Tender For Construction Work Of Road From Idgah Shamli Road To Sujju Chungi Meerut Road Link Road 40 Feet Road Double Pillar Alauddins House To Shabus Mill In Ward No. 3 And Ward No. 54 Of Muzaffarnagar City
Tender Value
1.21 Crore
Estimated cost
Bid Submission
13 Jan 2025
0 days left
EMD
2.43 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
muzaffarnagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction work of road from Idgah Shamli Road to Sujju Chungi Meerut Road link road 40 feet road double pillar Alauddins house to Shabus mill in ward no. 3 and ward no. 54 of Muzaffarnagar city
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Granular sub-base providing coarse graded material Grade-1 (Table no 400-2). Spreading in unifrorm in layes with motor grader on prepared surface, mixing by Mix in place method with rotavator at OMC, and compacting with smooth wheeled roller to achive the desired density, complete as per Clause 401 of MORT&H (A.R.) |
| 2 | RCC work with cement, approved Coarse sand and 20mm stone grit in proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (S.I. No. 284a/2022) |
| 3 | Cement concrete with 2cm gauge approved stone grit, coarse sand & cement in proportion of 1:1.5:3 in cc pavment (thickness as per design) cement coarse & fine aggregate confirming to IS standred mixed inconcrete mixer/plant of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed from work(steel channel) laying & fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work spreding the concrete with shovles. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion cloth for curring of concrete pavments for not less then 14 days, curing compound (Where specified) and water finishing to lines and gradeincludings supply of all materials, labour Tools &plants etc. required for proper completion of work andalso includin complete shifting ofRecron38 fibre reinforcement materials etcl & concrete etc S.I. No. New Item 9/2022 |
| 4 | Supply and Laying of 80mm thick ISI marked I shaped/other approved shaped mechanically compressed interlocking cement concrete paver blocks with top layer of minimum 5 mm thickness of O.P. cement having plan dimension 200x(160+120mm), smooth high gloss finish, skid resistantmanufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver blocks shall not be less than 40Mpa and weight 4.5 kg per no. confirming to IS:15658-2006 including cost of all materials, labour, T&P etc., laying with a blanket layer of 4.00 cm thick local sand including leveling and dressing surface up to required level and slope filling joints with local sand i/c all required for proper completion of the work as directed by Engineer-in- charge and as per drawing & technical specification of clause 1504. |
| 5 | M.S (Tor steel or plain) work in plain work such as RCC or RB work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire (S.I. No. 504/2022) A.R. |
| 6 | M-150 Brick Work in 1:4 one cement and four coarse sand of 1.25 FM mortar in foundation and plinth including supply of all materials, labour , T&P etc. required for proper completion of the work. SI No. 305(a)/2022 |
| 7 | 12mm thick plaster with cement and fine sand in 1:4 over brick work minimum thickness not to be less than 1cm thick including supply of all materials, labour and T & P etc. required for proper completion of the work.outer side of stage. SI. No. 584/2022 |
| 8 | Supply and fixing of Murga Jali 1/2\"X24 gauge. S.I. No New Item iii (After 20 Ch-1Material) |
AI Tender Summary
Tender Timeline
Dec 30, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 13, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 14, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender