Fitting (Tee, Elbow, Connector). |
| 8 | All as per item No 2 here-in-before but Pneumatic Pipe. |
| 9 | All as per item No 2 here-in-before but Clamps 4\" Heavy Fabricated S.S. |
| 10 | All as per item No 2 here-in-before but FRL Set. |
| 11 | All as per item No 2 here-in-before but S.S Screws (For Main Cover). |
| 12 | All as per item No 2 here-in-before but Allen Key Bolt for main Housing. |
| 13 | All as per item No 2 here-in-before but Door Lock Latch Handle. |
| 14 | All as per item No 2 here-in-before but Thermo Couple. |
| 15 | All as per item No 2 here-in-before but VFD (Variable Frequency Drive). |
| 16 | All as per item No 2 here-in-before but Display Controller (AXW Controller). |
| 17 | All as per item No 2 here-in-before but bearing housing. |
| 18 | All as per item No 2 here-in-before but main bearing housing seal cover. |
| 19 | All as per item No 2 here-in-before buthousing bolt high tension. |
| 20 | All as per item No 2 here-in-before but main drive pulley bolt . |
| 21 | All as per item No 2 here-in-before buthose pipe drain 50 mm. |
| 22 | All as per item No 2 here-in-before buthose pipe for detergents of size 50 mm . |
| 23 | All as per item No 2 here-in-before but3 way water solenoid valve. |
| 24 | All as per item No 2 here-in-before but door gasket . |
| 25 | All as per item No 2 here-in-before butoil seal . |
| 26 | All as per item No 2 here-in-before but\" O\" ring . |
| 27 | All as per item No 2 here-in-before butrear bearing . |
| 28 | All as per item No 2 here-in-before butfront bearing. |
| 29 | All as per item No 2 here-in-before butdrain valve . |
| 30 | All as per item No 2 here-in-before but\" V \" belt . |
| 31 | All as per item No 2 here-in-before butmotor pulley. |
| 32 | All as per item No 2 here-in-before but door limit switch. |
| 33 | All as per item No 2 here-in-before but mechanical door lock. |
| 34 | All as per item No 2 here-in-before buttemperature sensor probe . |
| 35 | All as per item No 2 here-in-before butemergency stop push button . |
| 36 | All as per item No 2 here-in-before butSMPS. |
| 37 | All as per item No 2 here-in-before but contactor . |
| 38 | All as per item No 2 here-in-before butDoor Glass. |
| 39 | All as per item No 2 here-in-before but Door Glass outer ring including all fixing accessories. |
| 40 | All as per item No 2 here-in-before butShock Observer including all fixing accessories. |
| 41 | All as per item No 2 here-in-before butTension Spring including all fixing accessories. |
| 42 | S&F in replacement of steam heating coils copper tube and aluminium Fins suitable for Drying Tumbler- 60Kg capacity, Make- FABCARE, complete all as specified and as directed. |
| 43 | All as per item No 41 here-in-before but Steam Trape. |
| 44 | All as per item No 41 here-in-before but Bye Pass Assembly S.S. Ball valves. |
| 45 | All as per item No 41 here-in-before but Automatic Steam inlet valve. |
| 46 | All as per item No 41 here-in-before but Pneumatic Pipes & Fittings. |
| 47 | All as per item No 41 here-in-before but Aluminium Blowers. |
| 48 | All as per item No 41 here-in-before but Rubber Packing for lint screen. |
| 49 | All as per item No 41 here-in-before but Door Latches for lint screen. |
| 50 | All as per item No 41 here-in-before but Door Limit Switch. |
| 51 | All as per item No 41 here-in-before but Timer. |
| 52 | All as per item No 41 here-in-before but Timer Rev - Fwd. |
| 53 | All as per item No 41 here-in-before but contactor. |
| 54 | All as per item No 41 here-in-before but MPD. |
| 55 | All as per item No 41 here-in-before but DTC (Digital Temperature Controller). |
| 56 | All as per item No 41 here-in-before but Thermo Couple. |
| 57 | All as per item No 41 here-in-before butmotor pulley. |
| 58 | All as per item No 41 here-in-before butMain IDLER Bearing + sleeves. |
| 59 | All as per item No 41 here-in-before butMain Drive Bearing + Sleeves. |
| 60 | All as per item No 41 here-in-before but \" V \" belt - idler drive . |
| 61 | All as per item No 41 here-in-before but \" V \" belt - main drive . |
| 62 | All as per item No 41 here-in-before but door gasket for tumbler . |
| 63 | All as per item No 41 here-in-before butdoor Glass for tumbler. |
| 64 | All as per item No 41 here-in-before butdoor Glass outer ring for tumbler. |
| 65 | All as per item No 41 here-in-before but antivibration pad . |
| 66 | All as per item No 41 here-in-before but door handle with latch . |
| 67 | All as per item No 41 here-in-before but bearing of electric motor. |
| 68 | S&F in replacement Flannel Cloth suitable for Flat Work Ironer, Size-830mm X 3300mm ,Make- FABCARE, complete all as specified and as directed. |
| 69 | All as per item No 67 here-in-before but Final Cover. |
| 70 | All as per item No 67 here-in-before but Conveyor Belts Imported with hook & pin. |
| 71 | All as per item No 67 here-in-before but Guide Tape. |
| 72 | All as per item No 67 here-in-before but roller Bearing Set for gear side. |
| 73 | All as per item No 67 here-in-before but roller Bearing Set for blower side. |
| 74 | All as per item No 67 here-in-before but roller Bearing Set for conveyor roller. |
| 75 | All as per item No 67 here-in-before but Flexible S.S. Hose Pipes. |
| 76 | All as per item No 67 here-in-before but VFD (Variable Frequency Drive). |
| 77 | All as per item No 67 here-in-before but V-Belts. |
| 78 | All as per item No 67 here-in-before but FRL. |
| 79 | All as per item No 67 here-in-before but Pneumatic Fitting & Pneumatic Pipe. |
| 80 | All as per item No 67 here-in-before but Temperature Meter. |
| 81 | All as per item No 67 here-in-before but Thermo Couple. |
| 82 | All as per item No 67 here-in-before but Gripper for Duffle Roll. |
| 83 | All as per item No 67 here-in-before but Steam Trape with complete assembly includingsteam valve. |
| 84 | All as per item No 67 here-in-before but Ball Valve for Steam Trape. |
| 85 | All as per item No 67 here-in-before but Limit Switch. |
| 86 | All as per item No 67 here-in-before but Pressure Gauge. |
| 87 | All as per item No 67 here-in-before butAir Regulator Front Side. |
| 88 | All as per item No 67 here-in-before but Contactor. |
| 89 | All as per item No 67 here-in-before but Single Phase Preventer. |
| 90 | All as per item No 67 here-in-before but O/L Relay. |
| 91 | All as per item No 67 here-in-before but 4\" Flexible pipe blower Exhaust. |
| 92 | All as per item No 67 here-in-before but Solenoid Valve. |
| 93 | All as per item No 67 here-in-before but Main Pneumatic Air Cylinder. |
| 94 | All as per item No 67 here-in-before but Main Motor suitable. |
| 95 | All as per item No 67 here-in-before but Blower Motor. |
| 96 | All as per item No 67 here-in-before but Gear Box. |
| 97 | All as per item No 67 here-in-before but Main Gear + Pinion Set. |
| 98 | All as per item No 67 here-in-before but Angle Valve for Steam Inlet. |
| 99 | All as per item No 67 here-in-before butpolyester padding. |
| 100 | All as per item No 67 here-in-before but gear drive pulley . |
| 101 | S & F in repair Air solenoid valve for flat bed press , Pneumatically operated , Make - Fabcare complete all as specified and directed. |
| 102 | All as per item No 100 here-in-before butcoir padding . |
| 103 | All as per item No 100 here-in-before but silicon form padding. |
| 104 | All as per item No 100 here-in-before but steam hose pipe. |
| 105 | All as per item No 100 here-in-before but airhose pipe. |
| 106 | All as per item No 100 here-in-before but pneumatic cylinder . |
| 107 | All as per item No 100 here-in-before but tension spring . |
| 108 | All as per item No 100 here-in-before but contactor. |
| 109 | S&F in replacement single solenoid valve suitable forVacuum steam Ironing finishing table machine ,Make- FABCARE, complete all as specified and as directed. |
| 110 | All as per item No 108 here-in-before but hand iron. |
| 111 | All as per item No 108 here-in-before but contactor block NO+NC. |
| 112 | All as per item No 108 here-in-before butcontactor. |
| 113 | All as per item No 108 here-in-before but door gaskit. |
| 114 | All as per item No 108 here-in-before but FRL. |
| 115 | All as per item No 108 here-in-before but Limit switch. |
| 116 | All as per item No 108 here-in-before butMPD. |
| 117 | All as per item No 108 here-in-before butPneumatic Actuator fitted butterfly Valve. |
| 118 | All as per item No 108 here-in-before but Pressure switch suitable. |
| 119 | All as per item No 108 here-in-before butReversing timer. |
| 120 | All as per item No 108 here-in-before butSS casting ball valve steam inlet. |
| 121 | All as per item No 108 here-in-before but temprature meter. |
| 122 | All as per item No 108 here-in-before but thermocouple. |
| 123 | All as per item No 108 here-in-before but silicon form padding. |
| 124 | All as per item No 108 here-in-before but padding cloth cover . |
| 125 | All as per item No 108 here-in-before but silicon iron rest pad . |
| 126 | All as per item No 108 here-in-before but paddle micro switch . |
| 127 | S&F in replacement Main Water Inlet Valve (Actuator Butterfly Valve) suitable for Washer Extractor - 60 Kg capacity, Make- FABCARE,complete all as specified and as directed. |
| 128 | All as per item No 126 here-in-before but Main Steam Inlet Valve Automatic. |
| 129 | All as per item No 126 here-in-before but Main Drive Aluminium Pulley. |
| 130 | All as per item No 126 here-in-before but Main Bearing Circlip. |
| 131 | All as per item No 126 here-in-before but Pneumatic Fitting (Tee, Elbow, Connector). |
| 132 | All as per item No 126 here-in-before but Pneumatic Pipe. |
| 133 | All as per item No 126 here-in-before but Clamps 4\" Heavy Fabricated S.S. |
| 134 | All as per item No 126 here-in-before but FRL Set. |
| 135 | All as per item No 126 here-in-before but S.S Screws (For Main Cover). |
| 136 | All as per item No 126 here-in-before but Allen Key Bolt for main Housing. |
| 137 | All as per item No 126 here-in-before but Door Lock Latch Handle. |
| 138 | All as per item No 126 here-in-before but Thermo Couple. |
| 139 | All as per item No 126 here-in-before but VFD (Variable Frequency Drive). |
| 140 | All as per item No 126 here-in-before but Display Controller (AXW Controller). |
| 141 | All as per item No 126 here-in-before but bearing housing. |
| 142 | All as per item No 126 here-in-before but main bearing housing seal cover. |
| 143 | All as per item No 126 here-in-before buthousing bolt high tension. |
| 144 | All as per item No 126 here-in-before but main drive pulley bolt . |
| 145 | All as per item No 126 here-in-before buthose pipe drain 50 mm. |
| 146 | All as per item No 126 here-in-before buthose pipe for detergents of size 50 mm . |
| 147 | All as per item No 126 here-in-before but3 way water solenoid valve. |
| 148 | All as per item No 126 here-in-before but door gasket . |
| 149 | All as per item No 126 here-in-before butoil seal . |
| 150 | All as per item No 126 here-in-before but\" O\" ring . |
| 151 | All as per item No 126 here-in-before butrear bearing . |
| 152 | All as per item No 126 here-in-before butfront bearing. |
| 153 | All as per item No 126 here-in-before butdrain valve . |
| 154 | All as per item No 126 here-in-before but\" V \" belt . |
| 155 | All as per item No 126 here-in-before butmotor pulley. |
| 156 | All as per item No 126 here-in-before but door limit switch. |
| 157 | All as per item No 126 here-in-before but mechanical door lock. |
| 158 | All as per item No 126 here-in-before buttemperature sensor probe . |
| 159 | All as per item No 126 here-in-before butemergency stop push button . |
| 160 | All as per item No 126 here-in-before butSMPS. |
| 161 | All as per item No 126 here-in-before butcontactor . |
| 162 | All as per item No 126 here-in-before butDoor Glass. |
| 163 | All as per item No 126 here-in-before but Door Glass outer ring including all fixing accessories. |
| 164 | All as per item No 126 here-in-before butShock Observer including all fixing accessories. |
| 165 | All as per item No 126 here-in-before butTension Spring including all fixing accessories. |
| 166 | S&F in replacement Main Water Inlet Valve (Actuator Butterfly Valve) suitable for Washer Extractor - 30 Kg capacity, Make- FABCARE,complete all as specified and as directed. |
| 167 | All as per item No 165 here-in-before but Main Steam Inlet Valve Automatic. |
| 168 | All as per item No 165 here-in-before but Main Bearing Circlip. |
| 169 | All as per item No 165 here-in-before but Pneumatic Fitting (Tee, Elbow, Connector). |
| 170 | All as per item No 165 here-in-before but Pneumatic Pipe. |
| 171 | All as per item No 165 here-in-before but Clamps 4\" Heavy Fabricated S.S. |
| 172 | All as per item No 165 here-in-before but FRL Set. |
| 173 | All as per item No 165 here-in-before but S.S Screws (For Main Cover). |
| 174 | All as per item No 165 here-in-before but Allen Key Bolt for main Housing. |
| 175 | All as per item No 165 here-in-before but Door Lock Latch Handle. |
| 176 | All as per item No 165 here-in-before but Thermo Couple. |
| 177 | All as per item No 165 here-in-before but VFD (Variable Frequency Drive). |
| 178 | All as per item No 165 here-in-before but Display Controller (AXW Controller). |
| 179 | All as per item No 165 here-in-before but bearing housing. |
| 180 | All as per item No 165 here-in-before but main bearing housing seal cover. |
| 181 | All as per item No 165 here-in-before buthousing bolt high tension. |
| 182 | All as per item No 165 here-in-before but main drive pulley bolt . |
| 183 | All as per item No 165 here-in-before buthose pipe drain 50 mm. |
| 184 | All as per item No 165 here-in-before buthose pipe for detergents of size 50 mm . |
| 185 | All as per item No 165 here-in-before but3 way water solenoid valve. |
| 186 | All as per item No 165 here-in-before but door gasket . |
| 187 | All as per item No 165 here-in-before butoil seal . |
| 188 | All as per item No 165 here-in-before but\"O\" ring . |
| 189 | All as per item No 165 here-in-before butrear bearing . |
| 190 | All as per item No 165 here-in-before butfront bearing. |
| 191 | All as per item No 165 here-in-before but drain valve . |
| 192 | All as per item No 165 here-in-before but\" V \" belt . |
| 193 | All as per item No 165 here-in-before butmotor pulley. |
| 194 | All as per item No 165 here-in-before but door limit switch. |
| 195 | All as per item No 165 here-in-before but mechanical door lock. |
| 196 | All as per item No 165 here-in-before buttemperature sensor probe . |
| 197 | All as per item No 165 here-in-before butemergency stop push button . |
| 198 | All as per item No 165 here-in-before butSMPS. |
| 199 | All as per item No 165 here-in-before but contactor . |
| 200 | All as per item No 165 here-in-before butDoor Glass. |
| 201 | All as per item No 165 here-in-before but Door Glass outer ring including all fixing accessories. |
| 202 | All as per item No 165 here-in-before butShock Observer including all fixing accessories. |
| 203 | All as per item No 165 here-in-before butTension Spring including all fixing accessories. |
| 204 | S & F in repair Air solenoid valve for general utility press machine , Pneumatically operated , Make - Fabcare complete all as specified and directed. |
| 205 | All as per item No 203 here-in-before butcoir padding. |
| 206 | All as per item No 203 here-in-before but silicon form padding. |
| 207 | All as per item No 203 here-in-before but steam hose pipe. |
| 208 | All as per item No 203 here-in-before but air hose pipe. |
| 209 | All as per item No 203 here-in-before but pneumatic cylinder. |
| 210 | All as per item No 203 here-in-before but tension spring. |
| 211 | All as per item No 203 here-in-before but contactor. |
| 212 | M & L for disconnecting and dismantling of electric motor of 5 HP capacity , strip opening the unserviceable motor at site to located the fault and transporting to the local work shop . Strip openingthe motor and cutting/removing burnt out winding and rewinding the motor with as per existing original wire guage super enammelled copper wire including high quality\"F\" class insulating material with heat resistant sleeves, sealing compoundand varnishing and heating the stator upto varnish fully dry and testing the motor at work shop to the satisfaction of Engr-in-charge. Refix the motor with machine and installed at site as per existing position.Testing themachine after completion of work all as specified . |
| 213 | All as per item No 211 here-in-above but 2 HP. |
| 214 | All as per item No 211 here-in-above but 1 HP. |
| 215 | S & F in repairPLC of Industrial drying tumbler 60 KG Capacity including all nesessary wiring, programming complete all as specified and directed. |
| 216 | S & F in repairPLC of Flat work Ironer including all nesessary wiring, programming complete all as specified and directed. |
| 217 | M & L for preparation of surface by removing old paint by scraping with scrap paper/ sand paper and painting by applying two coat of super enamel synthetic paint (colour as specified by OEM)over a one coat of red oxide paint of Drying tumbler 60 Kg capacity/ Flat works ironer machine/ flat bed press machine/ General utility press machine/ Vaccum steam ironing machine including base frame of machine installed at laundry plant complete all as specified and as directed. Note : Work should be done by OEM or authorised service agent only and Each. |
| 218 | Note : All spare parts from item No. 2.00 to 215.00 should be M/s Fabcare and also work done by OEM (M/s Fabcare) or Authorised service agents only. |